Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD errors, Unknown Cause

05 Aug 2013   #11
jeffpkamp

Windows 7 Ultimate x64
 
 

so I don't know if these contain the newest minidmp files. I just went into the folder through ubuntu and copied them over.

As for the bad slot theory, I tried running on a single stick but kept getting errors, no matter which stick I used or what slot I used...

If I can get back into windows I will update the GeForce Driver.

Again, thanks for the help.


My System SpecsSystem Spec
.
05 Aug 2013   #12
jeffpkamp

Windows 7 Ultimate x64
 
 

okay, I got windows to boot again. In bios I have the options of AHCI or compatability mode for the sata controller. I swear its always been the AHCI setting, but changing it to compatability mode allowed windows to start.

Would you suggest staying away from the newer bios, or should I reflash it and try with the new sata settings?
My System SpecsSystem Spec
05 Aug 2013   #13
YoYo155

Windows 10
 
 

Flashing the BIOS is like heart surgery and its best to avoid when possible.
I am away from my computer at the moment so I will look more into it when I can.
My System SpecsSystem Spec
.

05 Aug 2013   #14
jeffpkamp

Windows 7 Ultimate x64
 
 

I am down to a single stick of RAM that I know is good in a single slot. Just had a crash in which the MOBO stopped recognizing that slot. I have now switched the ram over to the other slot and am waiting to see what will happen. The crash data went to the full memory dump, which I am not sure how to upload due to its size (66mb compressed).

Let me know how, and I will attach it.
My System SpecsSystem Spec
05 Aug 2013   #15
YoYo155

Windows 10
 
 

Quote   Quote: Originally Posted by jeffpkamp View Post
I am down to a single stick of RAM that I know is good in a single slot. Just had a crash in which the MOBO stopped recognizing that slot. I have now switched the ram over to the other slot and am waiting to see what will happen. The crash data went to the full memory dump, which I am not sure how to upload due to its size (66mb compressed).

Let me know how, and I will attach it.
How did you determine that RAM module is good?
How many passes did you run it?
When was the last time you've checked it?
You can attach it to your skydrive or something similar
My System SpecsSystem Spec
05 Aug 2013   #16
jeffpkamp

Windows 7 Ultimate x64
 
 

This is a stick from a laptop that has never given me trouble in 2+ years. I also tested it 10+ cycles with Memtest86+, no errors were found.

here is the link for the memory dump. So far no crash using slot #2.

https://skydrive.live.com/redir?resi...HJqkOa5qCE3zjs
My System SpecsSystem Spec
05 Aug 2013   #17
YoYo155

Windows 10
 
 

The MEMORY.DMP:
Code:
**************************************************************************
THIS DUMP FILE IS PARTIALLY CORRUPT.
KdDebuggerDataBlock is not present or unreadable.
**************************************************************************
Unable to read PsLoadedModuleList
**************************************************************************
THIS DUMP FILE IS PARTIALLY CORRUPT.
KdDebuggerDataBlock is not present or unreadable.
**************************************************************************
KdDebuggerData.KernBase < SystemRangeStart
Windows 7 Kernel Version 7601 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x00000000`00000000 PsLoadedModuleList = 0xfffff800`032a5670
Debug session time: Mon Aug  5 23:16:56.499 2013 (UTC + 3:00)
System Uptime: 0 days 0:53:48.919
**************************************************************************
THIS DUMP FILE IS PARTIALLY CORRUPT.
KdDebuggerDataBlock is not present or unreadable.
**************************************************************************
Unable to read PsLoadedModuleList
**************************************************************************
THIS DUMP FILE IS PARTIALLY CORRUPT.
KdDebuggerDataBlock is not present or unreadable.
**************************************************************************
KdDebuggerData.KernBase < SystemRangeStart
Loading Kernel Symbols
Unable to read PsLoadedModuleList
GetContextState failed, 0xD0000147
CS descriptor lookup failed
GetContextState failed, 0xD0000147
GetContextState failed, 0xD0000147
GetContextState failed, 0xD0000147
GetContextState failed, 0xD0000147
Unable to get program counter
GetContextState failed, 0xD0000147
Unable to get current machine context, NTSTATUS 0xC0000147
GetContextState failed, 0xD0000147
GetContextState failed, 0xD0000147
Code:
 !error 0xC0000147
GetContextState failed, 0xD0000147
GetContextState failed, 0xD0000147
Unable to get program counter
Error code: (NTSTATUS) 0xc0000147 (3221225799) - {No Paging File Specified}  No paging file was specified in the system configuration.
Make sure of this | Dump Files - Configure Windows to Create on BSOD


Reset your Page File:

1. Start Menu> Run >type control.exe system
and press the Enter key.
A windows will open and on the Left hand side you will see Advanced system settings, click it.



2.
Next click on the Advanced tab and Settings which correspond to the Performance section;



3. Then the Advanced tab once more and click on the Change button;



4. Untick the checkbox next to Automatically manage paging file size for all drives;



5. Select No paging file and Click on the Set button;


6. Confirm all the windows.

7.
Restart the PC.

8. Reverse the procedure, by following steps 1-3, only this time select System managed size
and click the Set button;



9. Recheck the box next to Automatically manage paging file size for all drives
and exit the windows by clicking the OK button;



10. Confirm all of the remaining windows by click the OK button
and restart once again to take affect.
My System SpecsSystem Spec
06 Aug 2013   #18
jeffpkamp

Windows 7 Ultimate x64
 
 

okay, I reset the page file. Also have a symptom that might suggest that this is actually a mother board issue. Sometmes when I start up the computer, it will get past bios and post "No Operating System Detected". If I reset it, it goes away, but that makes me think that it's more than memory or drivers causing this problem.
My System SpecsSystem Spec
06 Aug 2013   #19
YoYo155

Windows 10
 
 

Quote   Quote: Originally Posted by jeffpkamp View Post
okay, I reset the page file. Also have a symptom that might suggest that this is actually a mother board issue. Sometmes when I start up the computer, it will get past bios and post "No Operating System Detected". If I reset it, it goes away, but that makes me think that it's more than memory or drivers causing this problem.
Have you had any issues since switching to one RAM slot?

P.S. after resetting the page file, activating it the 2nd time don't forget to restart the PC again to take affect!
My System SpecsSystem Spec
06 Aug 2013   #20
jeffpkamp

Windows 7 Ultimate x64
 
 

i might have... I started my computer this morning after turning off the paging, and when I came back it was off (or at least the power was on, but the computer was not, much like it does after a BSOD sometimes), but Paging was off, so if it did, it left no record of it, and since I didn't catch it in the act, I can't say for sure .

I"ll let you know if it does it again now that I turned paging on and reset the computer.
My System SpecsSystem Spec
Reply

 Multiple BSOD errors, Unknown Cause




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
Multiple BSODs (Occurs at start-up or random intervals) unknown errors
Hello all, I hope you all are well, I've been having issues with this computer and I'm not quite too sure what the issue is, I'm trying to post this quickly before I have another BSOD lol. I will edit it later and include more information such as specific hardware components. Thank you for your...
BSOD Help and Support
Multiple BSOD's with multiple errors occuring randomly
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle! So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
New computer, BSOD every day, unknown reason. multiple errors.
64 bit original full retail windows 7 ultimate system installed on brand new hardware < 3 months. completely new computer and I can't get it to stop BSOD. What might be my problem? I was completely fine on my old computer until a power outage fried all my components, I went out and bought a WHOLE...
BSOD Help and Support
Need BSOD Help, Multiple unknown crashes
I started this thread last week. http://www.sevenforums.com/crashes-debugging/139420-multiple-bsod-minidump-after-installing-7-ultimate.html Since then I have tried multiple things to fix my Blue Screen problems, none of them have worked and I am still receiving blue screens. I am starting...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:54.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App