Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD errors, Unknown Cause

08 Aug 2013   #31
jeffpkamp

Windows 7 Ultimate x64
 
 

Stable for the last five hours since I changed the power settings to the ones you set.

What did you change in the power settings???

Here is the minidump from the crash I had after we turned of DV and changed the power settings back....


My System SpecsSystem Spec
.
08 Aug 2013   #32
YoYo155

Windows 10
 
 

I changed the CPU minimum to 50% from the default 5%.
I had a hunch about the fact that your PC was stable with DV enabled, meaning it was working harder than normal.
So by changing the Power-Saving I'm preventing the CPU clock from dropping to low.
My System SpecsSystem Spec
09 Aug 2013   #33
jeffpkamp

Windows 7 Ultimate x64
 
 

ran through the night fine, however when I went to wake it up this morning from sleep, it crashed. I"m attaching the crash dump. If you are right that it is somehow a low power to the processor problem, it could be the transistion from sleep to active that did this. Here is the dump file.
My System SpecsSystem Spec
.

09 Aug 2013   #34
YoYo155

Windows 10
 
 

Download and install | Aida64 - Trail
Launch the tool.

Go to: Tools> System Stability Test (don't run the test).
Take a screenshot of the Statistics Tab with different configurations:
  • Working off of the battery alone. (Name the file Config A)
(Screenshot after 15min) - Before each new configuration Click the "Clear" button at the bottom of the Statistics tab.
  • working with the battery and plugged into the power-brick. (Name the file Config B)
(Screenshot after 15min)
  • Shutdown the PC completely! and unplug the power-brick, before you continue!
  • Without the battery inserted into the PC, plugged into the power-brick. (Name the file Config C)
(Screenshot after 15min)


My System SpecsSystem Spec
09 Aug 2013   #35
jeffpkamp

Windows 7 Ultimate x64
 
 

I updated that value added driver, and I"m worried that may be the source of the crashes, I did a system restore, but I don't know where to check the date on the driver. I'm going to see if it crashes now that I did the system restore.

Also the program you told me to download doesn't show all those details on the trial version, all I am getting is CPU temps.
My System SpecsSystem Spec
09 Aug 2013   #36
jeffpkamp

Windows 7 Ultimate x64
 
 

The errors I am getting are different from before. Apparently I switched the dumps to kernal dumps at some point, so I missed them. I however just got the last one as a mini dump and the last kernal dump I was able to compress to a reasonable size. Here they both are.
My System SpecsSystem Spec
09 Aug 2013   #37
YoYo155

Windows 10
 
 

The last dumps are corrupt.
The Kernel Dump option is the default in Windows 7, minidumps are still getting created in C:\Windows\minidump folder.

It's due to it being a laptop.
I find Aida64 more reliable that is why I opted to use it, but it doesn't answer our needs this time.

Follow what I asked above but only with CPUID - HWMonitor
My System SpecsSystem Spec
09 Aug 2013   #38
jeffpkamp

Windows 7 Ultimate x64
 
 

okay, so now the computer is totally screwed I think. It has started failing at windows start.

I tried running system restore, but it crashes at the start of system restore.

I tried running system restore from the install disk, and it gave me the system_management_error BSOD there also.

Not sure if there is anything I can do now...
My System SpecsSystem Spec
09 Aug 2013   #39
YoYo155

Windows 10
 
 

Can you recall the changes you made prior to this situation?
My System SpecsSystem Spec
09 Aug 2013   #40
jeffpkamp

Windows 7 Ultimate x64
 
 

I was going to see if DV would stabilize it again, so I turned it on..., but that shouldn't be running when I put in the install disk.
My System SpecsSystem Spec
Reply

 Multiple BSOD errors, Unknown Cause




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
Multiple BSODs (Occurs at start-up or random intervals) unknown errors
Hello all, I hope you all are well, I've been having issues with this computer and I'm not quite too sure what the issue is, I'm trying to post this quickly before I have another BSOD lol. I will edit it later and include more information such as specific hardware components. Thank you for your...
BSOD Help and Support
Multiple BSOD's with multiple errors occuring randomly
Just realized I uploaded the wrong zip folder, It doesn't have everything in it. Fixed that now though! Sorry about the hassle! So I built my own PC a a good few months back, and within a month I experienced a BSOD, and now they are very frequent. They can happen three or four times a day, or...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
New computer, BSOD every day, unknown reason. multiple errors.
64 bit original full retail windows 7 ultimate system installed on brand new hardware < 3 months. completely new computer and I can't get it to stop BSOD. What might be my problem? I was completely fine on my old computer until a power outage fried all my components, I went out and bought a WHOLE...
BSOD Help and Support
Need BSOD Help, Multiple unknown crashes
I started this thread last week. http://www.sevenforums.com/crashes-debugging/139420-multiple-bsod-minidump-after-installing-7-ultimate.html Since then I have tried multiple things to fix my Blue Screen problems, none of them have worked and I am still receiving blue screens. I am starting...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:11.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App