Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x0000000A, new PC Build, possibly memory?

07 Aug 2013   #11
Nathan Atkins

Windows 7 Professional x64 SP1
 
 

Just to update everyone, there were not any BSOD's last night so I could not attach any minidump files.

I am today going to send this motherboard back and buy an ASUS Z87-K instead, I will update things when I recieve the new motherboard. Which slightly annoyingly could be around a week. Especially since I have work to do!


My System SpecsSystem Spec
.
07 Aug 2013   #12
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

Just make sure your peripherals; memory, HDD, Graphics card, keyboard, mouse, display monitor are compatible especially those last three. You don't want to have to go back and purchase new connectors or adapters.
My System SpecsSystem Spec
07 Aug 2013   #13
x BlueRobot

 

Thanks for the update
My System SpecsSystem Spec
.

29 Aug 2013   #14
Nathan Atkins

Windows 7 Professional x64 SP1
 
 

I do not want to comment too early here, but it looks like the problem is solved.

I recieved the ASUS Z87K motherboard (old one was Gigabyte Z87-HD3) recently and the machine has been running stably (apart from a few update issues, which i think i have resolved) without any BSOD's (So far, so hopefully!)

Novatech did find a bent CPU pin on my old board, which is most likely what caused the BSOD's anyway, but I ordered the ASUS one just in case. I realise this hasnt fully got to the bottom of what was causing it but I may aswell treat all eventualities.

Thank you every one that helped for your suggestions and comments!

Nathan

P.S. the new install was built with two sticks of 4GB RAM in place, and so the Issue Anak found some people had was not an Issue here - Thank you any way Anak
My System SpecsSystem Spec
29 Aug 2013   #15
Anak

Microsoft Community Contributor Award Recipient

Win 7 Home Premium 64bit Ver 6.1.7600 Build 7601 - SP1
 
 

Your welcome,

Glad to hear the new change is working for you, (fingers crossed)
My System SpecsSystem Spec
Reply

 BSOD 0x0000000A, new PC Build, possibly memory?




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Constant BSOD's possibly memory related
I have been recently receiving BSOD's of all shapes and forms, from what I can tell it seems to be memory related, I used to have an error refer to this threadbut this was resolved, however may be related. My current specifications are as follows: Intel core i5 3570k Ivy Bridge OC's to 4.1Ghz...
BSOD Help and Support
BSOD (random) possibly after computer when to sleep, error 0x0000000A
I've seen random BSOD. 0) I run Windows memory test again and no errors found 1) First I suspected of eSata interface, but this was a guess, there was not really any proof 2) I suspected of a SW called MagicISO because I saw some reports about BSOD (but a guess again) 3) Then I suspected of...
BSOD Help and Support
New computer build freezes and bsod possibly memory or drivers
My computer blue screens a lot with different errors such as memory_management error or pfn_list corrupt. So I originally assumed it was the memory. I ran the windows memory diagnostic and it didn't get any errors. Then I ran memtest for a few hours and no errors either. Also when I ran the...
BSOD Help and Support
BSOD possibly caused by dtsoftbus01 on new build
Hi guys, I've been getting a BSOD sometimes on start up or shortly after. I've used the debugger to check the dump file and the driver that would appear to be faulty is dtsoftbus01 which from what I read is daemon tools. I had daemon tools on this computer at one point in time but I've since...
BSOD Help and Support
BSOD, possibly memory?
Long story short, i've been getting BSOD's for a while and originally thought it was down to a dodgy stick of ram (Ballistix PC2-5300 BL2KIT12864AA663.8FE4) which didn't like running at the correct timings (3-3-3-12 @ 2.1/2.2v). Pulled this and the system seemed to be ok. But recently i've been...
BSOD Help and Support
BSOD - Possibly memory issues?
I've had 3 BSODs in the past couple days. One occurred this morning, and then again 5 hours later, the previous one was from 5 days ago. I'm not quite sure what's going on, sounds like it may just be Win 7 having some problems :huh: I'm running: Windows 7 x64 Pro 8GB ram (passed overnight...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App