Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSODs on a new haswell build, unsure of cause

09 Aug 2013   #1
defofsuccess

Windows 7 Professional x64
 
 
Multiple BSODs on a new haswell build, unsure of cause

Hi guys,

Just built a new PC with all the specs in my profile and it suffers from multiple BSODs. I've reformatted the SSD multiple times off a win7pro flashdrive but it just keeps happening.

All the BSODs point to a "typical software driver issue" or RAM issue. It's just a revolving circle! I can't figure out which driver it is even though i've ran the verifier. Chkdsk has no issues, and whocrashed tells me its RAM or some unknown driver.

The dumps are attached, any help would be greatly appreciated!


My System SpecsSystem Spec
.
09 Aug 2013   #2
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

Have you tried booting with just 1 stick of ram in the #1 slot?
My System SpecsSystem Spec
09 Aug 2013   #3
defofsuccess

Windows 7 Professional x64
 
 

I haven't tried just that, i took two sticks out of the 3 and 4 slots and that seemed to make the system a little more stable. I'll try that when the computer BSODs again in a few minutes.

EDIT:

I should note that i just installed SP1, upon successful installation the computer BSOD'd and gave me a 1000007e.

One stick of ram is currently in the 1st slot.
My System SpecsSystem Spec
.

09 Aug 2013   #4
defofsuccess

Windows 7 Professional x64
 
 

Oh and i should note i ran memtest with 16 GB of RAM and no errors showed up.
My System SpecsSystem Spec
09 Aug 2013   #5
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

So does the system boot to the start screen and work then BSOD's?
My System SpecsSystem Spec
09 Aug 2013   #6
defofsuccess

Windows 7 Professional x64
 
 

The system works, boots up, crashes anywhere from 10-30 minutes.

I just installed SP1 and some subsequent updates and it BSOD'd. Gave me an f4.
My System SpecsSystem Spec
09 Aug 2013   #7
defofsuccess

Windows 7 Professional x64
 
 

So i rechecked the reviews for my mobo on newegg, turns out there's a few issues with RAM compatibility. Some 4 x 4 GB setups wont work.

I checked the compatibility list from Gigabyte, and the model of RAM i have isn't "supported".

I say "supported" because the 2 GB, 8 GB, and 16 GB variants are all listed.

Could that be the issue?
My System SpecsSystem Spec
09 Aug 2013   #8
linnemeyerhere

Microsoft Community Contributor Award Recipient

Windows 7 Ultimate 64
 
 

I will let someone with more BSOD experience step in but yes ram can be problematic in many ways and it's kind of a case by case thing. You can also number the sticks and try them in different orders in the slots to find a combo that works. As 16gb as I have is tons maybe try combos of two for 8gb total as well. Otherwise provide the crash information as the BSOD team requests and someone can read it for any other details. Good news is if it is the ram you can likely sell the G Skills and try a approved set. That being said my experience with G Skills has been flawless and I hope you can get them to play nice, cause they are great ram !
My System SpecsSystem Spec
Reply

 Multiple BSODs on a new haswell build, unsure of cause




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD randomly multiple times a day, unsure cause
Hi all, I know this is very ambiguous, but one of my Windows 7 computers at work, a Dell Optiplex 390, has repeatedly experienced BSOD crashes over the past year. This occurs when it is being used for web browsing, and when it is left on and not being actively used. Examining the system log...
BSOD Help and Support
Is it true with Haswell CPU you need a haswell ready PSU
I have heard people saying you need a Haswell Ready PSU or are people blowing it out of Proportion Reason i ask is i know Jake Sh*& about intel including Haswell
PC Custom Builds and Overclocking
Multiple BSOD's. "ntoskrnl.exe" in each dump. Unsure.
Hi SevenForums, I've had this computer for almost two years, with only one other glaring issue that was related to a faulty HD. However, over the past few days there have been several issues with the computer, the most serious of which were a series of BSOD's. Two days ago, my computer would...
BSOD Help and Support
Random BSoDs, unsure of error code.
Hi there! I've gotten some random BSoDs the last couple of days (and a few other instances before that), and I'm wondering what's wrong and what I can do to fix it. I didn't catch the error code, nor am I sure where I can find that, so I apologize if that information was required in the thread...
BSOD Help and Support
Multiple BSODs on new build
I just put together a new computer and after installing Windows 7 have gotten a number of blue screens at random intervals including stops a, 1e, and 7f. I've tried running it without the video card, without the ati catalyst drivers, but always get a blue screen after some amount of time. Usually...
BSOD Help and Support
bsods, new build
hello, first i want to thank everyone in advance for helping out. this is a custom built computer, I've come across bsods namely after i install my display adapter drivers. I've reinstalled windows 7 twice and have come to the conclusion that i might need some help. I get a bsod one out of 2...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App