Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Laptop wakes up from sleep, then crashes after a few seconds.

14 Aug 2013   #1
darknightz0117

Windows 7
 
 
Laptop wakes up from sleep, then crashes after a few seconds.

Hello all,

So I've only noticed this recently since I usually am on AC power. These past few days, I've been using my battery. I've noticed that when I wake it up, I can punch in my password, no problem, then when it logs on, I have a few seconds where I can see my programs (Chrome, and maybe a Word document), and then everything becomes non-responsive. The taskbar disappears, and sometimes my desktop icons will disappear too. Then the computer shuts off, and reboots itself. I'm not sure what is going on. I've attached the SF Diagnostic files. Any help would be greatly appreciated.

If it helps:
-I am using an Asus U46e-BAL5 laptop (core i5)
-The primary drive is a Kingston HyperX 120GB SSD
-I took out the DVD drive and put in the original hard drive (Seagate 750GB)

All programs are installed on the SSD (and a few documents and random screenshots) and all downloads, movies, etc. are stored on the Seagate.

Thanks!


My System SpecsSystem Spec
.
14 Aug 2013   #2
x BlueRobot

 

Not all the files seem to be uploaded for some reason, please upload the files manually:

SystemInfo:

  1. Start
  2. Type: cmd > Right Click > Run as Administrator
  3. systeminfo.exe>C:\Systeminfo.txt
  4. Place in a zipped folder

MSINFO32:

  1. Start
  2. Type: msinfo32
  3. File, Save
  4. Place into a zipped folder

Upload the zipped folder in your post with Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
14 Aug 2013   #3
darknightz0117

Windows 7
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Not all the files seem to be uploaded for some reason, please upload the files manually:

SystemInfo:

  1. Start
  2. Type: cmd > Right Click > Run as Administrator
  3. systeminfo.exe>C:\Systeminfo.txt
  4. Place in a zipped folder

MSINFO32:

  1. Start
  2. Type: msinfo32
  3. File, Save
  4. Place into a zipped folder

Upload the zipped folder in your post with Screenshots and Files - Upload and Post in Seven Forums
Thanks! Here rare the other files you requested.
My System SpecsSystem Spec
.

14 Aug 2013   #4
x BlueRobot

 

Code:
BugCheck F4, {3, fffffa8007ef69e0, fffffa8007ef6cc0, fffff8000317e350}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe
Code:
2: kd> !process fffffa8007ef69e0 3
GetPointerFromAddress: unable to read from fffff800030af000
PROCESS fffffa8007ef69e0
    SessionId: none  Cid: 023c    Peb: 7fffffd9000  ParentCid: 0228
    DirBase: 1e9290000  ObjectTable: fffff8a005108b20  HandleCount: <Data Not Accessible>
    Image: csrss.exe
    VadRoot fffffa8011f00830 Vads 155 Clone 0 Private 1690. Modified 7812. Locked 1032.
    DeviceMap fffff8a000006090
    Token                             fffff8a0051b9060
    ReadMemory error: Cannot get nt!KeMaximumIncrement value.
fffff78000000000: Unable to get shared data
    ElapsedTime                       00:00:00.000
    UserTime                          00:00:00.000
    KernelTime                        00:00:00.000
    QuotaPoolUsage[PagedPool]         483232
    QuotaPoolUsage[NonPagedPool]      28688
    Working Set Sizes (now,min,max)  (4221, 50, 345) (16884KB, 200KB, 1380KB)
    PeakWorkingSetSize                6853
    VirtualSize                       211 Mb
    PeakVirtualSize                   220 Mb
    PageFaultCount                    16965
    MemoryPriority                    BACKGROUND
    BasePriority                      13
    CommitCharge                      2981
Code:
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
Code:
2: kd> k
Child-SP          RetAddr           Call Site
fffff880`02783e38 fffff800`03205d22 nt!KeBugCheckEx
fffff880`02783e40 fffff800`031b208b nt!PspCatchCriticalBreak+0x92
fffff880`02783e80 fffff800`03132144 nt! ?? ::NNGAKEGL::`string'+0x17486
fffff880`02783ed0 fffff800`02e76e93 nt!NtTerminateProcess+0xf4
fffff880`02783f50 fffff800`02e73450 nt!KiSystemServiceCopyEnd+0x13
fffff880`027840e8 fffff800`02ec281f nt!KiServiceLinkage
fffff880`027840f0 fffff800`02e77282 nt! ?? ::FNODOBFM::`string'+0x488e4
fffff880`02784900 fffff800`02e75dfa nt!KiExceptionDispatch+0xc2
fffff880`02784ae0 00000000`76da9c12 nt!KiPageFault+0x23a
00000000`00c41170 00000000`00000000 0x76da9c12
The problem seems to have resulted, due to a page fault which wasn't handled, the working set has already exceeded it's maximum value, I'm wondering the page fault couldn't be handled because there wasn't enough physical memory, and for some reason working set trimming wasn't carried out. However, because Stop 0xF4's are usually related to storage difficulties, then a driver may have referenced and accessed a page which wasn't in physical memory, and therefore had to paged from the disk, but it couldn't due to I/O problems.

--------------------------------------------------------------------------

Reduce the number of programs at startup, to avoid any driver or program conflicts:Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
Remove:

Code:
Start Menu\Programs\ASUS Utility\SmartLogon
Start Menu\Programs\ASUS Utility\ASUS Live Update
Start Menu\Programs\ASUS Utility
These programs are simply bloatware which can slow down and corrupt your system, please remove these programs completely with Revo Uninstaller Pro - Uninstall Software, Remove Programs easily, Forced Uninstall, Leftovers Uninstaller
My System SpecsSystem Spec
14 Aug 2013   #5
darknightz0117

Windows 7
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Code:
BugCheck F4, {3, fffffa8007ef69e0, fffffa8007ef6cc0, fffff8000317e350}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe
Code:
2: kd> !process fffffa8007ef69e0 3
GetPointerFromAddress: unable to read from fffff800030af000
PROCESS fffffa8007ef69e0
    SessionId: none  Cid: 023c    Peb: 7fffffd9000  ParentCid: 0228
    DirBase: 1e9290000  ObjectTable: fffff8a005108b20  HandleCount: <Data Not Accessible>
    Image: csrss.exe
    VadRoot fffffa8011f00830 Vads 155 Clone 0 Private 1690. Modified 7812. Locked 1032.
    DeviceMap fffff8a000006090
    Token                             fffff8a0051b9060
    ReadMemory error: Cannot get nt!KeMaximumIncrement value.
fffff78000000000: Unable to get shared data
    ElapsedTime                       00:00:00.000
    UserTime                          00:00:00.000
    KernelTime                        00:00:00.000
    QuotaPoolUsage[PagedPool]         483232
    QuotaPoolUsage[NonPagedPool]      28688
    Working Set Sizes (now,min,max)  (4221, 50, 345) (16884KB, 200KB, 1380KB)
    PeakWorkingSetSize                6853
    VirtualSize                       211 Mb
    PeakVirtualSize                   220 Mb
    PageFaultCount                    16965
    MemoryPriority                    BACKGROUND
    BasePriority                      13
    CommitCharge                      2981
Code:
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
Code:
2: kd> k
Child-SP          RetAddr           Call Site
fffff880`02783e38 fffff800`03205d22 nt!KeBugCheckEx
fffff880`02783e40 fffff800`031b208b nt!PspCatchCriticalBreak+0x92
fffff880`02783e80 fffff800`03132144 nt! ?? ::NNGAKEGL::`string'+0x17486
fffff880`02783ed0 fffff800`02e76e93 nt!NtTerminateProcess+0xf4
fffff880`02783f50 fffff800`02e73450 nt!KiSystemServiceCopyEnd+0x13
fffff880`027840e8 fffff800`02ec281f nt!KiServiceLinkage
fffff880`027840f0 fffff800`02e77282 nt! ?? ::FNODOBFM::`string'+0x488e4
fffff880`02784900 fffff800`02e75dfa nt!KiExceptionDispatch+0xc2
fffff880`02784ae0 00000000`76da9c12 nt!KiPageFault+0x23a
00000000`00c41170 00000000`00000000 0x76da9c12
The problem seems to have resulted, due to a page fault which wasn't handled, the working set has already exceeded it's maximum value, I'm wondering the page fault couldn't be handled because there wasn't enough physical memory, and for some reason working set trimming wasn't carried out. However, because Stop 0xF4's are usually related to storage difficulties, then a driver may have referenced and accessed a page which wasn't in physical memory, and therefore had to paged from the disk, but it couldn't due to I/O problems.

--------------------------------------------------------------------------

Reduce the number of programs at startup, to avoid any driver or program conflicts:Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
Remove:

Code:
Start Menu\Programs\ASUS Utility\SmartLogon
Start Menu\Programs\ASUS Utility\ASUS Live Update
Start Menu\Programs\ASUS Utility
These programs are simply bloatware which can slow down and corrupt your system, please remove these programs completely with Revo Uninstaller Pro - Uninstall Software, Remove Programs easily, Forced Uninstall, Leftovers Uninstaller

Wow, those are a lot of tests. Thank you for this advice. I will do this later tonight since I'm at work. I'll post results as soon as possible.
My System SpecsSystem Spec
15 Aug 2013   #6
x BlueRobot

 

Okay thanks
My System SpecsSystem Spec
15 Aug 2013   #7
darknightz0117

Windows 7
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Okay thanks
Hmm the check disk seemed fine. I ran the seagate hard drive tests and nothing was wrong either. There are no firmware updates for my Kingston unfortunately.

I've attached the screenshot of the CrystalDiskInfo. Now that you mention the page fault thing.. I feel like I might have tweaked something in the settings regarding that. I used this SSD optimization guide (Sean's, I believe). Maybe that has something to do with it?
My System SpecsSystem Spec
16 Aug 2013   #8
x BlueRobot

 

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:
information   Information

Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Quote   Quote: Originally Posted by Arc View Post
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
My System SpecsSystem Spec
17 Aug 2013   #9
darknightz0117

Windows 7
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:
information   Information

Run Memtest86+ for least 9-10 passes, and preferably overnight as it can take a while to fully complete.

Test each RAM stick individually, if an error is found then move the same RAM stick into the next DIMM slot and test again, if errors are found for the same RAM stick in every available slot then you have a faulty RAM module. On the other hand, if no errors are found in the next slot or the other slots for the same RAM module, then you have a faulty DIMM slot.

Test each RAM stick and every motherboard DIMM slot available.

Quote   Quote: Originally Posted by Arc View Post
testSlot1Slot2
RAM1ErrorError
RAM2GoodGood
It is a RAM, a bad RAM.

But if you have got a result like that:
testSlot1Slot2
RAM1ErrorGood
RAM2ErrorGood
It is a motherboard issue. The particular slot is bad.
Hmm okay. Let me go burn a memtest disk and get this back to you tmr. Driver verifier is the thing that makes Windows crash like crazy, right?
My System SpecsSystem Spec
18 Aug 2013   #10
x BlueRobot

 

If there's problems with the drivers it will
My System SpecsSystem Spec
Reply

 Laptop wakes up from sleep, then crashes after a few seconds.




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
System insomnia! Wakes up after 50 seconds after going to sleep.
My desktop won't stay asleep. It consistenly wakes back up after approximately 50 seconds. This happens regardless of whether I manually select Sleep from the start menu, or if it goes to sleep on its own. System Specs: Windows 7 64-bit Service Pack 1 (problem also existed prior to...
BSOD Help and Support
Computer wakes up after seconds in sleep
Hello, I'm new here and I have a problem with Windows 7. I cannot use the sleep function! This is is so frustrating.. I used to put my computer to sleep all the time in XP. But when I upgraded to W7 a while ago, my computer just wakes up instantly after going into sleep mode, as if I was...
General Discussion
Goes into Sleep for 45 seconds then wakes up...
All by itself,... It is the most bizarre thing. Either it goes to sleep by the timer setting or I can use the &quot;Start button&quot; then select sleep. It closes up properly and looks all hunky-dori. Then between 30 and 45 seconds later, it wakes up again. I heard it happening enough last night...
Performance & Maintenance
Laptop Non-Responsive When Wakes Up From Sleep
I've had an HP dv5t laptop for about a year and a half (see specs), and so far (knock on wood) it's been pretty much perfect EXCEPT for one problem that has been happening on and off for the last several months. It occurs about once or twice a month for no apparent reason --- and I don't know if...
Hardware & Devices
Laptop Wakes Up Seconds After Going To Sleep
Whenever I try to put my laptop into sleep mode, it wakes back up a few seconds later without me touching anything. Has anyone come across this before? I just reformatted my computer and this didn't happen before the reformat.
General Discussion
Laptop wakes from sleep automatically
Alright, I bought my hp dv4-1300 last spring. When Windows 7 came out I got my free MSDNAA copy from my engineering department, and did a clean install (7 Pro, 64-bit). After install, I went to Hp's website and got all the 64-bit drivers for my laptop (gfx, sound, buttons @ top, etc). All of...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:00.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App