Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs with various Stop Codes

15 Aug 2013   #1
shadoweave

Windows 7 Ultimate x64
 
 
Random BSODs with various Stop Codes

Hi all, I'm new here, and fairly desperate, so I hope you guys help!

After a year or so of fairly stable computing, my PC has started getting random BSODs during use or even while idle. I noticed this started happening after my PC failed to boot one day (but suddenly managed to start up an hour later), and after I removed some hard drives from the system.

I've been getting different Stop Codes as well:
- 0x000000F4
- 0x0000007A - KERNAL_DATA_INPAGE_ERROR (msrpc.sys)
- 0x00000050 - PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys)

But everytime the BSOD happens, it stops at "initializing disk for crash dump", so I don't have any minidumps to share I think.

I've ran chkdsks and the Windows Memory Diagnostic says my RAM sticks are fine. HD Sentinel says my hard disks are in Perfect condition as well. My PC BSODed during a virus scan, but I don't think that should be the issue. I'm currently testing RAM sticks by removing one, and leaving it idle. I've also attached the information from the SF Diagnostic tool.

Let me know if there's any information I can give to help the diagnostic along! Thanks so much!

EDIT: I noticed EventSys.txt has the message "An error was detected on device \Device\Harddisk7\DR10 during a paging operation." But I've only 3 harddrives (SSD + 2 data drives) at the moment. So how do I determine which is Harddisk7?


My System SpecsSystem Spec
.

15 Aug 2013   #2
VistaKing

Windows 7 Ultimate 32-Bit & Windows 7 Ultimate 64-Bit
 
 

F4 BSOD is usually hard drive .

Update your SSD firmware .

http://www.crucial.com/firmware/m4/0...ate_Signed.zip

SSD Support
My System SpecsSystem Spec
15 Aug 2013   #3
shadoweave

Windows 7 Ultimate x64
 
 

I'll try that later today.

But why would the problem occur all of a sudden when it's been working fine for so long?
Especially since the latest firmware isn't recent either.
My System SpecsSystem Spec
.


Reply

 Random BSODs with various Stop Codes




Thread Tools





Similar help and support threads
Thread Forum
Random BSODs Multiple Stop Codes
Hi there, I've had this PC for several years now, and its always been quirky but manageable. Just recently though I've been having increased BSODs and I've tried everything I can think of to mitigate the issues. When I first started installing Windows 7 on the machine when I got it I had a...
BSOD Help and Support
Random Bsods , stop codes 0x50 3B
My system is almost 2 years old and been working fine , now for past 2 weeks i'm getting random bsods . i didnt add any new hardware nor installed any suspicious softwares , also i mainly use my pc for gaming and video editing .so , i decided to clean my cpu , reinserted ram , checked cables and...
BSOD Help and Support
BSODs - various STOP codes
Been researching forum with the mounds of helpful info. However, we keep getting BSODs with various stop codes. Need help with figuring out root cause. At one point it was so bad, the PC would not boot and we refreshed from factory image which helped for awhile. A couple months later getting...
BSOD Help and Support
Daily BSODs (Multiple Stop Codes)
Hi there. My PC is custom-made and it has a history of crashing. Lately, these crashes have been happening multiple times a day, so I've decided to stop ignoring them. The Stop message that I'm used to seeing in the past is "irql_not_less_or_equal". Now the messages include...
BSOD Help and Support
Random BSODs Caused by Random Files with Differing Stop Codes
Since 16 Feb 2013 to today 22 Feb 2013 I've been getting Blue Screens; these appear to be completely random each time with different stop codes and (according to Blue Screen Veiw) are caused by different files. For example; Caused by ntkrnlpa.exe or atikmdag.exe, or ks,sys, or USBPORT.SYS, or...
BSOD Help and Support
Consistent BSODs, Inconsistent STOP codes, and more
So, I've had a chronic problem with this desktop computer that a friend of mine helped me build. It's a Giga-Byte GA-EP43-UD3L motherboard . I've seen BSODs (and recently a Green one...) and all sorts of stuff, so I left it laying around for me to deal with later. Now, it's later, and I've...
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:35.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App