BSOD - Several BSOD errors - Frequently

Hello kshatriyan.

Your crash dumps are not showing any finite probable cause.

Scan the system for possible virus infection with the following programs.

• Anti-rootkit utility TDSSKiller
• Windows Defender Offline

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If both of the virus scan and memtset comes free of errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

   Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

   Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

   Tip

• If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
• If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Also let us know which antivirus do you use.
______________________________________________________________________________
BSOD ANALYSIS:

Code:

BugCheck 1, {76f4137a, 0, ffff0000, fffff88003716ca0}

Probably caused by : ntkrnlmp.exe ( nt!KiSystemServiceExit+245 )

Followup: MachineOwner
----------------------------------------------------------------------------------
BugCheck 3B, {c0000005, ff, fffff88002d06060, 0}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::NNGAKEGL::`string'+2abea )

Followup: MachineOwner
---------------------------------------------------------------------------------
BugCheck 1E, {0, 0, 0, 0}

Probably caused by : ntkrnlmp.exe ( nt!PoIdle+52a )

Followup: MachineOwner
------------------------------------------------------------------------------------
BugCheck 1000007E, {ffffffffc0000005, fffff88004f1b254, fffff8800339a478, fffff88003399cd0}

Probably caused by : hardware ( usbhub!UsbhIncPdoIoCount+7c )

Followup: MachineOwner
---------

Memtest will run on itself, without booting to the laptop; so it will not be the problem. Same for Windows Defender offline.

TDSSKiller will take a few seconds only.

kshatriyan, Arc is offline right now.
Eight passes with no errors is enough, you may exit out of the test.

kshatriyan said:

Hello Arc


TDSSKILLER test was successful

Successful as in? Did it find anything or not?
Have you tried Windows Defender Offline?

YoYo155 said:

Eight passes with no errors is enough, you may exit out of the test.

Ditto. Apparently 8 passes is enough .... go for the other tests like Driver Verifier.