Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD running prime95 "Blend" torture test, error 0x00000124 (Win7 x64)

17 Aug 2013   #11
Sniperm4n

Windows 7 Ultimate x64
 
 

Quick FYI that Speccy is still bouncing around between 48-57 (I haven't seen it go above 57).


My System SpecsSystem Spec
.
17 Aug 2013   #12
YoYo155

Windows 10
 
 

Could you post a picture of AIDA and CPU-Z?
My System SpecsSystem Spec
17 Aug 2013   #13
Sniperm4n

Windows 7 Ultimate x64
 
 

Certainly, is there some sort of summary screen you'd like screenshoted, or do you want a pict of AIDA in the process of stress testing, along with CPU-Z open?
My System SpecsSystem Spec
.

17 Aug 2013   #14
YoYo155

Windows 10
 
 

Yes the statistics tab along side CPU-Z.
My System SpecsSystem Spec
17 Aug 2013   #15
Sniperm4n

Windows 7 Ultimate x64
 
 
AIDA64 at Load

Excellent, thanks, screenshot attached! As a side note, I got bored and decided to install Firefox, FileZilla, and Foobar while I was doing other stuff ;-). I also decided to leave Speccy open, and Task Manager's Performance tab open for the purposes of this screenshot.
My System SpecsSystem Spec
17 Aug 2013   #16
YoYo155

Windows 10
 
 

A couple of things I can see.

3.3v = Low
12v = High
CPU not hitting boost clock of 3.90 .

Stop the test and post another screenshot.
My System SpecsSystem Spec
17 Aug 2013   #17
Sniperm4n

Windows 7 Ultimate x64
 
 
AIDA64 Test Stopped

Test stopped, screenshot attached.

Thanks,
-Snipe
My System SpecsSystem Spec
17 Aug 2013   #18
YoYo155

Windows 10
 
 

What is the make and model of your PSU?
My System SpecsSystem Spec
17 Aug 2013   #19
Sniperm4n

Windows 7 Ultimate x64
 
 

I had a feeling that would probably be your next question :-P. Here's some quick back story:

Due to the fact I didn't want to bring my primary Q6600 down during the build process, I decided to rip the PSU out of my "dead" HTPC (it has OS issues/a motherboard issue). Here's the make/model:

Make: Rosewill
Model: RG630-2 (Green Series)

The PSU I'll be putting into the final build is:
Make: Antec
Model: Neo HE650
My System SpecsSystem Spec
17 Aug 2013   #20
YoYo155

Windows 10
 
 

That could be your culprit right there.

Also note that Haswell CPUs are more sensitive to PSU performance !!
My System SpecsSystem Spec
Reply

 BSOD running prime95 "Blend" torture test, error 0x00000124 (Win7 x64)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Win7 - Windows Update Error "Service is not running"
Hello, can someone here please kindly help me with my problems re Windows Update --- I have tried to run Windows Update on my computer and received the following error message: I have tried the Windows Update Troubleshooter for Windows 7 from "Windows Update Cannot Check For Updates"...
Windows Updates & Activation
WEI can't get past running test "Direct3D 10 Batch Assessment"
Hello. Hope everybody is doing fine. So, after installing another 4GB stick of RAM and my trusted SSD, it was time for a refresh on the WEI. But before I get to that, let me take you back a few days ago, when I got myself a new laptop (:party:), a Lenovo Z710 (i3-4000M, GT 745M, 4GB DDR3L...
Performance & Maintenance
"Quick test on drive 1 did not complete" error on my WD Black Caviar
Hello! I was running WD diagnostic tool on my Black Caviar 2TB and after just a few seconds of Quick Test I got this message "Quick test on drive 1 did not complete!" in window pop-out. Here is the full message: ...
Hardware & Devices
Sound Won't Work "Error failed to play test tone"
Hi. I have had some problems recently with my PC, and the latest is that my sound doesn't work. I have Realtek HD Audio. I can still see my speakers under the Sound list in Control Panel, and they say they work. All of my drivers are up to date and say they work. I have tried many things,...
Sound & Audio
BSOD Torture Testing w/ Prime95 v227
I was stressing my laptop using Prime95 v227 then it just automatically restarted. I also attach my result. Would anyone please take a look at it and explain it to me? What should I do next to pass this test? Thank you so much :rolleyes:
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App