Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after waking from sleep

18 Aug 2013   #1
a135rt6

windows 7 home premium 64bit
 
 
BSOD after waking from sleep

Hi.

i seem to keep getting bsod after waking the computer from sleep

i just installed fresh windows seven with driver genius 12 driver update so i'm not sure why Im getting problems

this problem also occured in vista, but more randomly

followed the windows 7 diagnostic tool grab all dump

the laptops a standard HP dv6 1215sa 4gb ram 300gb hard drive 2.2ghz turion dual core

thanks


My System SpecsSystem Spec
.
18 Aug 2013   #2
YoYo155

Windows 10
 
 

a135rt6, welcome to SF .

Both bugchecks indicate an issue with the storage:
Code:
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa8006e3db30, Terminating object
Arg3: fffffa8006e3de10, Process image file name
Arg4: fffff800031d30d0, Explanatory message (ascii)
Code:
EXCEPTION_CODE: (NTSTATUS) 0xc0000006 - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
Code:
FAILURE_BUCKET_ID:  X64_0xF4_IOERR_IMAGE_wininit.exe

BUCKET_ID:  X64_0xF4_IOERR_IMAGE_wininit.exe
-====================================================-


Code:
KERNEL_DATA_INPAGE_ERROR (7a)
The requested page of kernel data could not be read in.  Typically caused by
a bad block in the paging file or disk controller error. Also see
KERNEL_STACK_INPAGE_ERROR.
If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
it means the disk subsystem has experienced a failure.
If the error status is 0xC000009A, then it means the request failed because
a filesystem failed to make forward progress.
Arguments:
Arg1: 0000000000000020, lock type that was held (value 1,2,3, or PTE address)
Arg2: ffffffffc000009d, error status (normally i/o status code)
Arg3: fffffa80050307c8, current process (virtual address for lock type 3, or PTE)
Arg4: 0000000000000000, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address)
Code:
ERROR_CODE: (NTSTATUS) 0xc000009d - STATUS_DEVICE_NOT_CONNECTED

DISK_HARDWARE_ERROR: There was error with disk hardware
  • 0xC000009D, or STATUS_DEVICE_NOT_CONNECTED, indicates defective or loose cabling, termination, or that the controller does not see the hard disk.


-------------------


Code:
  Log Name: System
  Source: cdrom
  Date: 2013-08-18T17:17:34.837
  Event ID: 7
  Task: N/A
  Level: Error
  Opcode: N/A
  Keyword: Classic
  User: N/A
  User Name: N/A
  Computer: user-PC
  Description: 
The device, \Device\CdRom0, has a bad block.
This was logged numerous times in the Event Viewe and indicates a failing CD-ROM drive / controller.

-====================================================-



Testing the HDD:
  1. Perform a Disk Check | Disk Check
  2. Then Post the results following | THIS METHOD
  3. Download SeaTools for Windows if you don't want to use a CD to test the HDD you can use YUMI Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of the page).




Post back with the results!

My System SpecsSystem Spec
21 Aug 2013   #3
a135rt6

windows 7 home premium 64bit
 
 

Hi thanks for your quick reply

ive done both disk check and seatools (quick check)

ive included the disc check in the attachment and another SF diagnostic log

i dont know where the seatools log is but it didnt tell me about any problems. do you think i should run a long test or can you tell me where the log is?

how do i test the cd rom drive it has never cause me any problems

thanks again
My System SpecsSystem Spec
.

21 Aug 2013   #4
YoYo155

Windows 10
 
 

Your PC appears to be overheating often!
Code:
  Log Name: System
  Source: Microsoft-Windows-Kernel-Power
  Date: 2013-08-19T20:39:36.718
  Event ID: 88
  Task: N/A
  Level: Error
  Opcode: Info
  Keyword: N/A
  User: N/A
  User Name: N/A
  Computer: user-PC
  Description: 
The system was hibernated due to a critical thermal event.
Hibernate Time = ?2013?-?08?-?19T19:39:36.718808600Z             
ACPI Thermal Zone = ACPI\ThermalZone\THRM             
_HOT = 373K
Download Speccy and Post a Screenshot of the summary window under two conditions.
  1. Normal use for 30 minutes.
  2. Strees Tessting With Prime95, Keep a close eye in the temperatures don't let it exceed 80! If it does STOP the test and shutdown the PC in a safe manner using the Shut Down option in the start menu.
My System SpecsSystem Spec
21 Aug 2013   #5
a135rt6

windows 7 home premium 64bit
 
 

lol its overheated since the day it was bought brand new check the temps without the stress test!! its never been able to go on high performance mode because it shuts down constantly its always on power saver. and i'm only browsing the internet no videos or anything. cant use hdmi output cause it overheats. its been cleaned inside and had the fan replaced

cheers mate!
My System SpecsSystem Spec
21 Aug 2013   #6
YoYo155

Windows 10
 
 

Well that must be it, if not than a big part of the issue.

How old is the laptop? thermal pads, like anything, degrade over time.
Most BIOSs these days have an option to set a fan profile, i.e. Silent / Normal.
Check and see if yours offers this option.

you can also purchase a cooling-mat for it and see if it helps, making sure that the air vents
doesn't look like this picture I took today would go a long way.

Attachment 282560
My System SpecsSystem Spec
25 Aug 2013   #7
YoYo155

Windows 10
 
 

Any developments?
My System SpecsSystem Spec
Reply

 BSOD after waking from sleep




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD After Waking From Sleep
Hi, I have been having several crashes when waking from sleep. I got the latest drivers for all my kit when I did a fresh install last week and the firmware on the SSDs is the latest available. The problem occurs when I move my mouse to wake the PC, it thinks about it then crashes and...
BSOD Help and Support
BSOD from waking up from sleep
This morning when I tried to wake up my computer, nothing would display on the computer screen. I had to turn it off and then turn it back on. As it tried to resume windows, I got the BSOD. When I restarted my computer, I got the following message: Problem signature: Problem Event Name: ...
BSOD Help and Support
BSOD After waking up from sleep
I keep getting a blue screen every time my computer wakes up from hibernate or sleep. I just recently installed an SSD, so there might be an issue there. I have disabled hybrid sleep mode, but that didn't change anything. There is newer firmware for the SSD than what I have, but I don't want to...
BSOD Help and Support
BSOD When Waking PC from Sleep
Hi Everone, im not really new hear since I have been to this forum before but this is my first time actually registering. I seem to be having this problem with windows 7 when waking the PC from sleep. It will work fine for a few hours and then bam I get hit with a BSOD giving me this error: ...
BSOD Help and Support
BSOD after waking from sleep
Hello all~ I've been reading all the posts about BSOD after sleep trying to understand the problem, since my computer does the same thing. I've updated all the drivers I can think of but the problem is still there. I was wondering if you guys could help me out! I've included the zip file...
BSOD Help and Support
Bsod after waking from sleep.
Running amd phenom 955x4, ga-880gm usb3 motherboard, kingston hyperx blu 4g 1600 ddr3, Caviar green 1.5tb drive and GV-R545SC-1GI graphics card. Built this system about 4 weeks ago, has been pretty unstable, bsods when waking from sleep but not all the time. Thought it was the printer driver but...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:45.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App