New
#1
BSOD errors after failed CCC update
Hello!
I don't remember what happened to cause this, but I wasn't able to have Windows full screen, there were black borders. I also couldn't select 1920 x 1080 in Catalyst Control Center under Desktop Area - Basic anymore. So i decided to update the CCC. During the update my PC crashed. Then I could only start it in safe mode and only after i cleared CMOS, otherwise I was getting stop codes, usually different every time. After a few headaches i managed to reinstall the CCC (after using Driver Sweeper) and my PC seemed to be repaired. Still, i couldn't use the 1920 x 1080 under Basic, but i could choose 1080p under HDTV and then use scaling to have the picture full screen. Yesterday, during a poker session, for which i use 2 monitors and a bunch of poker software (Holdem Manager 2, Table Ninja, Tournament Shark), my PC crashed again, with the error code D1. Minidump wasn't created for some reason.
I had error codes three times (about a month apart) before the CCC driver update. Twice the F4 and once the 101.
After the failed CCC driver installation i had these codes in order: D1 (jraid.sys), 7E, 3B, 3B (atikmdag.sys), FC, 50, 7E (Rt64win7.sys), 1E (Rt64win7.sys), 7E, 1E (USBPORT.sys), 50 (ks.sys), D1 (jraid.sys).
The only thing i did since yesterday's crash was doing the ATI Radeon HD 5700's driver rollback in device manager, from version 9.12.0.0 (12/19/2012) to 9.2.0.0 (9/27/2012) and disabled the "faulty" USB. I was getting the "USB Device not recognized" message after startup. This message started appearing after the failed graphics driver update.
Thank You for helping.