Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD errors after failed CCC update

19 Aug 2013   #1
MassaTheChamp

Windows 7 Ultimate x64
 
 
BSOD errors after failed CCC update

Hello!

I don't remember what happened to cause this, but I wasn't able to have Windows full screen, there were black borders. I also couldn't select 1920 x 1080 in Catalyst Control Center under Desktop Area - Basic anymore. So i decided to update the CCC. During the update my PC crashed. Then I could only start it in safe mode and only after i cleared CMOS, otherwise I was getting stop codes, usually different every time. After a few headaches i managed to reinstall the CCC (after using Driver Sweeper) and my PC seemed to be repaired. Still, i couldn't use the 1920 x 1080 under Basic, but i could choose 1080p under HDTV and then use scaling to have the picture full screen. Yesterday, during a poker session, for which i use 2 monitors and a bunch of poker software (Holdem Manager 2, Table Ninja, Tournament Shark), my PC crashed again, with the error code D1. Minidump wasn't created for some reason.

I had error codes three times (about a month apart) before the CCC driver update. Twice the F4 and once the 101.

After the failed CCC driver installation i had these codes in order: D1 (jraid.sys), 7E, 3B, 3B (atikmdag.sys), FC, 50, 7E (Rt64win7.sys), 1E (Rt64win7.sys), 7E, 1E (USBPORT.sys), 50 (ks.sys), D1 (jraid.sys).

The only thing i did since yesterday's crash was doing the ATI Radeon HD 5700's driver rollback in device manager, from version 9.12.0.0 (12/19/2012) to 9.2.0.0 (9/27/2012) and disabled the "faulty" USB. I was getting the "USB Device not recognized" message after startup. This message started appearing after the failed graphics driver update.

Thank You for helping.


My System SpecsSystem Spec
.
19 Aug 2013   #2
x BlueRobot

 

Code:
0: kd> lmvm jraid
start             end                 module name
fffff880`010c7000 fffff880`010e7000   jraid    T (no symbols)           
    Loaded symbol image file: jraid.sys
    Image path: \SystemRoot\system32\DRIVERS\jraid.sys
    Image name: jraid.sys
    Timestamp:        Thu Oct 29 08:14:20 2009 (4AE94EDC)
    CheckSum:         000282C3
    ImageSize:        00020000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your JMicron RAID Driver seems to causing problems and is very outdated, please update the driver from here - Driver

Code:
0: kd> lmvm Rt64win7
start             end                 module name
fffff880`07833000 fffff880`078d3000   Rt64win7 T (no symbols)           
    Loaded symbol image file: Rt64win7.sys
    Image path: \SystemRoot\system32\DRIVERS\
    Image name: Rt64win7.sys
    Timestamp:        Tue Sep 27 15:50:33 2011 (4E81E2B9)
    CheckSum:         0009FB77
    ImageSize:        000A0000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Your Realtek RTL8168D/8111D Family PCI-E Gigabit Ethernet NIC driver seems to be causing problems, please update the driver from here - Realtek

Code:
6: kd> lmvm atikmdag
start             end                 module name
fffff880`0780a000 fffff880`0837d000   atikmdag T (no symbols)           
    Loaded symbol image file: atikmdag.sys
    Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
    Image name: atikmdag.sys
    Timestamp:        Fri Mar 29 02:27:04 2013 (5154FBF8)
    CheckSum:         00B25604
    ImageSize:        00B73000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update the graphics card driver to the latest WHQL version without CCC, updates available from here - AMD Graphics Drivers & Software

Quote:
WHQL
Release Date: April 24th 2013
Version: 13.4
In Device Manager: 12.104
Remove:

Code:
Start Menu\Programs\DAEMON Tools Lite
Quote   Quote: Originally Posted by Arc View Post
Download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
  • Double click to open it.
  • Click this button only:
  • If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Daemon Tools uses a driver called sptd.sys, which is known to cause BSODs with Windows 7. It is recommend you remove this program, and use Windows own in-built features or ImgBurn.

Reduce the number of programs at startup, to avoid any driver or program conflicts:Keep your AV program enabled at boot.
My System SpecsSystem Spec
19 Aug 2013   #3
MassaTheChamp

Windows 7 Ultimate x64
 
 

Hey!

Thanks for helping. I removed Deamon Tools and installed the Realtek driver. But i don't know which Jmicron RAID Driver should i install. All the latest drivers in 1394, CardReader, Ethernet, Sata_Controller folders? Both the Filter and WinDrv in 1394 folder?
I also don't see the option to download and install just the WHQL driver without the CCC. What should i do?
My System SpecsSystem Spec
.

20 Aug 2013   #4
x BlueRobot

 

Use the Custom Installation option - Can you install drivers without installing CCC?

Are you running a RAID configuration? Post a screenshot of your Disk Management snap in window - Disk Management - Post a Screen Capture Image
My System SpecsSystem Spec
20 Aug 2013   #5
MassaTheChamp

Windows 7 Ultimate x64
 
 

Hey!

I installed the latest video driver without the CCC. Although i had an error, everything installed successfully, except "install package".

I'm pretty sure I don't have the Raid configuration. Should i leave the JMicron RAID Driver alone?
My System SpecsSystem Spec
21 Aug 2013   #6
x BlueRobot

 

You can simply remove that driver from your system since your not using RAID. I would recommend using this tutorial to help you - Drivers - Clean Left over Files after Uninstalling
My System SpecsSystem Spec
31 Aug 2013   #7
MassaTheChamp

Windows 7 Ultimate x64
 
 

Hi!

I'm really sorry for a late response, i had some personal problems and had to move to a different location.
Yesterday I had another BSOD while purging hand histories within HM, basically deleting oldest ones, which is a 2 day process since my database is so big. Being stupid, i changed windows theme from aero to windows 7 basic while the program was working in the background, which probably caused the crash. The error was jraid.sys which i hadn't removed yet. Should i remove all of the files from JMicron or just the jraid.sys?

Thank You for your help!
My System SpecsSystem Spec
01 Sep 2013   #8
x BlueRobot

 

Remove all the entries for that driver
My System SpecsSystem Spec
03 Sep 2013   #9
MassaTheChamp

Windows 7 Ultimate x64
 
 

OK, done Thanks, I hope the problem is solved.
My System SpecsSystem Spec
03 Sep 2013   #10
x BlueRobot

 

Thanks for removing the driver, please leave this thread open for a few more days and then report back if you have any more BSODs or problems
My System SpecsSystem Spec
Reply

 BSOD errors after failed CCC update




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Failed Windows Update Errors 800B0100 and 8024200D
Hi Folks, Stumbled across this forum hoping to find an answer to my problem, Fresh install of Win 7 Home Premium 64 Bit, Windows Update downloaded and installed approx 120 updates but is constantly failing on two, these being KB2912390 and KB2978092, both fail with the errors 800B0100 and 8024200D....
Windows Updates & Activation
Failed Windows 7 update encountered 2 unknown errors
I have tried everything I can think of and everything people have said on forums and I cannot seem to get this working no matter what I do. When I try to do my windows update it says 2 updates failed and windows updated encountered an unknown error. Code 800B0100 and Code 80073712. When I click...
Windows Updates & Activation
Windows 7 SP1 update failed, causing Windows Update errors
Hi, Running IE 9 and tried to update to IE 11. Said I needed to update my Windows 7, 64 to SP1. found the update and attempted to install. Install failed and message said "restart your computer and try again" tried again and it failed again. Now Windows Update cannot update the PC, error message...
Windows Updates & Activation
Multiple BSOD Errors when gaming/youtubing and failed startups
Hi all, first time SevenForumer, but looks like a good place to get some expert advice! I'm having issues with my custom build. This is a long, historic problem with this build. I get BSODs (multiple types, minidumps attached) generally when gaming or watching youtube. Right after this...
BSOD Help and Support
Random BSOD errors with failed minidumps
Hi I have been getting random bsod errors and even the minidumps are not being created errors are not the same each time sometimes it is IRQL_not_less_or_equal and sometimes it is kernel_data_in_page error please help me in finding the root cause of the problem System Alienware m14x...
BSOD Help and Support
Failed update: BSOD
Hello, Earlier today my computer automatically updated itself and got as far as 36%, but then it got stuck for several minutes before crashing with a BSOD. I forced my computer to restart twice but it kept crashing with a BSOD, with different errors showing up each time. Luckily I managed to...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App