Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple BSOD Errors when gaming/youtubing and failed startups

20 Aug 2013   #1
JamesNasium

Windows 7 Ultimate x64
 
 
Multiple BSOD Errors when gaming/youtubing and failed startups

Hi all, first time SevenForumer, but looks like a good place to get some expert advice!

I'm having issues with my custom build. This is a long, historic problem with this build. I get BSODs (multiple types, minidumps attached) generally when gaming or watching youtube. Right after this happens, when I reboot, I will have trouble getting my computer to startup successfully. It will either fail to post, or windows will freeze again when it is starting up (but no BSOD here I believe, just a freeze).

This type of problem has been happening with this computer for about a year on and off. When it originally started happening, I had run memtest and saw errors so I actually ended up buying new RAM (the ones I have installed now). I have re-run memtest with this RAM and it too got memtest errors. At that point I figured it might be the mobo slot so I took out one of the sticks and ran memtest with with the single DIMM in different slots until I didn't get errors. That's the way I have it now. Everything was peachy until about a month ago when these problems started popping up again. So now I am just confused and uncertain about whats happening with my computer! Should I get a new mobo? That will be a headache, so hoping there might be another solution.

I'm attaching all my minidumps. They include some from back in March but i guess I would like to focus on the ones since late July to now. The most recent one, from Aug. 20th I believe I had driver verifier running FYI.

Appreciate any help with this!

Thanks


My System SpecsSystem Spec
.
21 Aug 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Update or remove the drivers listed below:

UltraMonUtility.sys Fri Nov 14 07:10:30 2008
UltraMon multi-monitor
Driver Reference Table - UltraMonUtility.sys

AsIO.sys Mon Apr 6 13:21:08 2009
Asus PCProbe Utility
Driver Reference Table - AsIO.sys

ASACPI.sys Thu May 14 07:25:17 2009
Asus ATK0110 ACPI Utility (a known BSOD maker in Win7 and Win8). Also a part of many Asus utilities (Win8 versions available from Windows Update as an Optional Update - but check Asus first!)
Driver Reference Table - ASACPI.sys

AODDriver2.sys Thu Apr 5 15:23:37 2012
AMD Overdrive; also in EasyTune6 for Gigabyte motherboard [br] Known BSOD issues in Win7
Driver Reference Table - AODDriver2.sys

(AODDriver2.sys) is either a stand-alone application, or a component of the AMD VISION Engine Control Center. This driver is known to cause BSOD's on some Win7 systems. Please uninstall all AMD/ATI video stuff from Control Panel...Programs...Uninstall a program. Then, download (but DO NOT install) a fresh copy of the ATI drivers from Global Provider of Innovative Graphics, Processors and Media Solutions | AMD (in the upper right corner of the page) Use this procedure to install the DRIVER ONLY: ATI video cards - DRIVER ONLY installation procedure

A "stop 0x124" is fundamentally different to many other types of bluescreens because it stems from a hardware complaint. Stop 0x124 minidumps contain very little practical information, and it is therefore necessary to approach the problem as a case of hardware in an unknown state of distress. You can read more on this error and what to try here... Stop 0x124 - what it means and what to try: Stop 124 - What it means and what to try

Upload a screenshot using:
CrystalDiskInfo
For how to upload a screenshot or file, read here

Test your Hard Drive by running:
Hard Drive Diagnostic Procedure
Test and Diagnose RAM Issues with Memtest86+:
RAM - Test with Memtest86+
Tip   Tip
  • Pay close attention to part 3 of the tutorial "If you have errors"
  • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.


Test your Hardware for Stability and Heat Problems with Prime95:
Stress Test With Prime95
How to Stress Test a Video Card with Furmark:
Video Card - Stress Test with Furmark
Test your CPU Stability with IntelBurnTest:
CPU - Stress Test Using IntelBurnTest
Monitor hardware temperature with system monitoring software like Speccy or HWMonitor:
Piriform - Speccy

CPUID - HWMonitor
Dumps...
Code:
Debug session time: Wed Aug 21 04:49:25.471 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:09.157
Probably caused by : AuthenticAMD
BugCheck 124, {0, fffff980056c08f8, 0, 0}
BugCheck Info: WHEA_UNCORRECTABLE_ERROR (124)
Bugcheck code 00000124
Arguments: 
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffff980056c08f8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.
BUGCHECK_STR:  0x124_AuthenticAMD
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sun Aug 18 10:54:04.042 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 21:32:50.783
Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+c4 )
BugCheck 1000007E, {ffffffffc0000005, fffff88005399ec8, fffff88003ccd6a8, fffff88003cccf00}
BugCheck Info: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
Bugcheck code 1000007E
Arguments: 
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88005399ec8, The address that the exception occurred at
Arg3: fffff88003ccd6a8, Exception Record Address
Arg4: fffff88003cccf00, Context Record Address
PROCESS_NAME:  System
BUGCHECK_STR:  0x7E
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
FAILURE_BUCKET_ID:  X64_0x7E_dxgmms1!VIDMM_GLOBAL::ReferenceAllocationForPreparation+c4
BiosVersion = 2102   
BiosReleaseDate = 06/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Wed Aug  7 06:08:42.622 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 1:32:46.292
*** ERROR: Module load completed but symbols could not be loaded for usbohci.sys
Probably caused by : usbohci.sys ( usbohci+2a45 )
BugCheck FE, {5, fffffa8004ca11a0, 10024397, fffffa8004b66258}
BugCheck Info: BUGCODE_USB_DRIVER (fe)
Bugcheck code 000000fE
Arguments: 
Arg1: 0000000000000005, USBBUGCODE_INVALID_PHYSICAL_ADDRESS The host controller is
	using a physical memory address that was not allocated by
	the USBport driver.
Arg2: fffffa8004ca11a0, Device extension pointer of the host controller
Arg3: 0000000010024397, PCI Vendor,Product id for the controller
Arg4: fffffa8004b66258, Pointer to Endpoint data structure
BUGCHECK_STR:  0xFE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xFE_INVALID_PHYSICAL_ADDR_usbohci+2a45
BiosVersion = 2102   
BiosReleaseDate = 06/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sun Aug  4 03:42:20.305 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 3:48:20.585
*** WARNING: Unable to verify timestamp for Unknown_Module_00000000`00000000
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+52a )
BugCheck FE, {5, fffffa8004c901a0, 10024397, fffffa80039f8968}
BugCheck Info: BUGCODE_USB_DRIVER (fe)
Bugcheck code 000000fE
Arguments: 
Arg1: 0000000000000005, USBBUGCODE_INVALID_PHYSICAL_ADDRESS The host controller is
	using a physical memory address that was not allocated by
	the USBport driver.
Arg2: fffffa8004c901a0, Device extension pointer of the host controller
Arg3: 0000000010024397, PCI Vendor,Product id for the controller
Arg4: fffffa80039f8968, Pointer to Endpoint data structure
BUGCHECK_STR:  0xFE
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xFE_INVALID_PHYSICAL_ADDR_nt!PoIdle+52a
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sat Aug  3 23:53:40.747 2013 (UTC + 6:00)
*** WARNING: Unable to verify timestamp for fvevol.s
*** ERROR: Module load completed but symbols could not be loaded for fvevol.s
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:00:13.027
*** WARNING: Unable to verify timestamp for fvevol.s
*** ERROR: Module load completed but symbols could not be loaded for fvevol.s
Probably caused by : memory_corruption
BugCheck 4E, {7, 83e7e, 83f7e, 0}
BugCheck Info: PFN_LIST_CORRUPT (4e)
Bugcheck code 0000004E
Arguments: 
Arg1: 0000000000000007, A driver has unlocked a page more times than it locked it
Arg2: 0000000000083e7e, page frame number
Arg3: 0000000000083f7e, current share count
Arg4: 0000000000000000, 0
BUGCHECK_STR:  0x4E_7
FAILURE_BUCKET_ID:  X64_MEMORY_CORRUPTION_ONE_BIT
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Sat Aug  3 23:40:15.523 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 1:53:39.193
Probably caused by : ntkrnlmp.exe ( nt!PoIdle+52a )
BugCheck FC, {fffff88004808c70, 80000001274ea121, fffff88003cc5ec0, 0}
BugCheck Info: ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (fc)
Bugcheck code 000000fC
Arguments: 
Arg1: fffff88004808c70, Virtual address for the attempted execute.
Arg2: 80000001274ea121, PTE contents.
Arg3: fffff88003cc5ec0, (reserved)
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0xFC
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  System
FAILURE_BUCKET_ID:  X64_0xFC_nt!PoIdle+52a
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Debug session time: Fri Aug  2 05:38:54.093 2013 (UTC + 6:00)
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
System Uptime: 0 days 0:27:53.763
Probably caused by : ntkrnlmp.exe ( nt!ExQueryPoolUsage+e0 )
BugCheck 50, {ffffffffffffffe3, 0, fffff80002c6544b, 0}
BugCheck Info: PAGE_FAULT_IN_NONPAGED_AREA (50)
Bugcheck code 00000050
Arguments: 
Arg1: ffffffffffffffe3, memory referenced.
Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
Arg3: fffff80002c6544b, If non-zero, the instruction address which referenced the bad memory
	address.
Arg4: 0000000000000000, (reserved)
BUGCHECK_STR:  0x50
DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
PROCESS_NAME:  taskhost.exe
FAILURE_BUCKET_ID:  X64_0x50_nt!ExQueryPoolUsage+e0
BiosVersion = 2102   
BiosReleaseDate = 06/17/2010
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
22 Aug 2013   #3
JamesNasium

Windows 7 Ultimate x64
 
 

Thanks for taking the time to look into this and for your reply, koolkat77.

I'm going to get started on going through this list of things to do you presented here. Couple questions first:

The UltraMonUtility driver is fully up to date, does this mean I need to remove it? Ultramon is a really handy piece of software and I'd like to keep it if possible.

What is the best way to remove these other drivers (AsIO.sys, ASACPI.sys)? From device manager?

Thanks
My System SpecsSystem Spec
.

22 Aug 2013   #4
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Try uninstalling from Add/Remove Programs from control panel.
You can also try removing them using Revo Uninstaller free.

information   Information
  • Download and install Revo Uninstaller free from here:
    Download Revo Uninstaller Freeware
    Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).

Let us know when you have completed the rest of the steps.
My System SpecsSystem Spec
24 Aug 2013   #5
JamesNasium

Windows 7 Ultimate x64
 
 

Posting an update on progress:

- Removed UltraMonUtility.sys driver
- Removed ATK0110 ACPI Utility Driver (ASACPI.sys)
- I had the latest version (5/5/2009 1043.6.0.0), no new updates found, so I uninstalled it
- AsIO.sys driver seemed to be removed after I uninstalled ASACPI.sys
- AODriver2.sys has been removed via the removal of Catalyst Control Center
- reinstalled just the video card driver
- this had the side-effect of removing my Northbridge driver; i followed this guy's steps to install just that driver without installing catalyst again: AMD PCI Express (3GIO) Filter and PCI Bus Driver requires manually updating. - Guru3D.com Forums
- Installed CrystalMark, screens to follow:
Attachment 283069

Attachment 283070

Attachment 283071

- Ran full diagnostic utility on Intel X25M SSD using Intel SSD Toolbox program: Results were OK.


After that I skipped to doing some memtest cause that's where my suspicion was. I got through 7 passes in my current configuration (DIMM "A" in slot 4 of mobo) with no errors. Then I tried to put DIMM "B" in slot 3 and run with both sticks in. My computer would not even POST with this configuration after many attempts. I took out DIMM "A" and just tried to run with that configuration (DIMM "B" in slot 3). No POST here either. Put DIMM "B" in slot 4 and the computer booted OK. So right now I'm seeing that my mobo won't POST with a DIMM in slot 3. Not sure what's up there. Can anyone verify if my memory is compatible with this motherboard? CMZ8GX3M2A1600C9B memory, M4A79XTD EVO motherboard.
My System SpecsSystem Spec
25 Aug 2013   #6
essenbe

Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint
 
 

The QVL for your board can be found here M4A79XTD EVO - Motherboards - ASUS
If your ram is not on the list it does not mean it is not compatible. You can also check corsair's web site. Some ram manufacturers have a list of boards they have tried it out on.

I know it is time consuming, but you need to run memtest with 1 stick in each slot, 1 at a time. Do the same for the other stick. What you are doing is checking the ram as well as checking the dimm slots on the motherboard. If both sticks, 1 at a time, can pass memtest in every slot except that 1 slot, the slot is bad. You'll have to RMA the board.
My System SpecsSystem Spec
Reply

 Multiple BSOD Errors when gaming/youtubing and failed startups




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD while gaming, multiple errors
I've been getting BSOD's quite a lot recently. It only seems to happen while gaming. I put in a new graphics card a couple of weeks ago, the one I took out was fairly old so I couldn't play many games with it. I've been looking at the error codes but I don't think it's the same one every time,...
BSOD Help and Support
New Rig - BSOD only when gaming - Multiple errors(?).
Hey there. Just 2 days ago I put together a new build. I entered the specs when registering so I assume you can view them somewhere. Basically the entire system runs fine - Outside of gaming. Video - Fine Music/Audio - Fine Image processing (PS/Lightroom etc..) - Fine Firefox - Fine ...
BSOD Help and Support
Multiple code errors, BSOD while gaming/netflix/idle...
This has been happening for the past four months now to no avail. I get BSOD about every 1-4 days, often with different messages, but the average as of right now is 1e. Built this system in October 2010. I've always had BSOD problems, but with work getting in the way and not really using my...
BSOD Help and Support
Failed startups, system freezes+restarts, and more
Problem When I boot up my computer, things start smoothly. My mo-bo flashes and my BIOS Setup is available. Once on the "Starting Windows" screen with the pulsing windows logo, about 10 seconds in the screen will freeze. After staying frozen for a moment, the screen goes dark and my monitor...
General Discussion
BSOD while gaming or netflix streaming, multiple errors
I have been getting the BSOD for a while now. I've tried searching for ideas for a few weeks and have had no luck. I recently started playing Black Prophecy and started to get the BSOD every time I played. I also get it when streaming Netflix. I tried to make sure my drivers were up to date but I...
BSOD Help and Support
freezing / failed startups
for those who help i very much appreciate it. my computer has started freezing regularly. like every 0-45 min regular. becomes non responsive untill i turn off my computer (i know this is bad but i have no choice. i left it on for a full 18 hours and no difference) i also have problems with...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 15:10.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App