Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD UNEXPECTED_KERNEL_MODE_TRAP (7f)

31 Aug 2013   #11
x BlueRobot

 

What does it say in Device Manager, any triangles?

EDIT: Have you tried a Vista version of the driver?


My System SpecsSystem Spec
.
31 Aug 2013   #12
centaur78

Windows 7 ultimate x64
 
 

First thing you need to do is update your BIOS which is at MQ96510J.86A.1715 to MQ96510J.86A.1761

You can see from the release note that there are hell lot of updates


Second update the Chipset driver... as you haven't installed the PCI Communication driver

Thirdly download the 32bit Vista version of your Lan drivers from here and reinstall the it.

Fourthly reboot your system and run Autoruns and then click on File> Save.. Save the file in .arn format and upload here. Will have a look
My System SpecsSystem Spec
31 Aug 2013   #13
bsfinkel

Windows 7 Professional 32-bit
 
 

I will update the BIOS when I get a chance. About the PCI Communicaton Driver - I will look at the URL in your reply. When I go to the Intel download site, I can download Win 7 versions of the drivers, but I cannot download Vista versions, as Intel says that I am not running Vista. And I could not find on the Intel web site a place to download a later version of the Vista driver that was implicated in the dump. I will have a further reply when I have followed the hyperlinks in your two replies. And it is my policy not to make two changes at once; I wait between changes so that if something goes wrong, I know what change might have caused it. When I was working with IBM mainframes, we made two big changes on one day, and a problem arose. I took about a month to determine what was happening. I spent a lot of time looking at the source changes in both components, but I never found the culprit.
--Barry Finkel
My System SpecsSystem Spec
.

01 Sep 2013   #14
x BlueRobot

 

Install the Windows 7 version chipset driver, and then install the Vista version of the LAN driver.
My System SpecsSystem Spec
01 Sep 2013   #15
bsfinkel

Windows 7 Professional 32-bit
 
 

I just updated the BIOS, so I will hold off on further updates for at least 24 hours. I am not sure what you mean when you write, "Install the Windows 7 version chipset driver, and then install the Vista version of the LAN driver." I believe that my version of the chipset driver is up-to-date, as far as Intel is concerned. From the URL https://downloadcenter.intel.com/Det...eng&iid=dc_rss I downloaded INF_allOS_9.1.2.1008_PV.exe . When I ran it (I had run it earlier), I saw the output:

"Please wait while the following setup files are extracted:"

Then a message window"

The computer currently contains software version 8.4.0.1017, which is newer than the version you are about to install. Are you sure you want to overwrite the current software with the older version 9.1.2.1008?

I replied "NO", and the install process ended. I have no idea if anything was installed; I also do not know what driver(s) would have been back-level if I had replied "YES". The install process terminated right after I replied "NO", so I do not
know if that reply terminated all of the installs, There was no output was to what was happening during the installs except for the initial list of files that were being extracted from the install package. I would like to install the latest version of e1e6032.sys, the Intel Ethernet driver for Vista, but I do not know where to get an official Intel version. My Win 7 version, e1e6232.sys, is up-to-date. Other than that, I have no idea what other Intel drivers I have installed are back-level. The UpdateMyDrivers software points to "9.3.1.1009 (9/11/2012)" and says that my installed version is "6.1.7601.17514 (06/21/2006)". This is for a number of system devices. One problem I have is this - the UMD software lists, for example, "Intel(R) ICHB Family SMBus Controller - 283E", but it does not tell me what is the name of the driver file. And, as I have written earlier, I am not sure where to find the 9.3.1.1009 driver files on the Intel website.

As is the case with much software these days, the authors assume that the end-user knows what is happening, and therefore the software does not give enough information to the end-user. I have experienced many Windows pop-up error windows where I have no idea what process produced the error window. The author assumes that his/her software is the only thing running, so the error message will easily be matched to the software.

--Barry Finkel
My System SpecsSystem Spec
02 Sep 2013   #16
centaur78

Windows 7 ultimate x64
 
 

For god sake stop using "UpdateMyDriver" software... each divers have specific function and features for particular manufacturers. they are not always the same. uninstall them .

Update using the link provided in the previous post.
My System SpecsSystem Spec
02 Sep 2013   #17
bsfinkel

Windows 7 Professional 32-bit
 
 

I am not sure to what link you are referring. There are a number of hyperlinks in previous replies. I am NOT using UpdateMyDrivers to do anything other than scan my drivers and (I hope) give me an accurate report as to which drivers need to be updated. Do you know of such a tool that I can use?

And, as additional information - I have experienced two seemingly random different BSODs in the past few days:

(50) PFN_LIST_CORRUPT (4e) [Saturday evening]

EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s. [Sunday evening a few hours after I updated the BIOS]

--Barry Finkel
My System SpecsSystem Spec
03 Sep 2013   #18
x BlueRobot

 

Could you please upload the new BSODs with the same SF_Diagnostic Tool as before?

I would personally never recommend using any driver update programs, even for checking for driver updates, from my understanding, the only method they could use to check for any updates, is to check the timestamps of your drivers and then compare it to their own database of drivers.
My System SpecsSystem Spec
04 Sep 2013   #19
bsfinkel

Windows 7 Professional 32-bit
 
 

I have just uploaded a new SF zip file. On Monday I experienced a BSOD "EXCEPTION_CODE: (NTSTATUS) 0xc0000005".

Yesterday, I experienced a BSOD "bugcheck (8e)", and the system would not reboot. I had to restore from a restore point created Monday by Windiws Update.

Then, after I left the computer last night I had another "MEMORY_MANAGEMENT (1a)" BSOD.

--Barry Finkel
My System SpecsSystem Spec
05 Sep 2013   #20
x BlueRobot

 

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:
information   Information


Enable the Special Pool option too, it will be listed under "Select Individual Settings" or something similar to that; enable all the options apart from Low Resources Simulation.
My System SpecsSystem Spec
Reply

 BSOD UNEXPECTED_KERNEL_MODE_TRAP (7f)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD ntoskrnl.exe UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f
Please can someone help? I've been trying to fix my HP Pavilion dv6 3130sa notebook for a year now & I've ran out of ideas as to what to do next! The problem: My notebook keeps crashing to BSOD and reboots into safe mode options and this happens randomly. In Safe mode with networking the...
BSOD Help and Support
BSOD UNEXPECTED_KERNEL_MODE_TRAP bug check 0x0000007f
Hi I am writing in this forum as new member because I am facing the problem with BSOD and is happening on the DELL Inspiron laptop that is only two mounts old. :cry: Reading the post on the forum I did see and download SF diagnostic toll in attachment is the folder created with this tool....
BSOD Help and Support
Bsod - unexpected_kernel_mode_trap
Hi SevenForums members, Windows 7 Service Pack 1 x86 My OS is retail version. Some of my hardware is already 3 years old, some of it is 2 years old. Age of OS installation - have you re-installed the OS? My OS is 1 year old, before this problem occur, I already has other problem...
BSOD Help and Support
BSOD UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f after graphics driver
I cannot find any solutions to similar problems on the internet. I replaced a broken lcd screen with a new lcd of the same brand for netbook Asus EeePC 1001P. As soon as I install Intel Graphics Media Accelerator 3150 I received BSOD. BSOD occurs soon after desktop starts to load. I do not not...
BSOD Help and Support
BSOD... UNEXPECTED_KERNEL_MODE_TRAP (7f)
My first attempt I made the mistake of not using SF Diag Tool. Please forgive me. I have included it in this thread. Basically I need help. The error occurred after a power outage. I tried to analyze my own .dmp file and I guess the problem is processor related. I really hope I do not need a...
BSOD Help and Support
Unexpected_kernel_mode_trap
-Windows 7 Ultimate x64 -Original OS -Retail Version -Built the system myself. 1-3 Years Old -OS has been installt: 23.09.2009 103010-22807-01.dmp UNEXPECTED_KERNEL_MODE_TRAP 0x0000007f 00000000`00000008 00000000`80050031 00000000`000006f8 fffff800`021ba143 ntoskrnl.exe...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:58.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App