BSOD UNEXPECTED_KERNEL_MODE_TRAP (7f)

Page 1 of 4 123 ... LastLast

  1. Posts : 48
    Windows 7 Professional 32-bit
       #1

    BSOD UNEXPECTED_KERNEL_MODE_TRAP (7f)


    Early this morning (while I was asleep) my computer (WIn7 Pro 32-bit) experienced a UNEXPECTED_KERNEL_MODE_TRAP (7f) error, reboot, minidump, and full dump. The only applications that are active (without user input) overnight are Firefox (I have a NOAA radar image running and auto-updating), Thunderbird, and BOINC SETI (to use unused cycles). I am not sure for what to search in the minidump or full dump.
    --Barry Finkel
      My Computer

  2.    #2

    Code:
    BugCheck 7F, {d, 0, 0, 0}
    
    Probably caused by : netbt.sys ( netbt!NbtQueryFindName+fb )
    Code:
    Usual causes:  Memory corruption, Hardware (memory in particular), Overclocking failure, Installing a faulty or mismatched hardware (especially memory) or a failure after installing it, 3rd party firewall, Device drivers, SCSI/network/BIOS updates needed, Improperly seated cards, Incompatible storage devices, Overclocking, Virus scanner, Backup tool, Bad motherboard, Missing Service Pack
    It seems to have been caused by a General Protection fault.

    Code:
    1: kd> lmvm e1e6032
    start    end        module name
    931c5000 931fd000   e1e6032  T (no symbols)           
        Loaded symbol image file: e1e6032.sys
        Image path: \SystemRoot\system32\DRIVERS\e1e6032.sys
        Image name: e1e6032.sys
        Timestamp:        Tue Mar 24 18:16:11 2009 (49C9236B)
        CheckSum:         0003FF3E
        ImageSize:        00038000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Your Intel PRO/1000 Adapter NDIS 6 deserialized driver seems to be a possible cause, please update the driver from here - https://downloadcenter.intel.com/Default.aspx

    Remove:

    Code:
    Start Menu\Programs\Advanced SystemCare 6
    Windows 7 doesn't require any programs which make changes to the operating system and registry, these programs tend to cause problems by modifying and deleting files.

    Windows is a closed source system. Developers of registry cleaners do not have the core code of Windows 7 and are not working on definitive information, but rather they are going on past knowledge and experience. Automatic cleaners will usually have to do some guesswork.

    Modifying registry keys incorrectly can cause Windows instability, or make Windows unbootable. No registry cleaner is completely safe and the potential is ever present to cause more problems than they claim to fix.

    Registry cleaners cannot distinguish between good and bad. If you run a registry cleaner, it will delete all those keys which are obsolete and sitting idle; but in reality, those keys may well be needed by some programs or windows at a later time.

    Windows 7 is much more efficient at managing the registry than previous Windows versions. If you run any other registry cleaner and do not know precisely what you are doing, you will have problems down the road. There are no gains to be had from using a registry cleaner and the risk is great.
    Remove:

    Code:
    Start Menu\Programs\Webroot SecureAnywhere
    Running multiple real-time protection programs can cause serious conflicts and crashes. Please note this program does cause BSODs.
      My Computer


  3. Posts : 48
    Windows 7 Professional 32-bit
    Thread Starter
       #3

    I am confused. That Intel URL told me:

    Product Detected Intel(R) 82566DC Gigabit Network Connection
    Current Driver Installed 9.13.4.10
    This device is unknown or unsupported. Please contact the manufacturer for possible updates. More information>>

    I did many searches on the Intel web site for e1e6032.sys, and I found that the latest version is 9.16.10.0. I tried a Win 7 install, and nothing was installed because nothing fit. The Intel site says that e1e6032.sys is for my controller (82566DC) but for Vista and Server 2008 32-bit. I tried to install a Vista driver set, and it installed. But it did not update e1e6032.sys. When I looked at the properties of e1e6032.sys, it shows 9.13.4.10 and a 7/13/2009 date. When I then go to the Intel auto-search utility, it shows me that e1e6032.sys is now at 9.16.10.0 . This confuses me. Note that I did not reboot after the driver install, and a search of the \Windows directory shows all copies of e1e6032.sys with the 2009 date. A Google search for "e1e6032.sys" showed versions that I could download, but they were LATER than 9.6.10.0, and I am not sure that trust a driver download from "any old" web site. I will reboot now.
    --Barry Finkel
      My Computer


  4. Posts : 48
    Windows 7 Professional 32-bit
    Thread Starter
       #4

    I am confused. That Intel URL told me:

    Product Detected Intel(R) 82566DC Gigabit Network Connection
    Current Driver Installed 9.13.4.10
    This device is unknown or unsupported. Please contact the manufacturer for possible updates. More information>>

    I did many searches on the Intel web site for e1e6032.sys, and I found that the latest version is 9.16.10.0. I tried a Win 7 install, and nothing was installed because nothing fit. The Intel site says that e1e6032.sys is for my controller (82566DC) but for Vista and Server 2008 32-bit. I tried to install a Vista driver set, and it installed. But it did not update e1e6032.sys. When I looked at the properties of e1e6032.sys, it shows 9.13.4.10 and a 7/13/2009 date. When I then go to the Intel auto-search utility, it shows me that e1e6032.sys is now at 9.16.10.0 . This confuses me. Note that I did not reboot after the driver install, and a search of the \Windows directory shows all copies of e1e6032.sys with the 2009 date. A Google search for "e1e6032.sys" showed versions that I could download, but they were LATER than 9.6.10.0, and I am not sure that trust a driver download from "any old" web site. I will reboot now.
    --Barry Finkel
      My Computer

  5.    #5

    That's strange, and don't download any drivers from any other website apart from the manufacturer or your motherboard support page. What's it like after reboot?
      My Computer


  6. Posts : 48
    Windows 7 Professional 32-bit
    Thread Starter
       #6

    After the reboot:

    \Windows\system32\Drivers\e1e6032.sys 7/13/2009 5:02PM 207kb

    The Intel driver page Intel® Driver Update Utility for wired networking shows (after I run the applet):

    Product Detected Intel(R) 82566DC Gigabit Network Connection
    Current Driver Installed 9.16.10.0
    This device is unknown or unsupported. Please contact the manufacturer for possible updates. More information>>

    I am sure that it said 9.13.4.10 before I did any installs this morning.

    The driver file:

    e1e6232.sys 9.16.10.0 10/30/2012 4:22AM 227KB

    I believe that this 6232 file is the one used by Windows 7, and the auto-detect utility finds it.

    What I do not understand (and I do not know the internals of Windows 7), is how e1e6032.sys is implicated in the dump, when that driver is supposedly not used in Windows 7. I would like to upgrade that driver file to the latest version mentioned on the Intel web site, but I have found no way to download that file from Intel. I downloaded DriverVIew from Nir Sofer, and that utility's output lists e1e6232.sys but not e1e6032.sys .

    I also do not understand why the Intel auto-detect applet claims that the device is unknown or unsupported. I did write a lengthy comment on the Intel web site, and I included my name and e-mail address. I have no idea if Intel will contact me.

    --Barry Finkel
      My Computer

  7.    #7

    Did you upgrade to Windows 7 or install Windows 7?

    Have you tried your motherboard support page?

    Hopefully Intel will contact you.
      My Computer


  8. Posts : 48
    Windows 7 Professional 32-bit
    Thread Starter
       #8

    This was a fresh install of Windows 7 Profressional 32-bit. I never do an upgrade install because 1) I want to preserve my old system in case something happens, and 2) where I used to work, the Windows support staff said that upgrade installs are risky.

    My motherboard is an Intel DP965LT.

    --Barry Finkel
      My Computer

  9.    #9

    Support page for your motherboard - Support for the Intel® Desktop Board DP965LT

    According to this, your motherboard doesn't have Windows 7 support.
      My Computer


  10. Posts : 48
    Windows 7 Professional 32-bit
    Thread Starter
       #10

    Some questions and comments. Intel says that my board does not have Win 7 support, but other posts on SevenForums say that there is no problem with that board and Win 7. Intel has not responded to my query about drivers, and when I tried to ask a question on the Intel support page, the box was one line long, and it did not accept more than about 150 characters, so I could not ask a detailed technical question.

    When I use a utility such as UpdateMyDrivers to see if there are newer versions of the drivers I have installed, I see reference to Intel drivers 9.3.1.1009 (9/11/2012), and my drivers are 6.1.7601.17514 (6/21/2006). I can do Google searches and find many sites that have the 9.3.1.1009 drivers for download, but I cannot find those drivers on the Intel web site, so I have no idea if those 1009 drivers are genuine. And, as I mentioned in a previous post, the Intel driver identifier tool says that my devices are "unknown or unsupported". 19 of my 24 outdated drivers (according to UpdateMyDrivers) are Intel.

    --Barry Finkel
      My Computer


 
Page 1 of 4 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:37.
Find Us