Start by updating your system specifications so we would have a better understanding
of the hardware involved.
What I can pick from the .zip file you uploaded is as such:
Code:
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: fffffa800e2991c0, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff880051924a8, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.
This bugcheck is usually associated with driver failure but can be attributed to hardware under the right circumstances.
DXDIAG reports HD graphics as your GPU, which is another reason to why I asked you
to fill-out your system specifications.
Code:
Card name: Intel(R) HD Graphics 4000
Code:
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa80070b5028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000b2000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000081000402, Low order 32-bits of the MCi_STATUS value.
Code:
===============================================================================
Section 2 : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor @ fffffa80070b5138
Section @ fffffa80070b52c0
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : Internal unclassified (Proc 6 Bank 4)
Status : 0xb200000081000402
This Bugcheck is always hardware, this time is the CPU that raised the red flag
and initiated the crash procedure but that doesn't mean it is the one
that committed the fault.
These two Bugchecks could be related to one another and you're insufficient PSU as you
suggested to be the case on the 1st post.
Clear enough space in your system partition, your pagefile is shrinking as a result
of lack of space which will lead to problems in the longer term.
Code:
Drive C:
Description Local Fixed Disk
Compressed No
File System NTFS
Size 57.51 GB (61,750,636,544 bytes)
Free Space 7.96 GB (8,548,605,952 bytes)
Code:
Installed Physical Memory (RAM) 8.00 GB
Page File Space 4.14 GB
- Ideally these values should be the same.
Cleanup your stratup by following this tutorial.