Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD's still rampant 0x1a 0x107e 0x24

22 Aug 2013   #1
Grunter

Windows 7 Ultimate x64
 
 
BSOD's still rampant 0x1a 0x107e 0x24

Hello Again,
Still getting blue screens and massive program crashing and errors, going from indexing to not even able to open the program.
BSOD's 0x1a, 0x107e 0x24
Today (aug 22) I swapped out the video card which had been considered the cause of the problem failing all stress tests and in fact not even allowing a new drive to get the drivers installed.

Have swapped Video
Have scanned HDD's via Chksk and Seatools 1.2.0.5 (since the current version has a JIT error and wont run)
Have scanned memory with the windows memory tool

Cannot scan via seatools for DOS or spinwrite because the drive is larger than 650gigs (size 2tb)
Cannot scan via memcheck because again amount of ram is too larg (32 gigs)

All except the previous video card passed clean with no problems. I have included the dump files

Any help appreciated.


My System SpecsSystem Spec
.
23 Aug 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

MSINFO32:
Please go to Start and type in "msinfo32.exe" (without the quotes) and press Enter
Save the report as an .nfo file, then zip up the .nfo file and upload/attach the .zip file with your next post.
Also, save a copy as a .txt file and include it also (it's much more difficult to read, but we have greater success in getting the info from it).

systeminfo:
Please open an elevated (Run as administrator) Command Prompt and type (or copy/paste) "systeminfo.exe >%USERPROFILE%\Desktop\systeminfo.txt" (without the quotes) and press Enter. Then navigate to Desktop to retrieve the syteminfo.txt file. If you have difficulties with making this work, please post back. Then zip up the .txt file and upload/attach the .zip file with your next post.
My System SpecsSystem Spec
23 Aug 2013   #3
Grunter

Windows 7 Ultimate x64
 
 

Well cannot do the 2nd part because upon boot got a BSOD 0x050, and then in reboot ended up getting some error about the profiles, so cannot run admin.

I really hope something comes to light its been a month of constant crashes BSOD's and trying to get anything done, till July the system was fine, solid and the only crashes were the wacom tablet driver.

Ive gone through RMA hd's but could not even install because of video crashing, have purchased and replaced video and still crashing, avg seemed a problem and removed it not sure what else can be flipping out. Im somewhat frustrated
My System SpecsSystem Spec
.

23 Aug 2013   #4
Grunter

Windows 7 Ultimate x64
 
 

Rebooted and was able to get the system info
My System SpecsSystem Spec
23 Aug 2013   #5
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please uninstall Zone Alarm and report results.
information   Information

Opt for "Advanced Mode" and uninstall the software (also delete the leftover registry entries).


Microsoft Security Essentials & the Free version of Malwarebytes, update and make full scans separately:
Uninstallers (removal tools) for common antivirus software - ESET Knowledgebase

Help protect your PC with Microsoft Security Essentials

Malwarebytes Free
Do not start the trial version of MalwareBytes

You may also take a look at:
Good & Free System Security Combination

Run the System File Checker that scans the of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible:

Click on the
Type CMD on Search
Left click and Run as Administrator
Type SFC /scannow

Full tutorial here:
SFC /SCANNOW Command - System File Checker

Run Disk Check on your hard disk for file system errors and bad sectors on it:
Disk Check
Follow these steps also.

Make scans with -
TDSSKiller Rootkit Removal Utility Free Download | Kaspersky Lab US

Online Virus Scanner Eset
My System SpecsSystem Spec
23 Aug 2013   #6
Grunter

Windows 7 Ultimate x64
 
 

Ok before I uninstall ZoneAlarm may I ask why that would conflict?
My System SpecsSystem Spec
23 Aug 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Difficult to say why ... but it does, and it is doing for your case.
Code:
fffff880`035a7758  fffff880`05f948a1Unable to load image \SystemRoot\system32\DRIVERS\vsdatant.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for vsdatant.sys
*** ERROR: Module load completed but symbols could not be loaded for vsdatant.sys
 vsdatant+0x8d8a1
Description here : Driver Reference Table - vsdatant.sys
My System SpecsSystem Spec
24 Aug 2013   #8
Grunter

Windows 7 Ultimate x64
 
 

After installing Zone alarm first boot pegged the CPU to 100% and could do nothing, hit reset, booted back in, and got BSOD 0x3b, successful boot after that crashed the wireless but it was recovered.
Installed malaware and running the scan.
The dump files are included
My System SpecsSystem Spec
24 Aug 2013   #9
Grunter

Windows 7 Ultimate x64
 
 

Malaware found nothing
Scan

Beginning system scan. This process will take some time.

Beginning verification phase of system scan.
Verification 100% complete.

Windows Resource Protection did not find any integrity violations.
My System SpecsSystem Spec
24 Aug 2013   #10
Grunter

Windows 7 Ultimate x64
 
 

Also have done multiple drive checks, with the windows and seatools all drives are good
My System SpecsSystem Spec
Reply

 BSOD's still rampant 0x1a 0x107e 0x24




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Lots off BSOD like 0x3b,0x24,0x1a,0X7e,0x50 etc
Started with no reason.. week before i updated graphics card driver. When i ran Memtest86, its shows lots of errors. Is it RAM false and why it started? Thanks to all before!
BSOD Help and Support
BSOD Playing Dota2,Borderlands and other "source" games (0x1a,0x24...)
So... I'm having issues with all kind of BSOD's and Appcrashes. The only thing that i can normaly launch is Half-Life 1 and Counter-Strike 1.6, in all other games sometimes i am getting instant appcrash, sometimes bsod after playing a while. I tried to run "clean" boot , installing...
BSOD Help and Support
Random BSODs. Mostly 0x1A, but also 0x24, 0xE4, 0x19, 0x9F
I had 19 crashes in the past 4 month. A computer is 13 month old, the first BSODs happened on 27/12/2011. The exact statistics: 0x1A MEMORY_MANAGEMENT - happened 10 times (the 5 most recent crashes were 0x1A) 0x24 NTFS_FILE_SYSTEM - 4 times (the most recent happened 3 weeks ago) 0xE4...
BSOD Help and Support
BSOD on newly built PC (0x24, 0x7E, 0x1A)
I have been facing this problem ever since I first assembled my pc. I am not an expert but I don't think I have messed my hardware. The PC is 10 days old. I am not sure but maybe there is some sort of incompatibility with my hardware and Win7. I am currently running Win7 Ultimate x64. My pc spec...
BSOD Help and Support
rampant BSOD help please!!
Hi everyone I'm sort of new to this forum so excuse the sorryness of the post. So I have a HP dm4t-1100, and it was working perfectly for the first 3 weeks or so until it started getting blue screens about a couple of weeks ago. It always comes randomly at the most inconvenient times, and I...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App