BSOD while idling on clean install

Page 1 of 3 123 LastLast

  1. Posts : 14
    Windows 7 Home Premium 64bit
       #1

    BSOD while idling on clean install


    I was having BSOD for a while randomly and I was in need of a new HD anyways. Purchased a HD and did a clean install, all updates, updated drivers. I ran memtest and found one stick failing. Now I have had 3 more BSOD in 4 days while idling. Before I had them at idle and using it. I have no idea how to read these dumps. I just see WIN7_DRIVER_FAULT on all of them and 3 different processes involved.

    Would someone be so kind as too look at these 3 dumps I attached and point me in the right direction?

    Thanks in advance

    Sorry, instructions now followed and uploaded
    Last edited by Jptalon; 18 Aug 2013 at 17:10. Reason: Being a noob
      My Computer

  2.    #2
      My Computer


  3. Posts : 14
    Windows 7 Home Premium 64bit
    Thread Starter
       #3

    Updated correctly
      My Computer

  4.    #4

    Code:
    BugCheck 50, {fffff88012fda590, 1, fffff8000329361f, 2}
    
    Could not read faulting driver name
    *** WARNING: Unable to verify timestamp for win32k.sys
    *** ERROR: Module load completed but symbols could not be loaded for win32k.sys
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43836 )
    Code:
    Usual causes:  Defective hardware (particularly memory - but not just RAM), Faulty system service, Antivirus,  Device driver, NTFS corruption, BIOS
    Code:
    2: kd> k
    Child-SP          RetAddr           Call Site
    fffff880`09b30f88 fffff800`0330c5d4 nt!KeBugCheckEx
    fffff880`09b30f90 fffff800`0328dcae nt! ?? ::FNODOBFM::`string'+0x43836
    fffff880`09b310f0 fffff800`0329361f nt!KiPageFault+0x16e
    fffff880`09b31280 fffff880`0121185c nt!IopfCompleteRequest+0x38f
    fffff880`09b31370 fffff880`0120e2a5 Ntfs!NtfsExtendedCompleteRequestInternal+0x11c
    fffff880`09b313b0 fffff880`0120e478 Ntfs!NtfsCommonRead+0x1bdc
    fffff880`09b31520 fffff880`01033bcf Ntfs!NtfsFsdRead+0x1b8
    fffff880`09b31730 fffff880`010326df fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x24f
    fffff880`09b317c0 fffff800`032b6e15 fltmgr!FltpDispatch+0xcf
    fffff880`09b31820 fffff800`032b68e9 nt!IoPageRead+0x255
    fffff880`09b318b0 fffff800`0329d28a nt!MiIssueHardFault+0x255
    fffff880`09b31980 fffff800`0328dcae nt!MmAccessFault+0x146a
    fffff880`09b31ae0 000007fe`ffd5ff2b nt!KiPageFault+0x16e
    00000000`0891d860 00000000`00000000 0x000007fe`ffd5ff2b
    There seems to quite a few disk I/O related calls within the call stack, this further suggests that AVG may be causing problems, since AV programs perform constantly filtering of disk I/O.

    Remove:

    Code:
    Start Menu\Programs\AVG
    AVG is known to cause BSODs, please remove the program completely with the AVG Removal Tool, and then install and run full scans with these free and proven alternatives, which work best with the operating system due to their compatibility and lightweight nature on system resources.

    Install and perform full scans with:

       Information
    Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

    You can also view this thread for a complete free and lightweight security protection combination:
      My Computer


  5. Posts : 14
    Windows 7 Home Premium 64bit
    Thread Starter
       #5

    Thank you, I never would have suspected AVG. Though it has only been a few mins since it is gone and no BSOD yet. I have noticed speed increased and one particular page I load very often each day no longer hangs at the 70% to 90% mark like it has been doing since this fresh W7 install.
      My Computer

  6.    #6

    Leave this thread open for a few days, and then post an update :)
      My Computer


  7. Posts : 14
    Windows 7 Home Premium 64bit
    Thread Starter
       #7

    I have yet to get it to act up at all. Though it did BSOD on a reboot after using AVG uninstaller, but that was the coretemp file. This coretemp file has done this a few times and only on startup. I have disabled it on startup and will see if it continues to be a problem. One thing that is strange, is that my windows media player wont play videos again. It did this before the clean install right after it started to act up.
      My Computer

  8.    #8

    Scan for any missing, modified or corrupted protected Windows files with:

    Here is a alternative work around - VideoLAN - Official page for VLC media player, the Open Source video framework!
      My Computer


  9. Posts : 14
    Windows 7 Home Premium 64bit
    Thread Starter
       #9

    The scan found no integrity violations.

    I got another video player working, I just thought this might have been linked to a problem
      My Computer

  10.    #10

    I would say it's a different problem :)
      My Computer


 
Page 1 of 3 123 LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:06.
Find Us