Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD After opening laptop when left running. 0x000004f

26 Aug 2013   #1
timchya

Windows 7/8
 
 
BSOD After opening laptop when left running. 0x000004f

Hey Guys,

Getting a consistent bluescreen each time I leave the laptop running, close the lid, and reopen it.

Been happening since I swapped out my SSD in the laptop. The old one was reporting backs sectors so I pulled it out, and tossed in a new Intel one. Checked firmware, everything is up to date. Not sure where to go from here, can someone check out the dump file I've posted?

Thanks guys!


My System SpecsSystem Spec
.
26 Aug 2013   #2
YoYo155

Windows 10
 
 

Hello .

All your bugchecks are 0xF4 which are storage related.
since you already updated your SSD's firmware let's explore other
possibilities.



Post back with the results!
My System SpecsSystem Spec
26 Aug 2013   #3
timchya

Windows 7/8
 
 

Hey Yoyo,

There is a completely fresh install of Windows 7 on this HDD tdsskiller came back clean, and sfc /scannow came back clean.

I've uploaded a screenshot of the summery tab for you.
My System SpecsSystem Spec
.

26 Aug 2013   #4
YoYo155

Windows 10
 
 

Right couple of other things I need to know, if I may.

What is the sub-model of your Aspire S3?


Stress the CPU for 45 minutes using Prime95 but making sure that the temperatures don't exceed 82C! Use Speccy to monitor temps then upload a screenshot right before you stop the test.


What intel software do you have installed on the laptop?
Code:
Start Menu\Programs\Intel
My System SpecsSystem Spec
26 Aug 2013   #5
timchya

Windows 7/8
 
 

Okay!

Sub Model is the Aspire S3 951.

Starting stress test now, will report with results.

Intel software installed is the Intel SSD Toolbox.

Edit: Just got the results. Attached the screenshot
My System SpecsSystem Spec
27 Aug 2013   #6
YoYo155

Windows 10
 
 

That is really hot, but considering it is while under an artificial work load I can assume
that under normal conditions the CPU temperature won't get as high.

I will consult others about this issue, more help should come sooner rather than later.

Edit:

In the mean time update your Intel drivers by using this online utility.
My System SpecsSystem Spec
27 Aug 2013   #7
timchya

Windows 7/8
 
 

I'll run that update utility and see if it finds anything. Thanks for your help Yoyo.

Just to reiterate, this happened AFTER an SSD swap and new image of Win 7 was loaded onto the PC. Manually ran updates on the machine, and so far it ONLY blue screens when I leave the laptop running, close it, and open it again. Without fail, as it loads back up it'll BSOD.

Thanks guys
My System SpecsSystem Spec
27 Aug 2013   #8
YoYo155

Windows 10
 
 

Did you have an SSD prior to this one or an HDD?
How long does it take to bugcheck once you open it?
Care to try to replicate the issue while in safe-mode?
Let us know the results.
My System SpecsSystem Spec
27 Aug 2013   #9
timchya

Windows 7/8
 
 

Yes. I replaced an SSD with another SSD.

Takes between 5-30 seconds. And I just tested it out, looks like it happens each time the PC goes into Sleep mode. After it exits sleep mode and goes to the select users page, I select the user and it attempts to 'load' the user, after trying this for several seconds, the PC goes into bluescreen.

No bluescreen in safemode, but also couldn't find an option to put it asleep.

Edit: Also doesn't do it if I put it in hibernate mode.
My System SpecsSystem Spec
27 Aug 2013   #10
YoYo155

Windows 10
 
 

Quote   Quote: Originally Posted by timchya View Post
Yes. I replaced an SSD with another SSD.

Takes between 5-30 seconds. And I just tested it out, looks like it happens each time the PC goes into Sleep mode. After it exits sleep mode and goes to the select users page, I select the user and it attempts to 'load' the user, after trying this for several seconds, the PC goes into bluescreen.

No bluescreen in safemode, but also couldn't find an option to put it asleep.

Edit: Also doesn't do it if I put it in hibernate mode.
Right, running Driver Verifier will our next step.
While running Driver Verifier trigger the BSOD in the same manner as before.

Quote   Quote: Originally Posted by Arc View Post
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

My System SpecsSystem Spec
Reply

 BSOD After opening laptop when left running. 0x000004f




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
crashing while I am sleeping, laptop left running
I leave my Acer 5733Z laptop running most of the time. The past few days, I have been waking up to see that the system crashed during the night. I get the safe mode startup screen when I restart the computer. I don't know what is causing this, although I did run Iobit Advanced System Care 7 the...
BSOD Help and Support
BSOD when opening laptop
This is a problem that began literally overnight, I'm not sure what the issue is. I then get a notification that "Windows recovered from an unexpected crash" and presents this error message: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.768.3 Locale ID: 1033 Additional...
BSOD Help and Support
Library PC which should be left all day has BSOD 2 days running!
Hi, We have a networked PC here which used for checking books in and out of our library and it has blue screened 2 days in a row, nobody has been using this pc when it has blue screened. I have downloaded SF diag tool but everytime I try to run it and each individual component it gives me the...
BSOD Help and Support
Auto-snap to left when opening new window
I use Winkey+E all the time to open a new window. Is there a way to have the new window auto-snap to the left?
Software
BSOD when I left my computer running overnight
As the title says, I had a BSOD after I left my computer running overnight. I don't remember a previous occurrence of this. Help? Attached are the dmp files I found and the files generated by SF.
BSOD Help and Support
Left click boxes opening
I'm being trying to figure out some funny mouse happenings to see what program might be causing the problem. Sometimes when I attempt to select several words in a sentence the high lite stops during the drag operation and thhe edit box appears. I might try this several times before it finally...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:23.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App