Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Memory_Management 0x0000001A

06 Sep 2013   #11
uglistix

Windows 7 Ultimate N x64
 
 

Looks like I have some homework for the weekend! Thanks - I'll work through these steps over the weekend and report back when done.


My System SpecsSystem Spec
.
11 Sep 2013   #12
uglistix

Windows 7 Ultimate N x64
 
 

Ok - so I worked through the list.

1. I removed a few non-essential items from the startup programs.

2. I wasn't able to verify that I had "Intel Rapid Storage". I was a bit loathe to remove the "items under disc drives" because this included my main drive - the SSD! So I haven't completed this step...

3. Checked with OCZ and I have the latest firmware according to their SSD Util tool. My bios version was already up to date. I ran Intel's Inf checking tool and it suggested only two drivers needed updating - the Graphics HD 4000, Centrino Wireless-N 135. Both of these are now up to date. I also noticed the Realtek ethernet drivers were out of date - so I updated these.

4. I ran the System File Checker. It did not find any "Integrity Violations"

5. I ran the Disk Checker (both boxes ticked). As I only have one drive it scheduled the job for the next reboot. After rebooting it ran the checks and did not find any issues.

6. I ran the GPU stress testing until the temperatures stopped rising (note that Furmarker wasn't able to display the temps - I had to install another app to monitor this!). Temperatures stopped rising at 71C after abour 15 minutes.

I then had to take a break from testing the PC as my wife needed it back (she uses it for her photography business). Whilst she was using it she got a new BSOD message - something about "Bad Pool Header". I'm not sure if this is related to the original Memory Management BSOD or if this is something new that I've somehow introduced with all the dirver updates?!

I've attached the latest output from the SF Diagnostic tool.

Thanks!
My System SpecsSystem Spec
11 Sep 2013   #13
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please update the drivers below.

SiLib.sys Wed Feb 7 05:13:54 2007 ~ USBXpress Development Kit
Driver Reference Table - SiLib.sys

DSI_SiUSBXp_3_1.sys Wed Feb 7 05:15:34 2007 ~ Garmin ANT wireless USB stick
Driver Reference Table - DSI_SiUSBXp_3_1.sys
------------------------
To perform a clean install of a driver, follow this tutorial:------------------------
Reduce the start-up items, Antivirus software is basically whats required.
Code:
**************************Wed Sep 11 01:49:07.612 2013 (UTC + 6:00)**************************
Loading Dump File [C:\Users\Usra\091013-5397-01.dmp]
 
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
 
Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
 
Built by: 7601.18205.amd64fre.win7sp1_gdr.130708-1532
 
System Uptime: 3 days 22:50:31.472
 
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
 
Probably caused by : ntoskrnl.exe ( nt+75b80 )
 
BugCheck 19, {21, fffff8a0000f5000, 2530, 2520}
BugCheck Info: BAD_POOL_HEADER (19)
 
Arguments: 
Arg1: 0000000000000021, the data following the pool block being freed is corrupt.  Typically this means the consumer (call stack ) has overrun the block.
Arg2: fffff8a0000f5000, The pool pointer being freed.
Arg3: 0000000000002530, The number of bytes allocated for the pool block.
Arg4: 0000000000002520, The corrupted value found following the pool block.
BUGCHECK_STR:  0x19_21
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии`
If the bsods continue enable driver verifier.
------------------------
Enable Driver Verifier to see if it catches any misbehaving driver:
My System SpecsSystem Spec
.

15 Sep 2013   #14
uglistix

Windows 7 Ultimate N x64
 
 

Thanks. Both of the drivers highlighted are installed as part of Garmin's ANT+ USB stick. I went to Garmin's website and they didn't have any updated drivers. ANT's website seemed to be for developers and I couldn't find any USB drivers that weren't part of a full blown SDK. Whilst I was searching for the drivers I started the Garmin software so that I could try the "Check for Updates" option and within a few seconds of starting it I got the memory management BSOD. This happened twice! So I decided to completely remove all ANT and Garmin software and drivers as I don't really need it on this computer anyway.

I removed another 4 or 5 items from the start up - including Sandboxie, Onenote, Power ISO.

There were another 30 or so "important" updates from Windows which I have now installed.


I'll keep an eye on the system and post back with an update in a few days.

Thanks!
My System SpecsSystem Spec
21 Sep 2013   #15
uglistix

Windows 7 Ultimate N x64
 
 

The system had been working fine for the last few days - but then today I got 2 of the memory management BSOD within a few minutes of each other. Each time it was about 30 seconds after I had started to transfer some photos of a memory card (memory card plugged in via the USB 3.0 port). I was eventually able to transfer the files successfully using a USB 2.0 port.

Once again I've attached the SF Disagnostic files.
My System SpecsSystem Spec
21 Sep 2013   #16
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Code:
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sat Sep 21 20:01:55.441 2013 (UTC + 6:00)
System Uptime: 0 days 0:05:45.300
BugCheck 1A, {41790, fffffa8000c5ff10, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  svchost.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18229.amd64fre.win7sp1_gdr.130801-1533
Debug session time: Sat Sep 21 19:54:58.555 2013 (UTC + 6:00)
System Uptime: 5 days 18:01:48.427
BugCheck 1A, {41790, fffffa80007ebf10, ffff, 0}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+35084 )
BUGCHECK_STR:  0x1a_41790
PROCESS_NAME:  MsMpEng.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
------------------------
Test and Diagnose RAM Issues with Memtest86+:
Tip   Tip
  • Pay close attention to Part 3 of the tutorial "If you have errors"
  • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.
My System SpecsSystem Spec
Reply

 BSOD Memory_Management 0x0000001A




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD when Stress Testing, MEMORY_MANAGEMENT 0x0000001a
Hello, I have recently been stress testing my system to ensure that it is 100% stable before i proceed to overclocking. I first ran P-95 a couple of times and each time i got a BSOD after about 10 minutes. I thought i fresh install of windows would fix the problem, so i tried that. No luck, i...
BSOD Help and Support
BSOD (MEMORY_MANAGEMENT, 0x0000001a)
Hey, since 2 days ago I'm getting BSOD's at seemingly random intervals. I've provided an SF Dump in the attachments, and here's the error; Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 1043 Additional information about the problem: ...
BSOD Help and Support
New build memory_management BSOD (0x0000001a)
Hi I've recently finished a new build but for the first 2 boots of every day I get the memory_management BSOD and then I will not happen again until the next day no matter what I do. I have also had the Page Fault in Nonpaged Area BSOD and multiple process exceptions if window actually starts...
BSOD Help and Support
BSOD MEMORY_MANAGEMENT ntoskrnl.exe 0x0000001a
This is unbearable. Win7-64b Had constant mem management bsods when putting together a new system, ran verifier and mem test for going on 13hrs and both came up fine. Replaced the motherboard and still had the same errors, thought it might be a corrupt install so clean installed win7...
BSOD Help and Support
BSOD: MEMORY_MANAGEMENT Happens every day 0x0000001a
This has been happening ever since I built my computer. I tried memtest86, but it said I had 400,000 errors, and it was checking my CPU for some reason. I'm running Windows 7 on a 64bit computer. It isn't even a month old yet, I had to install the OS, full retail. I appreciate any help I can...
BSOD Help and Support
BSOD Memory_Management Stop: 0x0000001a
Hi, I have a VOSTRO 1500 upgraded from Windows XP to Windows 7 However, after the upgrade i've been getting the bluescreen attached. Please advise? anyone..? Thanks!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 21:24.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App