Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD problems...

07 Sep 2013   #1

Windows 7 Professional 64bit
 
 
BSOD problems...

Hello

Since i put my new rig together, which basicly consists of a new motherboard and cpu

Gigabyte G.1 Sniper 5 and a Intel 4770k , i've had various BSOD's , both with and without OC'ing

Even when running complete stock and trying to see if its stable, the computer would BSOD on me or lock up, this has both happened with IntelBurnTest and OCCT

I've attached my Minidumps, i am kinda at a loss here, don't know if there is something wrong with my windows install of if my cpu is semi defective.

Any help is appreciated.

Best Regards.

My System SpecsSystem Spec
.

07 Sep 2013   #2

Windows 7 Professional 64bit
 
 

Turned off the PC , cleared cmos on the motherboard, booted back up , loaded optimized defaults, went back into windows to do another stress test even without putting my memory back up to 2133mhz ( they worked fine on previous motherboard for 6+ months ) , left everything at default.

another bsod with 0x00000c5 code.

attached latest minidump
My System SpecsSystem Spec
08 Sep 2013   #3

Windows 7 Professional 64bit
 
 

Edited my first post with all the information from the SF tool

and another minidump
My System SpecsSystem Spec
.


08 Sep 2013   #4

Microsoft Windows 7 Pro 64-bit SP1
 
 

Hello Kazad, First I would like to say that I am sorry for it taking so long for us to reply. But let's get started!

MSINFO32 Analysis:

Code:
Start Menu\Programs\Advanced SystemCare Ultimate
Advanced System Care is a program that modifies registry entries, and can cause BSODs. Please remove, and do not use registry modifiers.

Dump Analysis:

I'm going to take this one slow because it is coming up with several different causes. Here is the first one I would like to try and mark off:

Code:
Probably caused by : GenuineIntel
 
WHEA_UNCORRECTABLE_ERROR (124)
This is basically saying it's an hardware error. So please do the following:

BUG CHECK:

Quote:
BugCheck 0x124


warning   Warning
Before you proceed with the following, answer these two questions: Are you still under warranty? Does your warranty allow you to open up the machine to check hardware? If you are unsure of the answers to these questions, contact your system manufacturer. WARNING: The steps that follow can void your warranty!!!

For your hardware stop 0x124 crash, read through Stop 0x124 - what it means and what to try and use the following hardware checks to supplement that link.
  • If you are overclocking any hardware, please stop.

  • If you have an SSD, make sure the following are up to date:
    • SSD firmware
    • BIOS Version
    • Chipset Drivers
    • Hard disk controller drivers/SATA drivers
    • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.

  • Run all but the advanced tests with SeaTools for HDDs.
    SeaTools for Windows

    SeaTools for DOS
  • Monitor temperatures during the following tests.
    Use the following programs to monitor the temperatures.
  • Run the boot version of Memtest86+ paying close attention to Parts 2 and 3 of the tutorial. Also, in case Memtest86+ misses anything and comes up with no errors, run the extended version of the Windows Memory Diagnostics Tool for at least five passes. These you may want to run overnight since they take a long time to complete (run them an hour before bed each of the next two nights and check before going to sleep that they are still running).

    For Part 3: If You Have Errors: If you swap any memory components, follow these steps for ESD safety:
    1. Shut down and turn off your computer.
    2. Unplug all power supplies to the computer (AC Power then battery for laptops, AC power for desktops)
    3. Hold down the power button for 30 seconds to close the circuit and ensure all power drains from components.
    4. Make sure you are grounded by using proper grounding techniques, i.e. work on an anti-static workbench, anti-static desk, or an anti-static pad. Hold something metallic while touching it to the anti-static surface, or use an anti-static wristband to attach to the anti-static material while working. If you do not have an anti-static workbench, desk, or pad, you can use your computer tower/case by finding a metal hold in it, such as a drive bay.
    Once these steps have been followed, it is safe to remove and replace components within your computer.

Coutesy of: writhziden
After you're done, please post back with the results.

-Justin
My System SpecsSystem Spec
08 Sep 2013   #5

Windows 7 Professional 64bit
 
 

Memory aren't at fault, their tested , my new PC was OC'd but i have removed the OC and the problem persisted without OC and while the system was being stress tested, Haswell run hot pr nature, but in OCCT the hottest core would hit 68 and in IntelBurnTest the hottest core would hit 75 that program is a little more intense, firmware is updated for my SSD's

My GPU's have been FurMark'd with their BurnIn test.

I have both Speccy , RealTemp, HWMonitor, Cpu-Z and so forth, i OC and Bench on a regular basis , but with these BSOD's im just at a loss, im currently thinking its outdated drivers for the motherboard, so i have currently gone to their website and downloaded every single driver i could find and are in the process of updating my system to current drivers.

The 124 errors are clearly on my OC part telling me the system wasn't getting enough voltage, what i don't understand is the random lockups my PC was experiencing, i could be sitting here running my 4 eve online clients, watching some League of Legends stream , system would be 45 degree's maybe and it would just freeze/lockup on me.

I have been using Advanced System Care Ultimate now for years, even back when it was just called PRO when they didn't work together with Bitdefender ( Ultimate version has AV in it )

I am no PC expert , but no rookie either, i am just no software engineer/programmer with that kind of experience, but i do know how to OC

And by no means do you need to apologize, you are doing this for free you could just tell me to "eff" off
My System SpecsSystem Spec
08 Sep 2013   #6

Windows 7 Professional 64bit
 
 

Latest BSOD after my stress test.

all drivers updated , went to gigabyte's website and got the latest officiel drivers for my gigabyte g.1 sniper 5 after installing everything in between a ton of reboots to make sure everything was done perfectly i decided to run another stress test with IntelBurnTest and a couple of minutes in.

poof BSOD


sfc /scannnow revealed no errors through its scan

EDIT : added another BSOD report this time a 3b error

Edit 2 : added another bsod report this time a c5 error

im testing the ram kits and ram slots on the motherboard, even tho i do not think its any of those thats faulty and so far i've been proving right , i get a bsod on all ports with mixed kits, hell even tried different memory than my g skill 2133 hhz , put in some corsair vengeance 1600 mhz , do not think its the board thats faulty, error is somewhere within windows and i can't seem to find it :/
My System SpecsSystem Spec
08 Sep 2013   #7

Windows 7 Professional 64bit
 
 

So i uninstalled my Tesoro Durandal Ultimate gaming keyboard and for a moment i actually thought i had outlived the BSOD since i saw IntelBurnTest take 3 passes as to before those drivers i didn't manage to pass a single run.

uploaded another bsod , this time a completely new error code, 0x00000019
My System SpecsSystem Spec
08 Sep 2013   #8

Microsoft Windows 7 Pro 64-bit SP1
 
 

Apologize for the late reply! Was out of state all day and just got back.

Let me take a look.

Code:
PROCESS_NAME:  CorsairLINK_Ha
Do you have any Corsair hardware for your computer?

Code:
CorsairLINK_HardwareMonitor.sys   Sat Jul 26 08:29:37 2008 (488B26C1)
Drivers before 2008 are known to cause BSODs. Update ALL corsair drivers that you can, and make sure they are the latest to work with windows 7.

-Justin
My System SpecsSystem Spec
09 Sep 2013   #9

Windows 7 Professional 64bit
 
 

yea i use corsair link to control my fans, it comes with Corsair H80i

the drivers are the latest there are, but is that what is causing my BSOD's ? , because i have no other way to control my fans since their connected to the PWM controller on the pump

oh and i ran throughout extended tests on my memory kits all night, or 10 passes atleast from about 10pm last night my time till 7am this morning.

no faults or errors detected
My System SpecsSystem Spec
09 Sep 2013   #10

Windows 7 Professional 64bit
 
 

Okay i uninstalled On/Off charge that comes with gigabyte newest boards, and i uninstalled CorsairLINK and i am happy to report i just did 10 runs of IntelBurnTest on Maximum with 0 faults in 4700 seconds.

So i think i can conclude my system is now stable, thank you for all your help to my self help cleansing ritual thingy.

Another reason why i hate corsair.......

You can go ahead and mark it as marked as solved when you have read this.

Have a fantastic day
My System SpecsSystem Spec
Reply

 BSOD problems...




Thread Tools



Similar help and support threads for2: BSOD problems...
Thread Forum
Solved BSOD reboot, still BSOD problems & failure to recognize Ethernet card BSOD Help and Support
Random BSOD Problems, SF BSOD Utility Files Included BSOD Help and Support
Many BSOD problems cant seem to find any software or hardware problems General Discussion
Can't start up my computer. (Driver problems, BSOD, other problems) BSOD Help and Support
BSOD Problems BSOD Help and Support
extract problems, random BSOD errors all those problems BSOD Help and Support
BSOD problems BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:01 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33