Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Recurrent BSODs with different error names


13 Sep 2013   #1

Windows 7 Ultimate x64
 
 
Recurrent BSODs with different error names

I keep getting these BSODs when I'm using my Samsung Series 7 Gamer laptop , when it's idle, when I'm shutting down, hibernating, etc.

Sometimes it says IRQL_NOT_LESS_OR_EQUAL, then SYSTEM_SERVICE_EXCEPTION, then sometimes nothing at all.

I reinstalled Windows. It was fine till I installed all my drivers. Sometimes it just hangs and nothing happens.

Sometimes the computer would just refuse to start up.

I swapped out the memory chips, but still BSODs.

My dumps Attachment 285750

My System SpecsSystem Spec
.

13 Sep 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Install Service pack 1 and all other windows updates. Otherwise the system will remain vulnerable to threats.
Code:
Windows 7 Kernel Version 7600 MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16792.amd64fre.win7_gdr.110408-1633
Learn how to install Windows 7 Service Pack 1 (SP1)
Service Pack Center - Microsoft Windows

The display driver is failing here.
Code:
fffff880`0c25c538  fffff880`04abc5d0Unable to load image \SystemRoot\system32\DRIVERS\atikmdag.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
 atikmdag+0x5e5d0
And it is too old.
Code:
fffff880`0a67b000 fffff880`0a6cc000   atikmpag   (deferred)             
    Image path: \SystemRoot\system32\DRIVERS\atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Wed Jun 29 07:41:21 2011 (4E0A89C9)
    CheckSum:         00051127
    ImageSize:        00051000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Update your ATI/AMD display driver.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Intel® Centrino® Advanced-N 6230 is also failing there.
Code:
BugCheck D1, {400000c, 2, 0, fffff8800582c697}

*** WARNING: Unable to verify timestamp for Netwsw00.sys
*** ERROR: Module load completed but symbols could not be loaded for Netwsw00.sys
Probably caused by : Netwsw00.sys ( Netwsw00+18697 )

Followup: MachineOwner
---------
Update Intel® PROSet/Wireless Bluetooth Software from https://downloadcenter.intel.com/Det...+6235&lang=eng

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Let us know the results.
My System SpecsSystem Spec
14 Sep 2013   #3

Windows 7 Ultimate x64
 
 

Thanks sire, installed the drivers... now installing service pack 1... Will finish that and get back to you. No BSODs so far.
My System SpecsSystem Spec
.


19 Sep 2013   #4

Windows 7 Ultimate x64
 
 

I updated to SP1 and updated all my drivers. My cmputer was working well for the rest of the day and then suddenly, this BSOD problems started again. Constant bootloops... BSOD as soon as it starts to boot to desktop. I run MSCONFIG and selected DIAGNOSTIC MODE in order to boot to desktop. Now that I've disabled all that i thought was responsible, now i'm trying t return to NORMAL MODE in MSCONFIG but its not happening. I've attached dumps.
Attachment 286516
My System SpecsSystem Spec
19 Sep 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Try zipping it again? This one is not working.

Attachment 286528
My System SpecsSystem Spec
20 Sep 2013   #6

Windows 7 Ultimate x64
 
 

Pardon me... Might've corrupted.

Here's it again... Attachment 286610
My System SpecsSystem Spec
20 Sep 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Still, the MSINFO32.nfo file is incomplete. It lacks our vision to your system.

Anyway,
Code:
fffff800`046710a8  fffff880`058722b2Unable to load image \SystemRoot\system32\DRIVERS\NETwsw00.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for NETwsw00.sys
*** ERROR: Module load completed but symbols could not be loaded for NETwsw00.sys
 NETwsw00+0x32b2
You need to update your Proset/wifi driver from https://downloadcenter.intel.com/default.aspx

Also, Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Let us know the results.
My System SpecsSystem Spec
Reply

 Recurrent BSODs with different error names




Thread Tools



Similar help and support threads for2: Recurrent BSODs with different error names
Thread Forum
Use folder names rather than file names Media Center
Microsoft Office Outlook 2007 - Change middle names to last names Microsoft Office
Solved Please help I can not delete file names/verify location error General Discussion
Solution for recurrent DVD/BD/CD drive does not work problem Hardware & Devices
Recurrent Windows 7 crashes BSOD Help and Support
Recurrent repair problem Installation & Setup
Recurrent problem opening links Software

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:35 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33