|16 Sep 2013||#1|
| || |
After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot
I was running 3DMark06 and got a BSOD code 124. After that every time I boot Event Viewer logs Error Codes ID 3012 and 3011. Attached are screenshots of both.
I googled this and found two different threads where someone suggested to rebuild the performance counters. Both responses were basically the same, below is one. Neither of the OP's came back and said if this worked for them.
Re: LoadPerf 3011, 3012
I had the same problem with LoadPerf and here is what I found out:
All performance counter names and explain text are maintained in string tables managed by the performance counter subsystem (Perflib).
The current contents of the performance counter string tables are corrupted and cannot be displayed. To correct the problem, rebuild the string tables.
To rebuild the string tables, on the computer that displayed the message, at the command prompt, type Lodctr /r
The contents of the string tables are automatically rebuilt.
I hope this helps
Since this was from 2008 (XP?) and the other response was for Vista I wanted to see if the guru's at SevenForums thought that this was okay before I did this.
Here are the screenshoots of my two errors.
|My System Specs|
|Similar help and support threads for2: After BSOD Event Viewer Logs Event ID 3012 and 3011 every time I boot|
|How do I use event viewer to speed up boot time||Performance & Maintenance|
|Logs in event viewer showing terminalservices log in?||Network & Sharing|
|slow boot time. have followed seavixens tute on event viewer...||Performance & Maintenance|
|Computer Hard Freezes with No BSOD or Event Viewer Logs||BSOD Help and Support|
|Event Viewer Logs - Size Adjustments||Performance & Maintenance|
|Event viewer logs||Performance & Maintenance|
|Event Viewer Chrashes browsing Event Logs||BSOD Help and Support|