Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD kernel 41 bugcheck 278

23 Sep 2013   #11
offensivforce

Windows 7 Ultimate x64
 
 

i have changed out the graphics card i had in for another gtx 580. loaded fine i ran furmark and it ran looked like it ran fine went outside while it was still running came back in and yup you guessed it pc was restarting. pc would not start it was in a continuous restart load it the windows logo and restart again i have currently got it running graphics availability is unknown i had too do a sys restore to a point where i had not even dled furmark yet that jsut finoished dling now so i will run the test again and stay here and watch it but error was still a kernel 41 and the same key words as always 0x8000000000000002 but bug check was 0 and so was the parameters. ok enough chat time too do the stress test ( remembering with my previous card i could load it for only 2 seconds, this card before i crashed and had too restore would of been an easy 30 seconds i watched it before leaving.


My System SpecsSystem Spec
.
23 Sep 2013   #12
offensivforce

Windows 7 Ultimate x64
 
 

ok i crashed in 2 seconds again this IS a COMPLETELY different card i am uploading a new zip for you guys too check out some of the check code parameters are different this time though.... INSIDE the zip is what i think is a log from furmark i am unsure of that looked like a log to me

p.s the bug check code for this crash was the original 278 again


Attached Files
File Type: zip SF_23-09-2013.zip (1.31 MB, 3 views)
My System SpecsSystem Spec
23 Sep 2013   #13
offensivforce

Windows 7 Ultimate x64
 
 

this is summary of the second gtx 580 been running for a bit over a over
My System SpecsSystem Spec
.

23 Sep 2013   #14
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Stop 0x116 is a display/graphics related BSOD. There are certain reasons that can make display crash to BSOD.
  • System/GPU overheating + dust allocation.
  • Bad/Failing display driver
  • Bad/Failing GPU
  • Inadequate power supply
Now, what comes out is .......

  • The system is not overheating at all.
  • The driver is the latest version. I asked if it BSODs with the earlier versions too, you havent answered. So considering that it is not the case.
  • Power supply is more than adequate.
It is the GPU itself that remains there. Specially when it is crashing during the stress test, we can almost certainly say that it is the GPU that is failing. Its a crazy thought to expect 100% surety in remote assistance. We just can guide you in the proper way. Dont forget that we are not able to see your system physicallyand test in hand. We are trusting on the data and information you have supplied.

Now come to teh COMPLETELY DIFFERENT CARD causing BSOD. As far as I can see, the card is .....
Quote:
Name NVIDIA GeForce GTX 580
PNP Device ID PCI\VEN_10DE&DEV_1080&SUBSYS_15893842&REV_A1\4&DCE18BE&0&0018
Adapter Type GeForce GTX 580, NVIDIA compatible
Adapter Description NVIDIA GeForce GTX 580
Adapter RAM 1.50 GB (1,610,612,736 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.2723
INF File oem19.inf (Section128 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 119 hertz
Bits/Pixel 32
Memory Address 0xDE000000-0xDFFFFFFF
Memory Address 0xC0000000-0xCFFFFFFF
Memory Address 0xCE000000-0xCFFFFFFF
I/O Port 0x0000CF00-0x0000CF7F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nvlddmkm.sys (9.18.13.2723, 10.75 MB (11,274,528 bytes), 17/09/2013 10:22 PM)
Whereas, the GPU that was in use during the previous BSOD is .....,
Quote:
Name NVIDIA GeForce GTX 580
PNP Device ID PCI\VEN_10DE&DEV_1080&SUBSYS_15893842&REV_A1\4&DCE18BE&0&0018
Adapter Type GeForce GTX 580, NVIDIA compatible
Adapter Description NVIDIA GeForce GTX 580
Adapter RAM 1.50 GB (1,610,612,736 bytes)
Installed Drivers nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version 9.18.13.2723
INF File oem19.inf (Section128 section)
Color Planes Not Available
Color Table Entries 4294967296
Resolution 1920 x 1080 x 119 hertz
Bits/Pixel 32
Memory Address 0xDE000000-0xDFFFFFFF
Memory Address 0xC0000000-0xCFFFFFFF
Memory Address 0xCE000000-0xCFFFFFFF
I/O Port 0x0000CF00-0x0000CF7F
IRQ Channel IRQ 16
I/O Port 0x000003B0-0x000003BB
I/O Port 0x000003C0-0x000003DF
Memory Address 0xA0000-0xBFFFF
Driver c:\windows\system32\drivers\nvlddmkm.sys (9.18.13.2723, 10.75 MB (11,274,528 bytes), 17/09/2013 10:22 PM)
So ..... I am not able to see the difference between these two cards.

This is your computer. Your decision is the final. You may take my/our words or not. We can just suggest based on what we see, and what we see that it is the SAME GPU caused the last BSOD that you posted.
My System SpecsSystem Spec
23 Sep 2013   #15
offensivforce

Windows 7 Ultimate x64
 
 

thanks archie i have 1 more qestion mat oh i did say yes that it was happening in earlier versions as well . I am taking your advice in and all of it of because i would be putting it bluntly stupid not too. Ok so here is my question noe i am guessing ym thrid card is going too have the exact same issue NOW i am thinking the gpu is failing because the others seem minor too me COULD the gpu have failed due too my resent power outage at my house. power went off while pc was running and in game now as we have seen just won't do what it is told. If this is possible that a power outage could destroy my gpu's i can attempt too get my insurance in on the problem because pc is insured under house and contents . my problem is i know 3rd time i ask this same thing. would a Tech see that a power outage could cause this damage and if so why only the cards why not mother board cpu etc etc etc

thanks for all your help Sincerely Adrian
My System SpecsSystem Spec
24 Sep 2013   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

I have requested my debugging guru to look at your case. Hopefully you will get the best possible suggestions very shortly.
My System SpecsSystem Spec
27 Sep 2013   #17
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

I'm sorry for the long delay. I've been quite busy with other things.

I looked into your crashes and every time I see the following error code: c000009a (Insufficient system resources exist to complete the API). This sounds very much like memory for Nvidia's drivers ran out. While you do have a lot of RAM, it's possible a driver of some sort has a very serious memory leak and is filling it up quickly. There's also a good chance this is caused by memory failure or a problem with your motherboard in supporting your RAM.

If you are overclocking your memory or anything, reset them to factory defaults. Also make sure your memory timings are correct. Can you tell me what exactly your RAM is, like what model and brand? There's a possibility your motherboard may not support your RAM configuration or those models of sticks.

There are some stuff you need to remove. First, go to the EVGA website and download and update all your motherboard's drivers for all its parts. Second, uninstall all software that comes with your motherboard, as well as TuneUp Utilities. This includes overclocking software, monitoring software, driver update software, etc. Only leave device drivers designed to make parts of your motherboard work. Everything else should be removed.

If that does not fix your problem, then do some hardware tests. I recommend starting by removing all your RAM except the first slot (any other will cause problems), and then run Memtest86+ for 7 passes (all tests done once = 1 pass) on that one stick. After that, even if it shows up bad, replace it with another stick, and test that for 7 passes as well. Repeat until you do it for all RAM sticks.

If you see that all are many of your sticks are showing up bad, it's a motherboard/PSU problem. If you see only one or maybe even just two sticks bad, it's most likely a problem with those sticks. If Memtest hangs, crashes or your system restarts during the test, then you have a serious motherboard or power supply problem and one of them has to be replaced.

I know this is a lot of work, but finding problems with hardware - especially with this much of it - is hard to do without already having the right equipment available. I am confident we have a hardware problem, but which hardware it is can be very difficult to determine. So we will need to test with brute force and process of elimination.
My System SpecsSystem Spec
28 Sep 2013   #18
offensivforce

Windows 7 Ultimate x64
 
 

Corsair CMT12GX3M3A2000C9 12GB Kit Dominator GT DDR3 that is the ram i am running. my partner only bought me 3 sticks in July for my birthday this year so one would think it would not be those sticks? sorry for the late really have had some nasty back problems and been stuck in bed for quite some time
My System SpecsSystem Spec
30 Sep 2013   #19
Vir Gnarus

Microsoft Community Contributor Award Recipient

Windows 7 64-bit
 
 

I checked the compatibility list and it doesn't even list any 2000 Mhz 4GB modules for your motherboard, only 1GB, 2GB, and 8GB. While the list is not comprehensive, it could mean that the system doesn't like 4GB modules at that particular speed (plus it said you had to overclock to even get to 2Ghz from 1333Mhz).

I noticed you only mentioned 12GB kit, but Speccy says you have 24GB installed. Do you have two sets of this kit? Have you tried reducing the amount of RAM you have installed, perhaps halving it? Again, I recommend testing one module at a time with Memtest. Also if your system somehow goes stable with one or two modules that turn out clean on Memtest, it may just be your memory configuration.

I am still puzzled about the repeated reboots once your first one kicks in. That always sounds like a PSU or temperature problem.
My System SpecsSystem Spec
30 Sep 2013   #20
offensivforce

Windows 7 Ultimate x64
 
 

yes i have 2 sets of these but the problem still existed before i put the second set of ram in. SO you don't think it is my cards? and the power supply tested fine on the website seemed too be putting out the correct voltage and watts according too the spreadsheet anyway.. The motherboard that is in the pc could be stuffed but it is watercooled ( well sure looks like it) If i was too replace it what board would run my current items obviously i would want too upgrade not downgrade so what would be a suitable comparison. i don't want any of the parts i have too go too waste such as the ram and the water cooling so what would be the next board for me?
My System SpecsSystem Spec
Reply

 BSOD kernel 41 bugcheck 278




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on start, Startup Repair: Unknown Bugcheck: Bugcheck 3d
We've been getting a BSOD on one of our computers on startup recently. The exact message the BSOD gives varies but often mentions atapi.sys. Having done extensive research we've come to the conclusion that it could be a rootkit or it could be the fact that we have Daemon Tools installed on the...
BSOD Help and Support
BSOD source: Kernel-Power, bugcheck code 209
Hey, I was typing an assignment on microsoft word 2010 and then I got the BSOD; I'm not the best with computers so i'm not sure what to do.
BSOD Help and Support
BSOD - Kernel-power & Bugcheck - 0xc0000005 & 0x0000003b
I keep getting BSOD randomly from time to time and I got absolutely no idea why. I have tested my GPU with FurMark. I bought new DRAM few weeks ago. I have checked it with memtest and I just reinstalled my windows. What could be the problem? All my drivers are up to date and I am using MSE. My own...
BSOD Help and Support
Event 1001 BugCheck Event 41 Kernel-Power Event 4 k57nd60a
Alright, started getting the 1001 BugCheck crash with Event 41 Kernel-Power BSOD a few times not long ago, widely spaced out incidents (it will lock up, make a very weird repetitive noise through my stereo speakers and will also get black and white bars across the screen before the blue screen...
BSOD Help and Support
Unknown Bugcheck : Bugcheck c00002e3 - System is randomly Shutting OFF
T61 4GB Kingston T61 specific Ram 2.5GHz 6459CTO T9300 (965 Chipset) Fresh, Full licensed copy of Win 7 Ultimate loaded onto system, without issues. All device drivers from the Lenovo site have been loaded successfully without incident. Device Manager showing Zero issues.
BSOD Help and Support
The computer has rebooted from a bugcheck. The bugcheck was: 0x000000
Help me!... I dont know why this started to happen but happens somewhere between twice and three times per day. I attached my Memory.DMP file which is where it said the error was logged. To be specific this was my error. The computer has rebooted from a bugcheck. The bugcheck was:...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:39.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App