Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Shortly After Began Using New Build

30 Sep 2013   #11
slodoc259

Win 7 64 bit SP1
 
 

Bump for help.


My System SpecsSystem Spec
.
03 Oct 2013   #12
slodoc259

Win 7 64 bit SP1
 
 
Dump file posted

Good morning,

Posted the dump file about 4 days ago and wondered if someone would look at it.

Thanks.
My System SpecsSystem Spec
04 Oct 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi slodoc259. I did not post there as I wanted to avoid any chance of conflict of suggestions.

The BSOD is not showing any finite probable cause. Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
____________________________________________________________________
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa80c031f8a0, 2, 1, fffff800036ba150}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+c0 )

Followup: MachineOwner
---------

4: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffffa80c031f8a0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff800036ba150, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800038cc100
GetUlongFromAddress: unable to read from fffff800038cc1c0
 fffffa80c031f8a0 Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
nt!MiReplenishPageSlist+c0
fffff800`036ba150 f00fba6b1000    lock bts dword ptr [rbx+10h],0

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xA

PROCESS_NAME:  chrome.exe

TRAP_FRAME:  fffff8800d097350 -- (.trap 0xfffff8800d097350)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=000000000000000c
rdx=000000000cee9010 rsi=0000000000000000 rdi=0000000000000000
rip=00000000024caefc rsp=00000000003def70 rbp=00000000003def78
 r8=000000000000002b  r9=0000000074ee5758 r10=0000000000000000
r11=0000000000000246 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl nz na po nc
0023:024caefc ??              ???
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80003694129 to fffff80003694b80

STACK_TEXT:  
fffff880`0d096d88 fffff800`03694129 : 00000000`0000000a fffffa80`c031f8a0 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`0d096d90 fffff800`03692da0 : fffffa80`1160db50 00000000`00000000 00000000`02170000 fffffa80`c031f890 : nt!KiBugCheckDispatch+0x69
fffff880`0d096ed0 fffff800`036ba150 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260
fffff880`0d097060 fffff800`036b890f : fffffa80`0cbd0078 00000000`00000003 fffffa80`00321090 00000000`00000003 : nt!MiReplenishPageSlist+0xc0
fffff880`0d0970d0 fffff800`036a2044 : 00000000`00000000 00000000`00000002 00000000`00000000 ffffffff`ffffffff : nt!MiRemoveAnyPage+0x24f
fffff880`0d0971f0 fffff800`03692cae : 00000000`00000001 00000000`0cee9000 00000000`00000001 00000000`0c412d78 : nt!MmAccessFault+0x1224
fffff880`0d097350 00000000`024caefc : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
00000000`003def70 fffff800`0368c1d0 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x24caefc
fffff880`0d097530 00000000`ffffffff : fffff8a0`136d3810 fffff880`0d097900 fffff8a0`13182530 00000000`00000200 : nt!KiCallUserMode
fffff880`0d097538 fffff8a0`136d3810 : fffff880`0d097900 fffff8a0`13182530 00000000`00000200 fffff880`0d097c70 : 0xffffffff
fffff880`0d097540 fffff880`0d097900 : fffff8a0`13182530 00000000`00000200 fffff880`0d097c70 00000000`0000ffc0 : 0xfffff8a0`136d3810
fffff880`0d097548 fffff8a0`13182530 : 00000000`00000200 fffff880`0d097c70 00000000`0000ffc0 00000000`0000ffc0 : 0xfffff880`0d097900
fffff880`0d097550 00000000`00000200 : fffff880`0d097c70 00000000`0000ffc0 00000000`0000ffc0 414b7740`3ffffffa : 0xfffff8a0`13182530
fffff880`0d097558 fffff880`0d097c70 : 00000000`0000ffc0 00000000`0000ffc0 414b7740`3ffffffa 00000000`00000000 : 0x200
fffff880`0d097560 00000000`0000ffc0 : 00000000`0000ffc0 414b7740`3ffffffa 00000000`00000000 00000000`00000000 : 0xfffff880`0d097c70
fffff880`0d097568 00000000`0000ffc0 : 414b7740`3ffffffa 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffc0
fffff880`0d097570 414b7740`3ffffffa : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xffc0
fffff880`0d097578 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x414b7740`3ffffffa


STACK_COMMAND:  kb

FOLLOWUP_IP: 
nt!MiReplenishPageSlist+c0
fffff800`036ba150 f00fba6b1000    lock bts dword ptr [rbx+10h],0

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  nt!MiReplenishPageSlist+c0

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: nt

DEBUG_FLR_IMAGE_TIMESTAMP:  51fb06cd

IMAGE_NAME:  memory_corruption

FAILURE_BUCKET_ID:  X64_0xA_nt!MiReplenishPageSlist+c0

BUCKET_ID:  X64_0xA_nt!MiReplenishPageSlist+c0

Followup: MachineOwner
---------
My System SpecsSystem Spec
.

Reply

 BSOD Shortly After Began Using New Build




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD shortly after any boot up
No matter what I try to do within 2-3 minutes I get a BSOD. Here are my zipped up dump files:
BSOD Help and Support
BSOD shortly after logon
I am experiencing an occasional BSOD when booting the computer. This occurs shortly after logging on. A BSOD will flash very quickly so I can't really tell what's written. Then the system will reboot spontaneously, and then works fine thereafter. My previous installation (Win XP sp3 x86) also had a...
BSOD Help and Support
BSOD, Shortly after every login
Been having problems with the computer ever since getting on it today, and for most part been unable to use it. When I first got home and got on, I kept losing internet, even though another computer in the house still had internet. Tried to restart to resolve it, and since then I've had BSODs after...
BSOD Help and Support
BSOD on log in or shortly afterwards
Hi there, Suddenly today, and to the best of my knowledge without adding any new programs/hardware, windows began crashing to the BSOD. It usually happens about 1 minute after logging in although sometimes it is immediate and very rarely I can use the computer for about 20 minutes. I don't know...
BSOD Help and Support
It began, ended, and began again.
---> School. It began, ended, and began again. ---> Here, In Bulgaria, school starts 15th September. ---> Yes. 15th September is tomorrow. ---> I live in Bulgaria. ---> Tomorrow I start school. ---> I will be 7th grade. ---> I have to study hard. ---> I won't have much time for my PC. --->...
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App