Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD error 0x000000D1 after computer logs on

27 Sep 2013   #1
ShierB0ND007

Windows 7 Home Premium
 
 
BSOD error 0x000000D1 after computer logs on

Hello,

I've been experiencing random BSODs for about two weeks, this one in particular has occured several times.
I've updated all my drivers and fixed all the registry errors I could find. This stopped the BSODS for a week but they've returned with a vengeance. I've also removed one of my two 4GB ram cards because one is defective. I know that one card is defective because I tested both RAM cards using Memtest 86+. Attached are the appropriate files.

Thank you


My System SpecsSystem Spec
.
27 Sep 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi ShierB0ND007.

McAfee is one of the biggest individual Network related BSOD causer, and it is the same in your case, too.

Uninstall McAfee Using McAfee Removal Tool. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.
Download, install and update those, and then run full system scans with both of them, one by one, for a safety reason.

Let us know how it is running.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {0, 2, 0, fffff88001892572}

*** WARNING: Unable to verify timestamp for mfewfpk.sys
*** ERROR: Module load completed but symbols could not be loaded for mfewfpk.sys
Probably caused by : NETIO.SYS ( NETIO!NetioDereferenceNetBufferList+86 )

Followup: MachineOwner
---------
Description here: Driver Reference Table - mfewfpk.sys
My System SpecsSystem Spec
27 Sep 2013   #3
ShierB0ND007

Windows 7 Home Premium
 
 

I've done what you recommended. Removed about a hundred malware threats. Will let you know in a few days if the BSODs are gone for good.

Thank you.
My System SpecsSystem Spec
.

17 Oct 2013   #4
ShierB0ND007

Windows 7 Home Premium
 
 

Unfortunately I just received another BSOD 0x0000003B, here is the required file.
My System SpecsSystem Spec
18 Oct 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The zip you uploaded does not contain any crash dump.

Attachment 290205

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.
My System SpecsSystem Spec
18 Oct 2013   #6
ShierB0ND007

Windows 7 Home Premium
 
 

The dump is empty, I messed up on my end I'll just have to wait for the next BSOD thank you.
My System SpecsSystem Spec
12 Nov 2013   #7
ShierB0ND007

Windows 7 Home Premium
 
 

Okay so I got the exact same error message and this time I made sure that I've got the dump Attachment 293450
My System SpecsSystem Spec
13 Nov 2013   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Update your ATI/AMD display driver to the latest WHQL.
You can get it from the link in our forum, Latest AMD Catalyst Video Driver for Windows 7, or you may go to AMD Graphics Driver and Software and opt for Automatically Detect and Install the appropriate driver for your card.


During installation, you may opt for advanced installation, and install the display driver only, not the Catalyst Control Center.

Also update 802.11n Wireless LAN Card driver.

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Let us know the results.
________________________________________________________________________________________
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 3B, {c0000005, fffff8800169553b, fffff8800b5bf900, 0}

Probably caused by : NETIO.SYS ( NETIO!NetioDereferenceNetBufferListChain+132 )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff8800169553b, Address of the instruction which caused the bugcheck
Arg3: fffff8800b5bf900, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.

Debugging Details:
------------------


EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.

FAULTING_IP: 
tcpip! ?? ::FNODOBFM::`string'+57b4
fffff880`0169553b 488b01          mov     rax,qword ptr [rcx]

CONTEXT:  fffff8800b5bf900 -- (.cxr 0xfffff8800b5bf900)
rax=fffffa800829dba0 rbx=fffffa8009dbf030 rcx=0000000000000000
rdx=fffffa800829dba1 rsi=00000000fffffa9c rdi=fffffa800871c3d0
rip=fffff8800169553b rsp=fffff8800b5c02e0 rbp=0000000000000000
 r8=fffffa800829dba0  r9=00000000000000d0 r10=fffff80005057b80
r11=fffffa800871c490 r12=fffffa8009dbf030 r13=fffffa80094feba0
r14=0000000000000000 r15=0000000000000001
iopl=0         nv up ei ng nz na po nc
cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
tcpip! ?? ::FNODOBFM::`string'+0x57b4:
fffff880`0169553b 488b01          mov     rax,qword ptr [rcx] ds:002b:00000000`00000000=????????????????
Resetting default scope

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0x3B

PROCESS_NAME:  firefox.exe

CURRENT_IRQL:  0

LAST_CONTROL_TRANSFER:  from fffff88001192872 to fffff8800169553b

STACK_TEXT:  
fffff880`0b5c02e0 fffff880`01192872 : fffff880`0b5c0790 00000000`00000001 00000000`00000001 fffffa80`0a23e030 : tcpip! ?? ::FNODOBFM::`string'+0x57b4
fffff880`0b5c0330 fffff880`0167ee81 : 00000000`00000564 fffff880`048e5700 fffff880`0b5c0364 00000000`00000003 : NETIO!NetioDereferenceNetBufferListChain+0x132
fffff880`0b5c0400 fffff880`03eda47d : fffff880`0b5c0790 fffffa80`09dbf030 fffff880`0b5c0ca0 fffffa80`0a7c4300 : tcpip!TcpTlProviderReleaseIndicationList+0x81
fffff880`0b5c0430 fffff880`03f1b8a1 : fffff880`0b5c0970 fffff880`0b5c0790 fffff880`0b5c0790 fffffa80`0871c490 : afd!AfdTLReleaseIndications+0x2d
fffff880`0b5c0480 fffff880`03f037bb : 00000000`00000000 00000000`000007ff 00000000`00000000 00000000`00000000 : afd!AfdFastConnectionReceive+0x8d1
fffff880`0b5c06a0 fffff800`051f8113 : 00000000`00008000 fffffa80`0a3b42d0 00000000`0425f77c fffffa80`0a207101 : afd!AfdFastIoDeviceControl+0x7ab
fffff880`0b5c0a10 fffff800`051f8c06 : fffff880`0b5c0bf8 00000000`0000023c 00000000`00000001 00000000`00000000 : nt!IopXxxControlFile+0x373
fffff880`0b5c0b40 fffff800`04edae53 : fffff880`0b5c0ca0 fffffa80`072ac5e0 fffff880`0b5c0bf8 00000000`01f18401 : nt!NtDeviceIoControlFile+0x56
fffff880`0b5c0bb0 00000000`74e62e09 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`028decd8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x74e62e09


FOLLOWUP_IP: 
NETIO!NetioDereferenceNetBufferListChain+132
fffff880`01192872 4c8bb42490000000 mov     r14,qword ptr [rsp+90h]

SYMBOL_STACK_INDEX:  1

SYMBOL_NAME:  NETIO!NetioDereferenceNetBufferListChain+132

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: NETIO

IMAGE_NAME:  NETIO.SYS

DEBUG_FLR_IMAGE_TIMESTAMP:  5034f6a0

STACK_COMMAND:  .cxr 0xfffff8800b5bf900 ; kb

FAILURE_BUCKET_ID:  X64_0x3B_NETIO!NetioDereferenceNetBufferListChain+132

BUCKET_ID:  X64_0x3B_NETIO!NetioDereferenceNetBufferListChain+132

Followup: MachineOwner
---------
My System SpecsSystem Spec
Reply

 BSOD error 0x000000D1 after computer logs on




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD error 0x000000d1
Hello All, The Dell T1750 workstation is used for process control application. The software is TwinCat PLC v2.11. First, ethernet communication to I/O device stopped. Then, after attempting to restart PLC software BSOD occurred. I would appreciate any help to find the reason of the BSOD. ...
BSOD Help and Support
BSOD Error logs
I have had 5 BSOD's in the last two days. Where does Win 7 store the log files so that I can get some help figuring out what the problem is? Thanks for the help.
BSOD Help and Support
BSOD error 0x000000d1
Hello , Today i installed Win7 ulitimate. Exactly after instalation i got BSOD , then another after installing windows updates , nvidia and intel drivers .
BSOD Help and Support
BSOD when powering off computer, error 0x000000D1
Whenever I shut off my computer I get BSOD. I attached my SF file for viewing. Thanks in advance for the help. Marty
BSOD Help and Support
Computer Hard Freezes with No BSOD or Event Viewer Logs
Howdy everyone. I've got a problem with my computer hard freezing (locking up, no input, have to perform a hard reboot) since July 15th. It seems impossible for me to diagnose this problem since I've never dealt with a recurring hard freeze before. My initial reaction was that the hardware was...
BSOD Help and Support
BSOD error logs
I have had 3 BSOD's in the last week. Where does Win 7 store the log files so that I can get some help figuring out what the problem is?
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 12:56.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App