Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 3 BSOD in a row; New SSD, RAM and Video Card


01 Oct 2013   #1

Windows 7
 
 
3 BSOD in a row; New SSD, RAM and Video Card

I recently (last weekend) replaced my RAM, OS HDD and Video Card. Today is the first time I've experienced any problems but I've had three BSOD in a row. The first two were while watching videos in VLC and the third was while trying to post here. Attached is my system info from the sevenforums tool for the first 2 BSOD problems.




Attached Files
File Type: rar Bizarro181_SF_01-10-2013.rar (2.22 MB, 4 views)
My System SpecsSystem Spec
.

02 Oct 2013   #2

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Code:
BugCheck 24, {1904fb, fffff8800bf13ed8, fffff8800bf13730, fffff800038a1915}

Probably caused by : ntkrnlmp.exe ( nt!FsRtlLookupPerFileObjectContext+a5 )
Code:
Usual causes:  Disk corruption, insufficient physical memory, Device driver, Indexing, Resident antivirus, backup, defrag programs, Disk/Drive failing/failure
Code:
2: kd> .trap fffff8800bf13f80;knL
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=88fffa80105a8da8 rbx=0000000000000000 rcx=fffffa80508ba4b8
rdx=fffffa800abade70 rsi=0000000000000000 rdi=0000000000000000
rip=fffff800038a1915 rsp=fffff8800bf14110 rbp=0000000000000000
 r8=0000000000000000  r9=fffffa801fe53ac0 r10=fffffa800ab98b90
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po cy
nt!FsRtlLookupPerFileObjectContext+0xa5:
fffff800`038a1915 48395810        cmp     qword ptr [rax+10h],rbx ds:88fffa80`105a8db8=????????????????
  *** Stack trace for last set context - .thread/.cxr resets it
 # Child-SP          RetAddr           Call Site
00 fffff880`0bf14110 fffff880`012eab1f nt!FsRtlLookupPerFileObjectContext+0xa5
01 fffff880`0bf14150 fffff880`012e8852 fltmgr!FltpGetStartingCallbackNode+0x3f
02 fffff880`0bf141e0 fffff800`038a06a3 fltmgr!FltpPreFsFilterOperation+0xa2
03 fffff880`0bf14270 fffff800`03b56fe4 nt!FsFilterPerformCallbacks+0xd3
04 fffff880`0bf142d0 fffff800`038c2427 nt!FsRtlAcquireFileForCcFlushEx+0xd0
05 fffff880`0bf14570 fffff800`038c19bc nt!MmFlushSection+0x1c3
06 fffff880`0bf14630 fffff880`014dd654 nt!CcFlushCache+0x7bc
07 fffff880`0bf14730 fffff880`014d34cd Ntfs!NtfsFlushUserStream+0xb4
08 fffff880`0bf147b0 fffff880`014dbf48 Ntfs!NtfsFlushVolume+0x2ad
09 fffff880`0bf148e0 fffff880`014dc63c Ntfs!NtfsCommonFlushBuffers+0x444
0a fffff880`0bf149c0 fffff880`012e9bcf Ntfs!NtfsFsdFlushBuffers+0x104
0b fffff880`0bf14a30 fffff880`012e86df fltmgr!FltpLegacyProcessingAfterPreCallbacksCompleted+0x24f
0c fffff880`0bf14ac0 fffff800`03b8ba9b fltmgr!FltpDispatch+0xcf
0d fffff880`0bf14b20 fffff800`03b20781 nt!IopSynchronousServiceTail+0xfb
0e fffff880`0bf14b90 fffff800`0387fe13 nt!NtFlushBuffersFile+0x171
0f fffff880`0bf14c20 00000000`77c0176a nt!KiSystemServiceCopyEnd+0x13
10 00000000`0191f548 00000000`00000000 0x77c0176a
The last instruction which was called, and where the interrupt handler broke in to save the context of the thread, and then produce a bugcheck was FsRtlLookupPerFileObjectContext, which is used by filter drivers to receive the context of a previous file object; a file object can refer to an actual file or physical hard disk. The IRQL level is fine here, so no functions were being called at the incorrect IRQL level.

Code:
2: kd> !irql
Debugger saved IRQL for processor 0x2 -- 1 (APC_LEVEL)
For crashes involving filter drivers, it is usually related to anti-virus programs or programs which perform interaction with FSD drivers.

From another bugcheck (Stop 0x1E):

Code:
0: kd> lmvm sptd
start             end                 module name
fffff880`0108b000 fffff880`011fe000   sptd     T (no symbols)           
    Loaded symbol image file: sptd.sys
    Image path: sptd.sys
    Image name: sptd.sys
    Timestamp:        Sat Mar 03 16:45:52 2012 (4F524AC0)
    CheckSum:         0008CE54
    ImageSize:        00173000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Quote   Quote: Originally Posted by Arc View Post
Download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
  • Double click to open it.
  • Click this button only:
  • If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Daemon Tools uses a driver called sptd.sys, which is known to cause BSODs with Windows 7. It is recommend you remove this program, and use Windows own in-built features or ImgBurn.

Reduce the number of programs at startup, to avoid any driver or program conflicts:
My System SpecsSystem Spec
02 Oct 2013   #3

Windows 7
 
 

Hey BlueRobot,

Thanks. I uninstalled daemon tools as per your suggestion and used the SPTD installer to fully uninstall SPTD. I am confused as to if there is any action I should take with regards the first bugcheck. Currently I don't have an antivirus installed. I'm just running Windows Defender (Which is now having errors starting since the SPTD and Daemon tools uninstall...related?) and Microsoft Security Essentials.

Thanks
-Rob
My System SpecsSystem Spec
.


02 Oct 2013   #4

Windows 7 Pro. 64/SP-1
 
 

If you have installed Microsoft Security Essential for your anti virus it should of turned off the built in Defender.

Go to Start Orb and type in Defender and then tick on it. I should indicate it is turned off.
Have you completed all Windows Updates? This should be done.
My System SpecsSystem Spec
02 Oct 2013   #5

Windows 7
 
 

Quote   Quote: Originally Posted by Layback Bear View Post
If you have installed Microsoft Security Essential for your anti virus it should of turned off the built in Defender.

Go to Start Orb and type in Defender and then tick on it. I should indicate it is turned off.
Have you completed all Windows Updates? This should be done.
Ah, okay. It is turned off. For some reason it autostarted at my last reboot.

-Thanks
My System SpecsSystem Spec
04 Oct 2013   #6

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Any more problems?
My System SpecsSystem Spec
05 Oct 2013   #7

Windows 7
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Any more problems?
Hey, thanks for following up. Thinks looked to be going fine for a while but today I got another bluescreen, all the goods attached. I wasnt doing anything out of the ordinary, just web browsing and boom.

Anyway, I asked a friend and he seems to think that it's because I havent manually set the voltage and timing for my new RAM, but I've read that "Auto" settings are fine and the voltage and timing just effects the performance. Anyway, thanks.

Edit: mere moments after posting this I got another blue screen while shutting down my computer that said SYSTEM SERVICE EXCEPTION 0x0000003b

Another edit: Since my friend insisted, my RAM in now running at the recommended timings, voltage and frequency. So if that was indeed the problem, hopefully it wont be anymore


Attached Files
File Type: rar SF_05-10-2013.rar (2.29 MB, 1 views)
My System SpecsSystem Spec
06 Oct 2013   #8

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Okay, hopefully your system will remain stable, but I'll look at the dump file for your nonetheless.
My System SpecsSystem Spec
06 Oct 2013   #9

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium x86 Service Pack 1 - Linux Mint Mate 14 x64
 
 

Code:
BugCheck 1A, {5002, fffff70001080000, 3970, b003971fffffffe}

Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+2902c )
Code:
6: kd> !stack
Call Stack : 8 frames
## Stack-Pointer    Return-Address   Call-Site       
00 fffff88009eee798 fffff800038efd34 nt!KeBugCheckEx+0 
01 fffff88009eee7a0 fffff80003897ece nt!MiCompleteProtoPteFault+49e44 (perf)
02 fffff88009eee830 fffff800038a5d05 nt!MiResolveDemandZeroFault+93e 
03 fffff88009eee920 fffff800038a44f3 nt!MiResolveProtoPteFault+4f5 
04 fffff88009eee9b0 fffff80003894179 nt!MiDispatchFault+1c3 
05 fffff88009eeeac0 fffff80003885cae nt!MmAccessFault+359 <-- Demand Zero Fault?
06 fffff88009eeec20 000000006ec382ed nt!KiPageFault+16e
The subtype error of this bugcheck is not publicly documented by Microsoft, but looking at the call stack, I see regular maintenance going on. The most interesting frames are 2 and 3. Prototype PTES and PTEs are the same, apart from Prototype PTEs add a additional layer to address translation. So, from what has happened, a demand zero Prototype PTE was accessed, and then the Access Fault handler was executed to resolve this fault, by writing a page with 0's.

Do you have the latest WHQL version of your nVidia graphics card driver installed?
My System SpecsSystem Spec
06 Oct 2013   #10

Windows 7
 
 

Hey BlueRobot,

My nVidia drivers are current. I just ran the update check now and they are from 9/19/2013 and listed as 327.23 WHQL on the nividia site.

Thanks
-Rob
My System SpecsSystem Spec
Reply

 3 BSOD in a row; New SSD, RAM and Video Card




Thread Tools



Similar help and support threads for2: 3 BSOD in a row; New SSD, RAM and Video Card
Thread Forum
Solved bsod plz help not sure if its ram or video card BSOD Help and Support
Video card associated BSOD? BSOD Help and Support
Solved bsod video scheduler and attempt to reset video card BSOD Help and Support
BSOD with new video card BSOD Help and Support
Video Card BSOD?? BSOD Help and Support
BSOD New Video Card/s BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:38 PM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33