Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Kernel-power 41

03 Oct 2013   #1
Analog Kid

Windows 7 Home Premium 64bit
 
 
BSOD Kernel-power 41

Had BSOD with Kernel-power 41 in the Event log. Info on the .rar file.


My System SpecsSystem Spec
.
03 Oct 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please follow this post: Another BSOD ntoskrnl.exe
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {80, 2, 0, fffff88002aad13e}

*** WARNING: Unable to verify timestamp for cm11264.sys
*** ERROR: Module load completed but symbols could not be loaded for cm11264.sys
Probably caused by : cm11264.sys ( cm11264+8613e )

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000080, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88002aad13e, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff8000310b100
GetUlongFromAddress: unable to read from fffff8000310b1c0
 0000000000000080 Nonpaged pool

CURRENT_IRQL:  2

FAULTING_IP: 
cm11264+8613e
fffff880`02aad13e 49ffcb          dec     r11

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  bf4.exe

TAG_NOT_DEFINED_c000000f:  FFFFF800048F7FB0

TRAP_FRAME:  fffff800048f72a0 -- (.trap 0xfffff800048f72a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000080 rbx=0000000000000000 rcx=fffffa800d779494
rdx=fffffa800d80dd20 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002aad13e rsp=fffff800048f7430 rbp=fffffa800d77b0b0
 r8=0000000000000080  r9=0000000000000080 r10=fffffa800d80dd4c
r11=000000000000001f r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na pe nc
cm11264+0x8613e:
fffff880`02aad13e 49ffcb          dec     r11
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002ed3129 to fffff80002ed3b80

STACK_TEXT:  
fffff800`048f7158 fffff800`02ed3129 : 00000000`0000000a 00000000`00000080 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff800`048f7160 fffff800`02ed1da0 : fffffa80`0d80d720 fffffa80`0d80dd20 fffffa80`0d80f020 00000000`000948b0 : nt!KiBugCheckDispatch+0x69
fffff800`048f72a0 fffff880`02aad13e : 00000000`00000000 00000000`00000000 fffff800`048f74e0 fffffa80`0d77b0b0 : nt!KiPageFault+0x260
fffff800`048f7430 00000000`00000000 : 00000000`00000000 fffff800`048f74e0 fffffa80`0d77b0b0 fffffa80`0d7ed810 : cm11264+0x8613e


STACK_COMMAND:  kb

FOLLOWUP_IP: 
cm11264+8613e
fffff880`02aad13e 49ffcb          dec     r11

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  cm11264+8613e

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: cm11264

IMAGE_NAME:  cm11264.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4e535a4d

FAILURE_BUCKET_ID:  X64_0xD1_cm11264+8613e

BUCKET_ID:  X64_0xD1_cm11264+8613e

Followup: MachineOwner
---------

0: kd> lmvm cm11264
start             end                 module name
fffff880`02a27000 fffff880`02bb2000   cm11264  T (no symbols)           
    Loaded symbol image file: cm11264.sys
    Image path: \SystemRoot\system32\drivers\cm11264.sys
    Image name: cm11264.sys
    Timestamp:        Tue Aug 23 13:44:13 2011 (4E535A4D)
    CheckSum:         0013F60A
    ImageSize:        0018B000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Please run these tests and report back the results
------------------------
1. SFC /scannow to check windows for corruption - SFC /SCANNOW - System File Checker
2. Disk check for errors on the hard drive - Run Disk Check in Windows 7
3. Troubleshoot apps by a clean boot - Performing a Clean Startup
4. Memtest86+ paying attention to part 3 - RAM - Test with Memtest86+
5. Hard drive test from HDD mfg website - Hard Drive Diagnostic Procedure
My System SpecsSystem Spec
Reply

 BSOD Kernel-power 41




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Kernel-Power 41 (63)
I need help in fixing my computer's recent BSOD. They happen randomly so i don't know what triggers it. It has been occurring for about two months now.
BSOD Help and Support
BSOD Kernel Power id 41
- System - Provider Name] Microsoft-Windows-Kernel-Power Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4} EventID 41 Version 2 Level 1 Task 63 Opcode 0 Keywords 0x8000000000000002 - TimeCreated SystemTime] 2013-09-27T00:10:44.220415300Z EventRecordID...
BSOD Help and Support
Kernel-Power 41 BSOD -.- Help please!
Hey so I've been randomly getting this Kernel-Power 41 error, i can't figure out whats causing it, and I don't really know what i am doing. My system specs are: Windows 7 Home Premium 64bit(6.1, Build 7601) AMD Phenom(tm II X6 1090T Processor 8GIGS RAM NVIDIA GeForce GTX 470 Addition...
BSOD Help and Support
Kernel-Power BSoD
Hi, I've formatted my pc a few time over the last couple months but after the last time I have had two BSoDs. One happened while I was using XBMC and the other happened last night while I was updating my BFBC2 game, the two are about a week apart. *Critical Kernel-Power Event ID 41 Task...
BSOD Help and Support
BSOD/kernel power 41
Hello there i will cut to the chase...I bought a new custom build pc last week and from that time i am always getting the same errors/bsod.Its really random usually it crashes when i am opening the browser or not even doing a thing just being on dekstop please help me its really frustrating. this...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:53.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App