Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD mbfilt64.sys (MBfilt64+0x1817)

05 Oct 2013   #1
Newboi

Windows 7 Home Premium x64
 
 
BSOD mbfilt64.sys (MBfilt64+0x1817)

crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: mbfilt64.sys (MBfilt64+0x1817)
Bugcheck code: 0xA (0x0, 0x2, 0x0, 0xFFFFF800030D8325)
Error: IRQL_NOT_LESS_OR_EQUAL
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: mbfilt64.sys .
Google query: mbfilt64.sys IRQL_NOT_LESS_OR_EQUAL


I've been running into occasional BSODs with more intensely graphical games and haven't been able to come to a solid conclusion on what exactly is wrong. This error came from running windows built in driver verifier tool for about an 1 hour.

My BSODs mainly pop up when I have SLI enabled and am running a high-end game. Each card appears to work fine and benchmark well on their own though.


My System SpecsSystem Spec
.
05 Oct 2013   #2
YoYo155

Windows 10
 
 

Hello and welcome .

Driver verifier has caught a handful of drivers:
Please update the drivers or remove if not in use.
Code:
lmvm FNETTBOH_305
start             end                 module name
fffff880`065d1000 fffff880`065de000   FNETTBOH_305 T (no symbols)           
    Loaded symbol image file: FNETTBOH_305.SYS
    Image path: \SystemRoot\System32\drivers\FNETTBOH_305.SYS
    Image name: FNETTBOH_305.SYS
    Timestamp:        Fri May 13 08:09:28 2011 (4DCCBD08)
    CheckSum:         0000CF94
    ImageSize:        0000D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
lmvm iusb3hub
start             end                 module name
fffff880`06547000 fffff880`065a4000   iusb3hub T (no symbols)           
    Loaded symbol image file: iusb3hub.sys
    Image path: \SystemRoot\system32\DRIVERS\iusb3hub.sys
    Image name: iusb3hub.sys
    Timestamp:        Mon Feb 27 12:56:50 2012 (4F4B6172)
    CheckSum:         0005A7DB
    ImageSize:        0005D000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4


Code:
lmvm MBfilt64
start             end                 module name
fffff880`06d5b000 fffff880`06d69000   MBfilt64 T (no symbols)           
    Loaded symbol image file: MBfilt64.sys
    Image path: \SystemRoot\system32\drivers\MBfilt64.sys
    Image name: MBfilt64.sys
    Timestamp:        Fri Jul 31 06:40:32 2009 (4A7267B0)
    CheckSum:         0000FF02
    ImageSize:        0000E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Code:
lmvm ISCTD64
start             end                 module name
fffff880`0542b000 fffff880`0543c000   ISCTD64  T (no symbols)           
    Loaded symbol image file: ISCTD64.sys
    Image path: \SystemRoot\system32\DRIVERS\ISCTD64.sys
    Image name: ISCTD64.sys
    Timestamp:        Tue Nov 27 21:52:34 2012 (50B51A02)
    CheckSum:         00016374
    ImageSize:        00011000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4


Code:
lmvm MijXfilt
start             end                 module name
fffff880`07b65000 fffff880`07b87000   MijXfilt T (no symbols)           
    Loaded symbol image file: MijXfilt.sys
    Image path: \SystemRoot\system32\DRIVERS\MijXfilt.sys
    Image name: MijXfilt.sys
    Timestamp:        Sat May 12 07:27:12 2012 (4FADE6A0)
    CheckSum:         00022009
    ImageSize:        00022000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4


Please remove Avast Anti-Virus as it was involved in several bugchecks.


I'm a bit worried about this stack;
Code:
2: kd> k
Child-SP          RetAddr           Call Site
fffff880`0c425218 fffff800`030dc129 nt!KeBugCheckEx
fffff880`0c425220 fffff800`030dada0 nt!KiBugCheckDispatch+0x69
fffff880`0c425360 fffff880`01a839a0 nt!KiPageFault+0x260
fffff880`0c4254f0 fffff880`01a81bf8 tcpip!memcmp+0x90
fffff880`0c4254f8 fffff880`0198c312 tcpip!IpGetAllInterfaceParameters+0x88
fffff880`0c425578 00000000`018ff040 NETIO!NsiGetParameterEx+0x386
fffff880`0c4256c8 fffffa80`0d52b840 0x18ff040
fffff880`0c4256d0 00000000`00000000 0xfffffa80`0d52b840
That looks suspicious to me, as I couldn't unassemble backwards the return address
I can't look further into it.


Code:
ub 00000000`018ff040
          ^ Unable to find valid previous instruction for 'ub 00000000`018ff040'
I suggest scanning for infections:


The most predominant driver in the dumps is ScpVBus.sys
Code:
lmvm ScpVBus
start             end                 module name
fffff880`05ae5000 fffff880`05af3000   ScpVBus  T (no symbols)           
    Loaded symbol image file: ScpVBus.sys
    Image path: \SystemRoot\system32\DRIVERS\ScpVBus.sys
    Image name: ScpVBus.sys
    Timestamp:        Mon May 06 00:31:26 2013 (5186CFAE)
    CheckSum:         0000E3B0
    ImageSize:        0000E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
I wasn't able to find anything reliable online regarding the origin of the driver
but I can see it's location in your PC, can you shed some light?


Code:
c:\users\markus\downloads\scpserver\
Now as for the SLI issues,

What is the make an model of you PSU?
Fill out this form and post back the result:
Good practice, open up the case and re-seat all types of connection.
  • SATA Cables (HDD/SSD/ODD).
  • SATA-Power.
  • Motherboard 24-pin.
  • Motherboard 4/8-pin (CPU).
  • Re-seat the RAM.
  • Re-seat the GPU.
Make sure that every slot / cable head is free of dust or other obstruction.
Make sure that every connection is seating properly and firmly in-place.
  • Download Speccy and post a Screenshot of the summary window, one at idle and another while putting load on the PC using Prime95 for the CPU side and Furmark for the GPU.

Post back with the results .
My System SpecsSystem Spec
05 Oct 2013   #3
Newboi

Windows 7 Home Premium x64
 
 

The make and model of my PSU is the PC Power & Cooling Silencer Mk II 750w unit. Here's what I got from the survey you told me to fill out:

System Type: 1 physical CPU
Motherboard: Regular - Desktop
CPU Socket: Socket LGA 1155
CPU: Intel Core i7-3770K 3500 MHz Ivy Bridge
Overclocked: 4400 MHz, 1.65 V
CPU Utilization (TDP): 90% TDP
RAM: 4 Sticks DDR3 SDRAM
Video Card 1: NVIDIA GeForce GTX 670
Video Card 2: NVIDIA GeForce GTX 670
Video Type: SLI

Flash SSD: 1 Drive
DVD-RW/DVD+RW Drive: 1 Drive
USB: 5 Devices
Fan Controller: Yes
Fans
Regular: 3 Fans 120mm;
Keyboard and mouse: Yes
System Load: 90 %

Minimum PSU Wattage: 508 Watts
Recommended Wattage: 558 Watts

I'll post back when I've done the other steps you've described above.

Edit: By the way, the ScpServer is used in place of motion joy to make my Dualshock 3 look like an Xbox360 controller.

It was developed by a neogaf member I believe. Here's a link that talks about it:

http://www.neogaf.com/forum/showthread.php?p=59385385
My System SpecsSystem Spec
.

05 Oct 2013   #4
YoYo155

Windows 10
 
 

Thanks for the update .

Quote   Quote: Originally Posted by Newboi View Post
CPU: Intel Core i7-3770K 3500 MHz Ivy Bridge
Overclocked: 4400 MHz, 1.65 V
CPU Utilization (TDP): 90% TDP
!
Has the motherboard melted yet?
That is insanely high and not necessary for a 4.4 overclock.
What is your cooling solution?
My System SpecsSystem Spec
05 Oct 2013   #5
Newboi

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by YoYo155 View Post
Thanks for the update .

Quote   Quote: Originally Posted by Newboi View Post
CPU: Intel Core i7-3770K 3500 MHz Ivy Bridge
Overclocked: 4400 MHz, 1.65 V
CPU Utilization (TDP): 90% TDP
!
Has the motherboard melted yet?
That is insanely high and not necessary for a 4.4 overclock.
What is your cooling solution?
Oh sorry, that's completely wrong. That's supposed to be 1.065 volts lol.

My cooling solution is a Coolmaster V8

Cooler Master: V8

Edit: I can't find any traces of XFast or MotionJoy as I uninstalled them earlier in the year. I updated my USB3 drivers and just uninstalled intel smart connect.

I also ran TDS Killer and it came up clean. I'm currently running a FULL scan using Microsoft Security Essentials. Lastly, I uninstalled avast in safe mode using the awsclear prior to this.

Edit2: The full scan is going to take awhile. I'll run the Prime95 and Furmark concurrent test afterwards. I've attached a snapshot of my Idle Speccy Summary.
My System SpecsSystem Spec
05 Oct 2013   #6
YoYo155

Windows 10
 
 

Oh ok that is more reasonable than 1.65v but is pretty low for 4.4GHz OC, what is boost LLC?

Now usually I ask the OP (in this case you) to revert all clocks back to stock untill the issue is solved
or there is no point in diagnosing a fundamentally unstable machine.
Can you perhaps convince me as to why your OC isn't possibly part of the issue?
My System SpecsSystem Spec
05 Oct 2013   #7
Newboi

Windows 7 Home Premium x64
 
 

Quote   Quote: Originally Posted by YoYo155 View Post
Oh ok that is more reasonable than 1.65v but is pretty low for 4.4GHz OC, what is boost LLC?

Now usually I ask the OP (in this case you) to revert all clocks back to stock untill the issue is solved
or there is no point in diagnosing a fundamentally unstable machine.
Can you perhaps convince me as to why your OC isn't possibly part of the issue?
I've run CPU burn in tests for several hours with no problems on the OC multiple times:

Download IntelBurnTest - MajorGeeks

I've also run into the blue screens without the processor being overclocked. My blue screens have only been happening frequently since I've started to SLI two GTX670s. It's mainly when I play Crysis 3, if it doesn't just exit itself after 30 minutes), or my modded Skryim with a massive amount of High-res textures. I usually get DRIVER_IRQL_NOT_LESS_OR_EQUAL. 3DMark on Extreme fireStrike for multiple runs, Metro Last Light Benchmark for multiple runs, or Furmark xtreme burn-ins don't BSOD however.

I'll disable my overclock though.
My System SpecsSystem Spec
05 Oct 2013   #8
Newboi

Windows 7 Home Premium x64
 
 
Prime95 + FurMark Speccy Summary

Here are my Prime95 + Furmark Speccy Summary Images.

Furmark was run at Xtreme User settings + PostFX at 7680 x 1440 at 8x MSAA.

For Prime95, I was running the mixed mode. Both Prime95 and Furmark were run at the same time for both screenshots.

I also ran a full system scan with MS Security Essentials and came up clean
My System SpecsSystem Spec
06 Oct 2013   #9
YoYo155

Windows 10
 
 

Hi thanks for the update .

Quote   Quote: Originally Posted by Newboi View Post
I've run CPU burn in tests for several hours with no problems on the OC multiple times:

Download IntelBurnTest - MajorGeeks

I've also run into the blue screens without the processor being overclocked. My blue screens have only been happening frequently since I've started to SLI two GTX670s. It's mainly when I play Crysis 3, if it doesn't just exit itself after 30 minutes), or my modded Skryim with a massive amount of High-res textures. I usually get DRIVER_IRQL_NOT_LESS_OR_EQUAL. 3DMark on Extreme fireStrike for multiple runs, Metro Last Light Benchmark for multiple runs, or Furmark xtreme burn-ins don't BSOD however.

I'll disable my overclock though.
Were those still occurring after completing the steps suggested in post #2?
Are those still happening with the clocks back to stock?


Quote   Quote: Originally Posted by Newboi View Post
Here are my Prime95 + Furmark Speccy Summary Images.

Furmark was run at Xtreme User settings + PostFX at 7680 x 1440 at 8x MSAA.

For Prime95, I was running the mixed mode. Both Prime95 and Furmark were run at the same time for both screenshots.

I also ran a full system scan with MS Security Essentials and came up clean
Thanks the temperatures are looking good, but I have to wonder what temperatures are
you hitting with the overclock enabled?



After all of the above have you had any crashes?
My System SpecsSystem Spec
06 Oct 2013   #10
Newboi

Windows 7 Home Premium x64
 
 

I haven't ran into a bluescreen again yet, but I still have the issue where Some of my high end games spontaneously exits. I assume if I increase the tdrDelay to prevent windows from resetting my graphics driver, my computer would probably still bluescreen.

This has happened across several driver updates for my geforce cards, even after doing driver cleaner and installing completely fresh updated drivers.

I've run Memtest86+ multiple times for my ram and that checks out fine, so I've pretty much ruled out my ram. I just want to find a way to isolate whether the problems I have are definitely a driver issue or a hardware issue. If it's a hardware issue, how I can isolate the problem. I tried running burn-in tests on each card individually, but I haven't gotten any issues to arise yet.
My System SpecsSystem Spec
Reply

 BSOD mbfilt64.sys (MBfilt64+0x1817)




Thread Tools Search this Thread
Search this Thread:

Advanced Search



Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:43.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App