Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD after enabling driver verifier

15 Oct 2013   #1
Cop

W7 Home Premium x64
 
 
BSOD after enabling driver verifier

Hi, so since my computer was randomly freezing up for no apparent reason, I did some research and enabled driver verifier which then led me to a BSOD instead of just freezing (which I believe is the effect I want to achieve). In any case, I got a dump file and I have no idea how to analyze it. Attached is the complete SF-Diagnostic archive. Any help is appreciated.


My System SpecsSystem Spec
.
16 Oct 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Hi.

Please disable verifier as it has not provided any information to us.

Remove:
Code:
Start Menu\Programs\Norton Internet Security	Public:Start Menu\Programs\Norton Internet Security	Public
Start Menu\Programs\Sandboxie	Public:Start Menu\Programs\Sandboxie	Public
Norton Internet Security & Sandboxie for testing purpose. You can put it back after troubleshooting is done.


Then please follow the steps below:
Quote:
Based on the bugchecks, I would recommend you follow and complete the steps given below:
1. If you are overclocking any hardware, please stop. Reset any changed values back to default and reset/clear CMOS: Clear CMOS - 3 Ways to Clear the CMOS - Reset BIOS. Uninstall any overclocking tool as these can also be a reason of blue screens.

2. Uninstall your current antivirus software. It can be a cause of BSOD very often. Please remove it with its removal tool and use Microsoft Security Essentials in its place. Malwarebytes is a great combination with it. Go through this thread for more info.

3. Run Disk Check with both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log

4. Run SFC /SCANNOW Command - System File Checker to check windows for integrity violations. Run it up to three times to fix all errors. Post back if it continues to show errors after a fourth run or if the first run comes back with no integrity violations.

5. Make scans with Kaspersky TDSskiller and ESET Online scanner.

6. Perform a Clean Start up, this will help avoid any problematic applications from bugging the system.

7. Use Revo Uninstaller Free to uninstall stubborn software. Opt for Advanced Mode and uninstall the software, delete the leftover registry entries.

8. Use Crystal Disk Info to upload a screenshot of your Hard Drives (s). Test your Hard Drives (s) running a Hard Drive Diag.

9. Test and Diagnose RAM issues with RAM - Test with Memtest86+. Pay close attention to Part 3 of the tutorial "If you have errors" Take the test for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

10. Monitor hardware temperature for overheating issues with system monitoring software like Speccy or HWMonitor. Upload a screen shot of the Summary tab as well:
My System SpecsSystem Spec
Reply

 BSOD after enabling driver verifier




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Multiple BSOD. Driver Verifier Driver caught a driver corrupting
I have had BSOD for a while and being super busy I did not have time to look at it and get it fixed. Well Being a computer guy I assumed I could fix it myself. But with tons of research and trying to use every guide I can find I decided to try here(probably should have came here first). Today I...
BSOD Help and Support
BSOD while enabling Driver Verifier/DRIVER_POWER_STATE_FAILURE problem
So i enabled Driver Verifier and got a BSOD. I disabled it and looked at another post from November regarding ScpVBus.sys. I had the exact same BSOD for the exact same reason. If you are looking at this Arc you know what im talking about ScpVBus is Scarlet.Crush Productions SCP Driver. (It tricks...
BSOD Help and Support
BSOD 0x0000000A After enabling driver verifier, cannot boot windows
Hi running Windows 7 64 bit home premium. Enabled driver verifier as I was getting BSOD, cannot boot into Windows because of the STOP error 0x0000000A IRQL not less or equal, have loaded system defaults and still no joy. AMD 1090T X6 with 8GB 2x4Gb of crucial tactical tracer elite RAM SPD at...
BSOD Help and Support
BSOD after driver verifier
Plz check, thanks for more infos.... It's ntoskrnl.exe Searching forum and no proper solution. Startup repair doesn't help - can't fix the problem sfc /scann... no errors chkdsk /r ... no errors
BSOD Help and Support
Driver verifier BSOD
System will randomly lockup. It is very sporadic and I have tested vga, ram, and cpu using prime95, memtest as well as memtest86, furmark used for vga. 7hrs and 7 full runs of memtest 86, 0 errors. I feel hardware is solid. Upon enabling driver verifier the system bluescreens before even...
BSOD Help and Support
BSOD with Driver Verifier
I was getting some BSODs and I found out that it was due to my Lycosa Keyboard. But even after removing keyboard I am getting BSODs. My RAM is good (Memtest Pass for 8 hours). My hard disk is good. I reisntalled OS and installed just main drivers- 1. Intel Rapid Storage Technology 2. Nvidia...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 13:14.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App