Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: New PC - BSOD installing - Ntoskrnl.exe+cca3a

18 Oct 2013   #11
amd62

Windows 7 64bit Home Premium
 
 

Quote   Quote: Originally Posted by YoYo155 View Post
Edit:
I didn't see "EDIT2" as it was posted as I was posting mine.
Flashing the BIOS should be done while the default settings are loaded for the current BIOS
to avoid any complications that might occur.
Flashing the BIOS will reset back to default that is until AI Suite 3 will reapply the settings.

Quote   Quote: Originally Posted by amd62 View Post
Will try and clear asap. Will write back

I cannot get AI suite to stop ocing the CPU . tried changing a few settings. Ended up with the installer causing a freeze and no bsod
First uninstall the Asus utilities:
Code:
ASUS\AI Suite 3
ASUS\MemTweakIt
Then reset the UEFI (BIOS) back to it's defaults.
Note   Note
Write down the current value of the SATA Mode!
Its either AHCI or IDE.
After resetting the CMOS go back and verify the value for SATA Mode is what it was
when the OS was installed.

By clicking on the EXIT in the top right corner and choosing Load Optimized Defaults.

Attachment 290308

Or
by following the methods described in the link below, either way take note of the SATA Mode!




Quote   Quote: Originally Posted by amd62 View Post
The thing im worried about is it being a hardware fail. Software can be fixed but hardware ill ned to RMa and it NEEDS to be asap in my country thats why im worried
I understand I simply stated what it means and an unstable overclock falls into that category
so no need to over complicate the subject at this time .
I did following:

Flashed to bios 404 from 403, flawlessly

Rebooted and uninstalled Memtweakit and Ai Suite - Dual Intelligent Processors 4 with 4-Way Optimization

Shut down pc - Pressed Clear Cmos on the back of the board.

Pc booted into UEFI, I choosed to ''load optimized defaults'' and saved. Note: The ''target'' cpu speed was still 3800mhz? is this normal??, basicly all the difference i saw with the Uefi changes was my ram going from 1866mhz to the Spd 1333mhz

Testet again, same error, Screen froze and needed to manually power down. No BSOD so no info


My System SpecsSystem Spec
.
18 Oct 2013   #12
YoYo155

Windows 10
 
 

Ok can you please post a picture of your disk management?

My System SpecsSystem Spec
18 Oct 2013   #13
amd62

Windows 7 64bit Home Premium
 
 

Attachment 290318
Quote   Quote: Originally Posted by YoYo155 View Post
Ok can you please post a picture of your disk management?

Forgive me for the drive names, they were made some years ago.

EDIT: if anything needs translation, just write and ill do
My System SpecsSystem Spec
.

18 Oct 2013   #14
amd62

Windows 7 64bit Home Premium
 
 

Tried running sfc /scannow multiple times, came up with nothing

Praying its not a hardware problem
My System SpecsSystem Spec
18 Oct 2013   #15
YoYo155

Windows 10
 
 

Thanks .
Just to clarify, the freeze only happens when you are trying to install that particular software?
Please remove IRST as it was active in one of the stacks and usually caused
more issues then benefits.
Quote   Quote: Originally Posted by Arc
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Then try again.
My System SpecsSystem Spec
18 Oct 2013   #16
amd62

Windows 7 64bit Home Premium
 
 

Quote   Quote: Originally Posted by YoYo155 View Post
Thanks .
Just to clarify, the freeze only happens when you are trying to install that particular software?
Please remove IRST as it was active in one of the stacks and usually caused
more issues then benefits.
Quote   Quote: Originally Posted by Arc
Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features.
Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Then try again.
As of now its the only program doing it, Keeping in mind the pc has only been running for around 16 hrs total

Will do, once sec

EDIT: Should i also uninstall IRST ? (the program, not driver)

EDIT: Removed the Ide ata/atapi controller driver, rebooted twice, it just installed same intel driver So im going to uninstall IRST and try it all again,

EDIT3: Removed IRST program and driver, rebooted multiple times, came up with some non-intel drivers. testing now.

EDIT4: AAAAAAAAAAAAAAAAAAAAAAH... another freeze, no bsod I would REALLY appreciate if you could somehow test the file..

I sent the file to Anubis.iseclab, tbh i suspect it will come up with nothing since it only opens the program and doesnt proceed, but im kinda desperate.. Ill post if it comes up with anything interesting
My System SpecsSystem Spec
18 Oct 2013   #17
amd62

Windows 7 64bit Home Premium
 
 

Anubis - Analysis Report

I dont think at all its the reason, but im asking anyway.. It says in the report under ''- Device Control Communication:'' that it communicates with cdrom, i do not have a cdrom installed. could this have anything to do with it?

EDIT: went through device manager and removed all old drivers from Cdrom (i used one to install win 7)

I looked around these temperarely files from the installer and found some clues.. could it be possible that the Av-trial installer is for a 32bit os ? anyway to check this?

EDIT2: Testet again after removing cdrom drivers.. same freeze no bsod

Interestingly it always freezes when it has Scanned 1% and Downloaded 3%

EDIT3: Testet the file. it is indeed 32bit, could this be the cause?
My System SpecsSystem Spec
19 Oct 2013   #18
amd62

Windows 7 64bit Home Premium
 
 

bump
My System SpecsSystem Spec
19 Oct 2013   #19
amd62

Windows 7 64bit Home Premium
 
 

any1? :S
My System SpecsSystem Spec
19 Oct 2013   #20
amd62

Windows 7 64bit Home Premium
 
 

testet with LoL it beasts on best quality 1080p no problems at all
My System SpecsSystem Spec
Reply

 New PC - BSOD installing - Ntoskrnl.exe+cca3a




Thread Tools




Similar help and support threads
Thread Forum
BSOD after installing fresh windows, caused by what seem ntoskrnl.exe
so i was reading up on it, and it was saying that a short in my keyboard could be the problem? so far it seems to be the same bug check code. and bug check string, but im not sure what to do with this information? i've attached all my information.
BSOD Help and Support
BSOD When Installing things ntoskrnl.exe error
I honestly don't know much about computers. Probably wasn't the best idea to build my own but i did and everything worked alright until I started to try to install games like League of Legends and Starcraft. After i installed those or part way thru installation my computer crashed,multiple times in...
BSOD Help and Support
BSOD error - ntoskrnl.exe+cca3a / BCP1: 0000000000000031
Hello guys this is my first time posting here but I've posted on the site I bought my PC from and one of the guys directed me here because everything that we have tried hasn't seemed to have worked. My computer first started doing this a couple of weeks ago first it started doing random blue...
BSOD Help and Support
BSOD while installing Star Citizen IRQL_NOT_LESS_OR_EQUAL ntoskrnl.exe
I have come here quite often to figure out problems, but this the first time I've needed to create a profile to seek help. As the title states this issue has only happened while Star Citizen is updating and applying patches. I've recreated the issue twice. I ran sfc /scannow three times which...
BSOD Help and Support
BSOD after installing Max Payne 3, ntoskrnl.exe+f11e4, 0x00000050
Hey guys, It's been a long time since I've last posted here. Anyway, I came back to ask for solutions with regards to the problem I'm currently experiencing. Last night, after installing Max Payne 3 on my C:\ drive (146 GB capacity, 15-20% free space after install), I was about to close a few...
BSOD Help and Support
BSOD when installing/downloading, ntoskrnl.exe errors
Hey everyone. Having some issues with BSODs, generally when I'm downloading games such as League of Legends (using the Pando Media Booster program to do so), when I install/download games through Steam, and even just when I leave the computer on long enough for it to go on standby. While there are...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:08.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App