Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Randomly, OBJECT CRITICAL_OBJECT_TERMINATION

28 Oct 2013   #11
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Make sure you run it for 9-10 passes, it should take all day or night, especially with 8GB of RAM.
Okay, So I just ran Memtest for about 14 hours, with 11 tests and 0 errors. Here is the picture, I'm sure you can understand it better than me. I'm running out of ideas now T.T I think I broke the record of re-installing windows, and re installing drivers all over again on the reinstalled windows from disk or from radeon website
. I have installed windows from usb, from iso burned disks, and from windows 7 original disk. I've reinstalled all updates and have reinstalled, gone back to restore points, back to back. Please help me, this has been like this for 1+ months and I haven't been able to enjoy my computer at all. I constantly worry if it will crash or not, you don't know what a nightmare that is. D:

edit: had to flip image
edit 2: also, all my componets are either below 35 or bellow 50 at all times. I will not allow it to go above those temperatures. Only, and only maybe when I'm gaming I will let that be 60. I want this desktop to last and I know keeping it at cool temperatures will prolong it's lifetime.


My System SpecsSystem Spec
.
29 Oct 2013   #12
x BlueRobot

 

There doesn't seem to be anything wrong with your RAM, but from the dump file previously, we know that the object couldn't be paged into memory due to a I/O error.

Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
My System SpecsSystem Spec
29 Oct 2013   #13
osmeus

New York
 
 

I cant do that. Today I tried to play a game and I get a black screen. I try to turn it on and it's just black. It turns on, I hear the fans power on and then they slow down, the harddrive makes noise and it powers off. But the mouse lights are on, the keyboards isn't. Do you think it might be the CPU? Hereis a picture. Everything isoff btw. I tried this a couple of times and still nothing. Just the mouse light stays on.

edit: do you think it might be the PSU* not cpu
My System SpecsSystem Spec
.

30 Oct 2013   #14
x BlueRobot

 

Let's test the possibility of the PSU, boot into BIOS and then post the voltages for the 3.3V, 5V and 12V rails.
My System SpecsSystem Spec
31 Oct 2013   #15
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Let's test the possibility of the PSU, boot into BIOS and then post the voltages for the 3.3V, 5V and 12V rails.
Hi tree I appreciate all your help sorry I haven't been consistent with my replies I sit have enough time work study etc. but here is a picture: of the voltages. I had to remove the gpu because the bios resolution doesn't fit with the gpu on. Idk why, maybe because of old plasma.
My System SpecsSystem Spec
01 Nov 2013   #16
x BlueRobot

 

Your voltages seem to be normal, I'm just trying to work out what caused the I/O error, I'm thinking there may be a problem with drivers interacting with the I/O Manager.

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:
information   Information

Select Individual Settings option, and then enable all the settings, apart from Low Resources Simulation.
My System SpecsSystem Spec
02 Nov 2013   #17
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Your voltages seem to be normal, I'm just trying to work out what caused the I/O error, I'm thinking there may be a problem with drivers interacting with the I/O Manager.

Run Driver Verifier to scan for any corrupted drivers which may be causing problems, this program works by running various stress tests on drivers, in order to produce a BSOD which will locate the driver; run for least 24 hours:
information   Information

Select Individual Settings option, and then enable all the settings, apart from Low Resources Simulation.
Okay, I will do that tonight. I'll leave it on running all night and then I will report back to you as soon as it is finished. Listen, thanks for helping me out. I know it's not easy for you trying to help me with such delays and actually not being present with the pc itself. I'll let you know how it goes.

Edit: Computer just froze, twice. Had to restar it, was playing lol brw(and this doesn't happen just with lol, I haven't seen a pattern yet, but it just happened) Io kept playing and boom, I got this: with a skipping noise. Also, so you know if the driver verifier is still running wen after restating it a purple of time after freezes and some other stuff? Do I have to manually disable it after 24hrs?

Edit 2: just got another one of those ugly screens, no blue screen. Only difference is that this one turned out gray. I left it idle for a few minutes while I was at the bathroom, and come back to it. I was playing a game called space engineers when it happened, a game from steam...
My System SpecsSystem Spec
03 Nov 2013   #18
x BlueRobot

 

You have to manually disable Driver Verifier, and the games may be crashing like that, because of Driver Verifier, it monitors the activities of each driver specified silently in the background.

Have you tried Driver Verifier with just web browsing?

Welcome too
My System SpecsSystem Spec
03 Nov 2013   #19
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
You have to manually disable Driver Verifier, and the games may be crashing like that, because of Driver Verifier, it monitors the activities of each driver specified silently in the background.

Have you tried Driver Verifier with just web browsing?

Welcome too
I will do that right now! and also, do you think it would be better if i left it on for 24+ hours to be extra sure. I haven't been using it that much today my friend came over and we've been on my old laptop just so we didnt deal with the crashing.

edit: Also, I'm not sure if the program saved the freezes. I had to manually reboot and showed no reports on it. Is the verifier only made for bsods?
My System SpecsSystem Spec
04 Nov 2013   #20
x BlueRobot

 

Driver Verifier will create a BSOD if it finds a problem, usually with a Stop 0xC9 bugcheck, but depends on the nature of why it crashed.

I know some people, recommend 36 hours instead of 24 hours, and there was a thread I had, it took a few days of on and off testing with Driver Verifier to find the culprit, which turned out to be some ASUS program.
My System SpecsSystem Spec
Reply

 BSOD Randomly, OBJECT CRITICAL_OBJECT_TERMINATION




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Object reference not set to an instance of an object
Please help me Object reference not set to an instance of an object. at Tube_Detonator.Main.Updated() at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
General Discussion
CRITICAL_OBJECT_TERMINATION bsod
Hello, I have replaced memory sticks on my system and have been stable since December 2013. Came home to hook up a camera and ended up with this CRITICAL_OBJECT_TERMINATION blue screen. Please look at the 2/26/14 screen dump and advise me of what i should do.
BSOD Help and Support
BSOD Critical_Object_Termination 0x000000f4
Started getting BSOD a few months ago started out 1 or 2 every week or so but has gotten progressively worse. At the start it only happened while playing W.O.W or other MMOs, now it will happen at random on boot up. Before it happens there is always a chirp but I've not been able to pin point from...
BSOD Help and Support
BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly
Hi All I built a custom machine a month ago and been receiving very strange BSODs all with the same message for the last month. All drivers are upto date including the SSD as primary and the BIOS What happens is intermittent and my machine freezes for a few seconds then eventually starts...
BSOD Help and Support
Random BSOD CRITICAL_OBJECT_TERMINATION
I have been having random BSODs for a month now, and they all seem to relate to the windows kernel according to WhoCrashed, but that is all it gives me. I recently reinstalled my OS because I got a SSD boot drive, I would say about a month ago. CPU: i7 950 @ 4.2GHz Motherboard: Asus Rampage...
BSOD Help and Support
Bsod critical_object_termination
First 2 BSOD I've had in a while and the error msg was CRITICAL_OBJECT_TERMINATION & PAGE_FAULT_IN_NONPAGED_AREA. Info: Windows 7 Ultimate x64 Full Retail Specs: - i7 core processor - 12 gb ram - 8 TB HDD System hardware is probably 6 months old & total uptime since reinstall is 29...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:42.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App