Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Randomly, OBJECT CRITICAL_OBJECT_TERMINATION

13 Nov 2013   #31
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Something memory and I/O related is going wrong, and I believe it is related to hardware.

Code:
BugCheck F4, {3, fffffa8007db3b30, fffffa8007db3e10, fffff800023c37b0}

----- ETW minidump data unavailable-----
Probably caused by : wininit.exe
Code:
(NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
Have you tried one RAM stick at a time? Checked the DIMM slots are free of dust?
No, but do you really think it could be the RAM? I ran that memtest for like 14 hours and got 0 errors.


My System SpecsSystem Spec
.
14 Nov 2013   #32
x BlueRobot

 

I'm not sure, those errors can be caused by other things, like instructions executing at wrong privilege levels and then accessing registers or I think a stack overflow can result in errors like that.
My System SpecsSystem Spec
16 Nov 2013   #33
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
I'm not sure, those errors can be caused by other things, like instructions executing at wrong privilege levels and then accessing registers or I think a stack overflow can result in errors like that.
Sorry for the late reply. I will try running my pc with one dram. But how will this help us fugues out the problems. Sorry for the questions I just like learning that way in the future if I get a problem I can now what to do. Also, what if it doesn't get any errors with just one dram at a time?
My System SpecsSystem Spec
.

17 Nov 2013   #34
x BlueRobot

 

Okay, if it gets errors or problems with one RAM stick, then move to the next slot. If errors happen in all the slots for that RAM stick, then the problem may lie with that particular stick. Otherwise, errors with the same RAM stick occurring in only one slot or particular slots will point to a motherboard issue. This process should be repeated for all the RAM if possible.
My System SpecsSystem Spec
17 Nov 2013   #35
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Okay, if it gets errors or problems with one RAM stick, then move to the next slot. If errors happen in all the slots for that RAM stick, then the problem may lie with that particular stick. Otherwise, errors with the same RAM stick occurring in only one slot or particular slots will point to a motherboard issue. This process should be repeated for all the RAM if possible.
Oh I see. I just got a blue screen and decided to just take one ram. If I get an error I will change that ram stick onto the next slot and then the next and next, the mobo has 4 slots for ram. Then If I get errors with that I should change the ram stick with the other one right? here is the deump file

EDIT: SIGH* I just got a black screen. going to change the ram stick onto another slot
My System SpecsSystem Spec
18 Nov 2013   #36
x BlueRobot

 

Code:
BugCheck F4, {3, fffffa8006e05060, fffffa8006e05340, fffff800023dd7b0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe
Code:
3: kd> !error 0xc0000006
Error code: (NTSTATUS) 0xc0000006 (3221225478) - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
The same frequent issue, black screens usually always indicate some form of hardware failure too.
My System SpecsSystem Spec
18 Nov 2013   #37
osmeus

New York
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Code:
BugCheck F4, {3, fffffa8006e05060, fffffa8006e05340, fffff800023dd7b0}

----- ETW minidump data unavailable-----
Probably caused by : csrss.exe
Code:
3: kd> !error 0xc0000006
Error code: (NTSTATUS) 0xc0000006 (3221225478) - The instruction at 0x%p referenced memory at 0x%p. The required data was not placed into memory because of an I/O error status of 0x%x.
The same frequent issue, black screens usually always indicate some form of hardware failure too.
do you think it could be the motherboard? should i get it replaced?

EDIT: I have noticed that every time I have an iphone or something connected to the same wifi and it's close, is when the black screens and blue screens mostly appear. Could it be that the network adapter is maybe causing it? like, the wifi signal gets mixed or something to do with the.. signal?
My System SpecsSystem Spec
19 Nov 2013   #38
x BlueRobot

 

I highly doubt that a phone using the WiFi is going to be the problem, I suspect maybe motherboard issues. What are the other slots like?
My System SpecsSystem Spec
19 Nov 2013   #39
osmeus

New York
 
 

Ill take a good video of everything on my pc so you can see everything./ Ill closely video tape how I connected everything ok ill do that.and I didnt understand your question about the motherboard, how is the other slots?
My System SpecsSystem Spec
20 Nov 2013   #40
x BlueRobot

 

Sorry, does the RAM cause the same problems your experiencing now in the other DIMM (RAM) slots?
My System SpecsSystem Spec
Reply

 BSOD Randomly, OBJECT CRITICAL_OBJECT_TERMINATION




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Object reference not set to an instance of an object
Please help me Object reference not set to an instance of an object. at Tube_Detonator.Main.Updated() at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj)
General Discussion
CRITICAL_OBJECT_TERMINATION bsod
Hello, I have replaced memory sticks on my system and have been stable since December 2013. Came home to hook up a camera and ended up with this CRITICAL_OBJECT_TERMINATION blue screen. Please look at the 2/26/14 screen dump and advise me of what i should do.
BSOD Help and Support
BSOD Critical_Object_Termination 0x000000f4
Started getting BSOD a few months ago started out 1 or 2 every week or so but has gotten progressively worse. At the start it only happened while playing W.O.W or other MMOs, now it will happen at random on boot up. Before it happens there is always a chirp but I've not been able to pin point from...
BSOD Help and Support
BSOD ntoskrnl.exe+7f1c0 CRITICAL_OBJECT_TERMINATION randomly
Hi All I built a custom machine a month ago and been receiving very strange BSODs all with the same message for the last month. All drivers are upto date including the SSD as primary and the BIOS What happens is intermittent and my machine freezes for a few seconds then eventually starts...
BSOD Help and Support
Random BSOD CRITICAL_OBJECT_TERMINATION
I have been having random BSODs for a month now, and they all seem to relate to the windows kernel according to WhoCrashed, but that is all it gives me. I recently reinstalled my OS because I got a SSD boot drive, I would say about a month ago. CPU: i7 950 @ 4.2GHz Motherboard: Asus Rampage...
BSOD Help and Support
Bsod critical_object_termination
First 2 BSOD I've had in a while and the error msg was CRITICAL_OBJECT_TERMINATION & PAGE_FAULT_IN_NONPAGED_AREA. Info: Windows 7 Ultimate x64 Full Retail Specs: - i7 core processor - 12 gb ram - 8 TB HDD System hardware is probably 6 months old & total uptime since reinstall is 29...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 20:13.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App