Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD When going into Standby Mode (Power Failure or something)

23 Oct 2013   #1
ArashiKun

Windows 7 Professional 64bit
 
 
BSOD When going into Standby Mode (Power Failure or something)

Hey everyone, uhm i got the following problem with my Laptop:

When ever i try to go into the power savemode (standby) or sleep mode my screen just turns black and nothing happends for now. Then about after 15 minutes or so i suddenly get a BSOD.

I uploaded the Dumpfiles as an attachment to this post.

I hope you can help me, would be glad.

Sincerly ArashiKun.


My System SpecsSystem Spec
.
23 Oct 2013   #2
x BlueRobot

 

Code:
BugCheck 9F, {3, fffffa8003668060, fffff80000ba2748, fffffa80042d4e10}

Probably caused by : ntkrnlmp
Code:
0: kd> !irp fffffa80042d4e10
Irp is active with 3 stacks 2 is current (= 0xfffffa80042d4f28)
 No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  
     cmd  flg cl Device   File     Completion-Context
 [  0, 0]   0  0 00000000 00000000 00000000-00000000    

            Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 fffffa8006f68050 00000000 fffff800036cb200-fffffa80041c3210 Success Error Cancel pending
           \Driver\NdisWan    nt!PopSystemIrpCompletion
            Args: 00014400 00000000 00000004 00000002
 [  0, 0]   0  0 00000000 00000000 00000000-fffffa80041c3210    

            Args: 00000000 00000000 00000000 00000000
The problem seems to be caused by the NDIS module, holding a pending IRP for too long causing the system to time out.

Remove:

Code:
Start Menu\Programs\Kaspersky Internet Security 2013
Internet Security programs are prime causes of problems with network related modules, please remove Kaspersky completely with the Kaspersky Removal Tool.

Install and perform full scans with:
information   Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system

You can also view this thread for a complete free and lightweight security protection combination:Remove:

Code:
Start Menu\Programs\DAEMON Tools Lite
Quote   Quote: Originally Posted by Arc View Post
Download SPTD standalone installer from Disk-Tools.com, and execute the downloaded file as guided below :
  • Double click to open it.
  • Click this button only:
  • If it is grayed out, as in the picture, there is no more SPTD in your system, and you just close the window.
Daemon Tools uses a driver called sptd.sys, which is known to cause BSODs with Windows 7. It is recommend you remove this program, and use Windows own in-built features or ImgBurn.

Code:
Start Menu\Programs\Java
Start Menu\Programs\Java Development Kit
Do you absolutely require Java? Do you write any programs in Java? If so, ensure you have installed the latest version of the Java runtime on your system from here - Java SE - Downloads | Oracle Technology Network | Oracle

You'll want to install the JRE if you just run Java programs, and only install the JDK if your a developer.

Some general information about the latest security patches and possible vulnerabilities - http://www.oracle.com/technetwork/to...3-1899837.html
My System SpecsSystem Spec
23 Oct 2013   #3
ArashiKun

Windows 7 Professional 64bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post

Remove:

Code:
Start Menu\Programs\Kaspersky Internet Security 2013
Internet Security programs are prime causes of problems with network related modules, please remove Kaspersky completely with the Kaspersky Removal Tool.
This cannot be... i had this Laptop for 3 years now i had no problems with this until i formated and reinstalled
everything. Even Kaspersky ran without problem. Why should it cause a problem now? Same with daemon tools.

And so the main problems are just these Programms?
My System SpecsSystem Spec
.

24 Oct 2013   #4
x BlueRobot

 

It has happened before, and at least remove the programs as a test. It won't take long to install them again if there isn't any difference.
My System SpecsSystem Spec
Reply

 BSOD When going into Standby Mode (Power Failure or something)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Driver Power State Failure after standby
Hello everyone, I have recently been getting BSODs after returning from standby. This problem started after I installed a new CPU cooler, for which I had to disassemble the whole computer. After reassembling, the cooler works find, but the BSODs started. I have tried to analyze the dumps...
BSOD Help and Support
BSOD During Sleep Mode - Driver State Power Failure
Hello, all. Every now and again my laptop BSOD's when I leave it on sleep mode over night. Today the laptop lit up and started running while it was closed and I opened it to see the Driver_State_Power_Failure error message. Attached are the files gained from the SF Diagnostics Tool. Any help is...
BSOD Help and Support
BSOD after sleep mode, error DRIVER POWER STATE FAILURE 0x0000009f
Hello all This is my first post in here. Please bear over with my English – it is not my native language. My problem is on a Media Centre machine where I recently upgraded Motherboard and processor. I have the following setup on the machine: SILVERSTONE Grandia 04 DeZen PSU 500 Watt,...
BSOD Help and Support
BSOD after sleep mode, 0x0000009f (DRIVER POWER STATE FAILURE)
Hello I am experiencing a BSOD (DRIVER POWER STATE FAILURE) error with my ACER notebook. It always come up after I put the computer in sleep mode. After dozen of search and websites, I found this forum. I hope you will be able to help me. Please find below the informations about my OS
BSOD Help and Support
BSOD when going sleep mode "DRIVER POWER STATE FAILURE"
Hi, i keep having this issue. Anyone knows how to solve? My minidump is https://skydrive.live.com/#cid=392FCBBA17F5ACA1&id=392FCBBA17F5ACA1%21187
BSOD Help and Support
BSOD out of Standby mode
I am getting the BSOD once my HTPC comes out of standby mode. I thought that I had faulty RAM so i purchased new RAM and it seemed to have fixed the problem for about three weeks, but now i notice that I continue to get the BSOD once my machine comes out of standby mode. Below is the problem...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:48.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App