Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD occurs randomly once or twice a day

26 Oct 2013   #1
bebopkid

Windows 7 Home Premium 64 bit
 
 
BSOD occurs randomly once or twice a day

Thanks for any help you can offer.


My System SpecsSystem Spec
.
26 Oct 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi bebopkid.

Download and install Display Drivers for Intel® Core™ Processors on 64-bit Windows 7 ; it works for your Embedded Intel® Core™ i5 Processors.

Let us know the results.
My System SpecsSystem Spec
27 Oct 2013   #3
bebopkid

Windows 7 Home Premium 64 bit
 
 

Hi, thanks for the response. I downloaded and installed the driver last night.

I just had another BSOD.

I reran the SF diagnostic tool and attached the results.
My System SpecsSystem Spec
.

28 Oct 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If memtest comes free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
My System SpecsSystem Spec
30 Oct 2013   #5
bebopkid

Windows 7 Home Premium 64 bit
 
 

Thanks for the response. I let the memory test run for 12 hours. I stopped it in the 10th pass. There were no errors. I'm going to turn DV on now. I'll update with the results.
My System SpecsSystem Spec
31 Oct 2013   #6
bebopkid

Windows 7 Home Premium 64 bit
 
 

Here is the diagnostic tool zip file of the crash with the driver verifier running.

Thanks for looking at this.
My System SpecsSystem Spec
31 Oct 2013   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Get Intel® PROSet/Wireless Software and Drivers for Windows 7.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck D1, {fffff9803556aec2, 2, 1, fffff88005642627}

*** WARNING: Unable to verify timestamp for NETw5s64.sys
*** ERROR: Module load completed but symbols could not be loaded for NETw5s64.sys
Probably caused by : NETw5s64.sys ( NETw5s64+3c627 )

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff9803556aec2, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88005642627, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800030c2100
GetUlongFromAddress: unable to read from fffff800030c21c0
 fffff9803556aec2 

CURRENT_IRQL:  2

FAULTING_IP: 
NETw5s64+3c627
fffff880`05642627 6689b8a2000000  mov     word ptr [rax+0A2h],di

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TAG_NOT_DEFINED_c000000f:  FFFFF88002F22FB0

TRAP_FRAME:  fffff88002f222a0 -- (.trap 0xfffff88002f222a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff9803556ae20 rbx=0000000000000000 rcx=fffffa80097dc000
rdx=fffffa80085b7000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88005642627 rsp=fffff88002f22430 rbp=0000000000000000
 r8=0000000000000316  r9=fffff88001559d94 r10=fffff88002f22770
r11=fffff88002f22350 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
NETw5s64+0x3c627:
fffff880`05642627 6689b8a2000000  mov     word ptr [rax+0A2h],di ds:fffff980`3556aec2=????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002e8a169 to fffff80002e8abc0

STACK_TEXT:  
fffff880`02f22158 fffff800`02e8a169 : 00000000`0000000a fffff980`3556aec2 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`02f22160 fffff800`02e88de0 : fffffa80`097dc000 fffff800`0332413c fffffa80`05b7df80 fffff980`03f76df0 : nt!KiBugCheckDispatch+0x69
fffff880`02f222a0 fffff880`05642627 : fffff980`03f76df0 00000000`00000000 fffff880`033bdc84 fffff800`00000003 : nt!KiPageFault+0x260
fffff880`02f22430 fffff980`03f76df0 : 00000000`00000000 fffff880`033bdc84 fffff800`00000003 00000000`00000005 : NETw5s64+0x3c627
fffff880`02f22438 00000000`00000000 : fffff880`033bdc84 fffff800`00000003 00000000`00000005 fffff800`02f4e5cb : 0xfffff980`03f76df0


STACK_COMMAND:  kb

FOLLOWUP_IP: 
NETw5s64+3c627
fffff880`05642627 6689b8a2000000  mov     word ptr [rax+0A2h],di

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  NETw5s64+3c627

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: NETw5s64

IMAGE_NAME:  NETw5s64.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4b4df6b9

FAILURE_BUCKET_ID:  X64_0xD1_VRF_NETw5s64+3c627

BUCKET_ID:  X64_0xD1_VRF_NETw5s64+3c627

Followup: MachineOwner
---------

1: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff9803556aec2, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff88005642627, address which referenced memory

Debugging Details:
------------------


WRITE_ADDRESS:  fffff9803556aec2 

CURRENT_IRQL:  2

FAULTING_IP: 
NETw5s64+3c627
fffff880`05642627 6689b8a2000000  mov     word ptr [rax+0A2h],di

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VERIFIER_ENABLED_VISTA_MINIDUMP

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TAG_NOT_DEFINED_c000000f:  FFFFF88002F22FB0

TRAP_FRAME:  fffff88002f222a0 -- (.trap 0xfffff88002f222a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff9803556ae20 rbx=0000000000000000 rcx=fffffa80097dc000
rdx=fffffa80085b7000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88005642627 rsp=fffff88002f22430 rbp=0000000000000000
 r8=0000000000000316  r9=fffff88001559d94 r10=fffff88002f22770
r11=fffff88002f22350 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei pl zr na po nc
NETw5s64+0x3c627:
fffff880`05642627 6689b8a2000000  mov     word ptr [rax+0A2h],di ds:fffff980`3556aec2=????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff80002e8a169 to fffff80002e8abc0

STACK_TEXT:  
fffff880`02f22158 fffff800`02e8a169 : 00000000`0000000a fffff980`3556aec2 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`02f22160 fffff800`02e88de0 : fffffa80`097dc000 fffff800`0332413c fffffa80`05b7df80 fffff980`03f76df0 : nt!KiBugCheckDispatch+0x69
fffff880`02f222a0 fffff880`05642627 : fffff980`03f76df0 00000000`00000000 fffff880`033bdc84 fffff800`00000003 : nt!KiPageFault+0x260
fffff880`02f22430 fffff980`03f76df0 : 00000000`00000000 fffff880`033bdc84 fffff800`00000003 00000000`00000005 : NETw5s64+0x3c627
fffff880`02f22438 00000000`00000000 : fffff880`033bdc84 fffff800`00000003 00000000`00000005 fffff800`02f4e5cb : 0xfffff980`03f76df0


STACK_COMMAND:  kb

FOLLOWUP_IP: 
NETw5s64+3c627
fffff880`05642627 6689b8a2000000  mov     word ptr [rax+0A2h],di

SYMBOL_STACK_INDEX:  3

SYMBOL_NAME:  NETw5s64+3c627

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: NETw5s64

IMAGE_NAME:  NETw5s64.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  4b4df6b9

FAILURE_BUCKET_ID:  X64_0xD1_VRF_NETw5s64+3c627

BUCKET_ID:  X64_0xD1_VRF_NETw5s64+3c627

Followup: MachineOwner
---------

1: kd> lmvm NETw5s64
start             end                 module name
fffff880`05606000 fffff880`05d65000   NETw5s64 T (no symbols)           
    Loaded symbol image file: NETw5s64.sys
    Image path: \SystemRoot\system32\DRIVERS\NETw5s64.sys
    Image name: NETw5s64.sys
    Timestamp:        Wed Jan 13 22:07:13 2010 (4B4DF6B9)
    CheckSum:         0075EBFF
    ImageSize:        0075F000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
My System SpecsSystem Spec
02 Nov 2013   #8
bebopkid

Windows 7 Home Premium 64 bit
 
 

Hi,

I updated the driver mentioned in the previous response.

I just got another blue screen. Here is the diagnostic files.

Thanks.
My System SpecsSystem Spec
03 Nov 2013   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Your crash dumps are not showing any finite probable cause. In such a situation, it is better to enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
04 Nov 2013   #10
bebopkid

Windows 7 Home Premium 64 bit
 
 

Thanks for the response. I let the driver verifier run for 24 hours with no crash. I have turned it off. If I crash again, I'll turn it back on and send in the diagnostic files.

Thanks.
My System SpecsSystem Spec
Reply

 BSOD occurs randomly once or twice a day




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Occurs Randomly iaStorA.sys
Based on the BSOD I know that the iaStorA.sys file is the culprit and I've updated to the latest Intel Rapid Storage drivers. Unfortunately that hasn't helped. I also cant even do disk checks or a system restore becuz the BSOD always interrupts them. The BSOD also seems to occur randomly. Sometimes...
BSOD Help and Support
BSOD occurs Randomly
Windows 7 Home Premium 64 bit Full retail, same OS as originally installed one. Age of system is 10 months. Reinstalled OS once due to needing a new hard drive 9 months ago. The BSODs occur randomly and seem to happen once a month. I don't know if they're all the same error, but the most...
BSOD Help and Support
BSOD Occurs Randomly + Details.
Please someone help me. I have experienced the BSOD three times in the last few weeks and it happened again there now. The details of the last dump are below: Problem Signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional Information about the...
BSOD Help and Support
BSOD occurs randomly...ntoskrnl.exe
Computer is crashing on me, never any specific time, or program as far as I can tell computer is a Gateway SX2800-07 running Windows 7 Home Premium -x64 -OEM install -about a year old, hasn't been reinstalled since -passed the health test with no problems I've attached a .zip with a...
BSOD Help and Support
BSOD occurs randomly
Hi! I never postet on this forum, normally i manage to solve my problems alone, but this one is totally out of my reach. My newly bought selfbuild Gamer-PC has randomly BSOD, no matter what i do. Normally i use Linux and there i know where to start debugging, but my Windows 7 knowledge is...well...
BSOD Help and Support
BSOD occurs randomly
Hi I keep getting random BSODs while playing, surfing pretty much doing anything. The thing is that it can occur anytime but mostly happens like once every 3 days or something like that. Since i don't know why i keep getting them and it's really starting to bug me I followed the: How to...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:32.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App