Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSOD's on new build, bad video card corrupting file system?

27 Oct 2013   #1
carbide

Windows 7 Home Premium 64bit
 
 
Random BSOD's on new build, bad video card corrupting file system?

This is a "new" build, with a mixture of new/used parts. While waiting for a EVGA GTX 650ti Boost, I was using a regular GTX 650 to install all the software. I did not have any problems.

As soon as the new video card was installed I started having problems. Random BSOD, processes stopping, random shut downs, etc. It might work great for hours installing windows, windows updates, running burn in tests, video tests, etc, but then something always goes awry. Some of the errors led me to believe I was having hard drive problems, but I've tried 3 drives with 3 clean Windows installations, and problems still persist. I've ran hard drive tests, memory tests with no known issues.

My power supply is a little on the small side, Corsair CX430 430watt, but I've ran the various PS calculators and I think I should be ok.

I have the latest EVGA drivers for the video card. I would like some help interpreting the dumps so I can figure out if it is indeed the video card causing problems or if it's something as simple as a driver. From what I've found online, the EVGA GTX 650ti Boost has been known to cause BSOD.

Attached is one of the dumps I was able to capture.


My System SpecsSystem Spec
.
27 Oct 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Is the GPU overclocked? If so, use it in normal settings.

Also, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

If furmark is passed, we will try to use some earlier drivers.

Avast is failing there, too.
Code:
fffff880`0abbc148  fffff880`041126fcUnable to load image aswSnx.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for aswSnx.sys
*** ERROR: Module load completed but symbols could not be loaded for aswSnx.sys
 aswSnx+0x306fc
Uninstall Avast using Avast Uninstall Utility. Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Let us know the results.
My System SpecsSystem Spec
27 Oct 2013   #3
carbide

Windows 7 Home Premium 64bit
 
 

Thank you for your response.

GPU is not, and has not been overclocked. I ran the Furmark test for 20 minutes (wasn't sure how long to run it) without any problems.

Unistalled Avast, and installed MSE. Ran full scans on MSE and MBAN with no issues found.
My System SpecsSystem Spec
.

29 Oct 2013   #4
carbide

Windows 7 Home Premium 64bit
 
 

Still getting BSOD. New report attached.

Would appreciate any feedback, thanks.
My System SpecsSystem Spec
30 Oct 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

BAD_POOL_HEADER (19)
The pool is already corrupt at the time of the current request.
This may or may not be due to the caller.
The internal pool links must be walked to figure out a possible cause of
the problem, and then special pool applied to the suspect tags or the driver
verifier to a suspect driver.
Enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.
My System SpecsSystem Spec
30 Oct 2013   #6
carbide

Windows 7 Home Premium 64bit
 
 

Started driver verifier and had BSOD almost immediately. Attached are 3 dumps, not sure I was able to get all files for each dump, as it was still crashing, even after stopping the verifier.
My System SpecsSystem Spec
30 Oct 2013   #7
carbide

Windows 7 Home Premium 64bit
 
 

Just had to shut the PC off as it was completely unresponsive. Upon restart, I got a long, short short beep code and no display.

Restarted it and it booted fine, was able to get a complete dump, attached.

Thanks for your help!
My System SpecsSystem Spec
30 Oct 2013   #8
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

It appears that you have disabled the DV. Rightly done ... as the DV enabled minidump is not showing any driver as failing.

Make it sure that the OCZ Vertex2 SSD is running with the up-to-date firmware.
Download OCZ Toolbox and Firmware Updates

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Let us know the results.
My System SpecsSystem Spec
30 Oct 2013   #9
carbide

Windows 7 Home Premium 64bit
 
 

Thanks.

I'm pretty sure my SSD does not have the most recent firmware. However, I was having the same/similar problems with another SSD (different brand) and a standard HDD, that I both tried as boot drives before I posted originally. I also ran Memtest for a couple hours previously with no errors.

I will work on doing both your recommendations.

Are there any indications this could all be caused by a bad video card? That was the only thing that was changed before all my problems. That said, the system had not been running very long with the other card. I just want to make sure if it's likely the video card, that I can get it replaced before my 30 day Newegg period is over.
My System SpecsSystem Spec
30 Oct 2013   #10
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

There is no evidence that we can suspect the graphics card, but enough evidence to suspect storage.

If you have any doubt, Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
My System SpecsSystem Spec
Reply

 Random BSOD's on new build, bad video card corrupting file system?




Thread Tools




Similar help and support threads
Thread Forum
Random BSOD, new system build, unresolved for weeks
Hi, I have been trying to solve a BSOD issue i have been having now for weeks. I installed a fresh copy of windows 7 64bit on my new rig, and all drivers are installed. I then installed my wifi dongle and then antivirus and a few others like VLC media player etc... I did all windows updates...
BSOD Help and Support
Video Card Question for New PC Build
I'm building a new computer and need some video card advice. I have the following components (listed below) for my new build. I need advice on getting the best video card for my needs. I am NOT a gamer. I currently have (3) monitors on my main PC, and this new build will replace it. I will need...
Graphic Cards
WIN 7 corrupting XP HD in dual boot system
My transition to WIN7 has been a long process, primarily because my Layla 24 sound card has had driver problems that are about to be resolved. I installed WIN7, it was on a separate 80 gig HD and I left a 2nd 80 gig HD there for my XP, so I'd have a dual boot system. I tend to have lots of...
General Discussion
4th or 6th BlueScreen, same boot file corrupting :(
So I got my PC about a week or two ago, worked fine, up until about 4 days ago, which I got my first BlueScreen, didn't know what to do, so I did a System Restore, happened again earlier today, fixed it, now it happened again just a few minutes ago!!!!!!! :mad: Its the same F*cking file that...
BSOD Help and Support
Trying to install video card on new build
I recently put together a new computer, using some parts from my last one. The video card I was going to reuse (PNY GeForce 210 DDR2 512MB PCIe 2.0), but I am having a lot of issues getting it to work. Right now I'm using the onboard video, but as soon as I plug the video card in and fire it up...
Graphic Cards
Random BSOD, video card is probably the cause
I just recently did a major overhaul of my system replacing everything aside from my video card, PSU and hard drives. I also went from Windows 7 RC to a clean install of Windows 7 Home Premium using upgrade media. I had no problems at all when running the RC, however I'm getting blue screens that...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:55.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App