Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD random cause, thanks to ntoskrnl.exe

30 Oct 2013   #11
Maxo618

windows 7 pro 64 bit
 
 

Fur mark: maxed at 88 degreesC no artifacts ran for 30 minutes

mem test: no bad memory allocations, even did the built in one for 99 passes no bad memory detected.

powersupply needed was 500watt I have a 850watt

computer has been on for about 8 hours now. heavy gaming with meto last light and splintercell. I'm running 7 internal fans, a watercooled CPU, I doubt overheating is a problem.


My System SpecsSystem Spec
.
30 Oct 2013   #12
Maxo618

windows 7 pro 64 bit
 
 

another BSOD they seem to be getting more frequent.
My System SpecsSystem Spec
31 Oct 2013   #13
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The last BSOD is caused by Intel XHCI drivers.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 44, {fffffa800c8e5c60, eae, 0, 0}

*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys
Unable to load image \SystemRoot\system32\DRIVERS\iusb3hub.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for iusb3hub.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys
Probably caused by : iusb3xhc.sys ( iusb3xhc+625eb )

Followup: MachineOwner
---------
Update it from https://downloadcenter.intel.com/Sea...oller%20Driver ......

But I expect that the graphics issue will continue.
My System SpecsSystem Spec
.

31 Oct 2013   #14
Maxo618

windows 7 pro 64 bit
 
 

Well, I downloaded the new driver. thank you again arc for being so patient with this whole ordeal. I'm off to class ill leave it runing and see if it tripped anything while I'm at classes.
My System SpecsSystem Spec
02 Nov 2013   #15
Maxo618

windows 7 pro 64 bit
 
 

thanks again arc 10 passes on your mem test and then another and 99 passes using the in depth mem-test on windows no problem or errors. just had another recent BSOD got on and got (after about 10 hours of the computer being on) and got on skype, where is the BSOD
My System SpecsSystem Spec
02 Nov 2013   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The zip does not contain any information any information about a BSOD.

Attachment 292024
My System SpecsSystem Spec
02 Nov 2013   #17
Maxo618

windows 7 pro 64 bit
 
 

Okay that is bazaar its not even showing up on my bluescreen viewer too. i will just wait until the next one then sorry about that archie
My System SpecsSystem Spec
02 Nov 2013   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Not a big issue. Make it sure that the crash dump recording is properly configured.

Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.

Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.
My System SpecsSystem Spec
04 Nov 2013   #19
Maxo618

windows 7 pro 64 bit
 
 

Two blue-screens this afternoon back to back
My System SpecsSystem Spec
05 Nov 2013   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Same thing .... USB3 related issue.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1E, {0, 0, 0, 0}

*** WARNING: Unable to verify timestamp for iusb3xhc.sys
*** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys

Probably caused by : iusb3xhc.sys ( iusb3xhc+2cde2 )

Followup: MachineOwner
---------
Now make it sure that all the USB devices are working properly. Also disable USB selective suspend.
USB Selective Suspend - Turn On or Off
My System SpecsSystem Spec
Reply

 BSOD random cause, thanks to ntoskrnl.exe




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSOD ntoskrnl.exe
Hello My computer gets a blue screen daily and i dont know how to fix it. i looked into the dump file and it said probable cause is ntoskrnl.exe my computer specs are: Windows 7 x64 Nvidia geforce gt430 2x 2gb ram hitachi 1tb hard drive
BSOD Help and Support
Random BSOD, ntoskrnl.exe
Hi everyone, I just started getting the BSOD yesterday on my Vaio laptop. I have done all of the standard cleaning procedures (reg clean, temp files etc) and I also updated a whole lot of outdated drivers. At first everything seemed fine but it BSODed again. I tried to read the minidump and all I...
BSOD Help and Support
Random BSOD Reporting ntoskrnl.exe+75c40 & ntoskrnl.exe+7efc0
I'm getting random Blue Screens and can't figure out why. I'm not running any hardcore programs. I'm mostly just using Microsoft Office and Firefox. The BSOD's seem to happen when I'm in Outlook, Excel or Firefox. Haven't been able to determine exactly which at the time as I'm moving back and...
BSOD Help and Support
Random BSOD's by ntoskrnl.exe
Hi i'm new to this forum, so bare with me. Im getting BSOD's very randomly i tried everything that i can think of like update everything to the latest, tested the memory with memtest(no errors were found) ran chkdsk nothing is working and im getting a bit frustrated the dump files are attached to...
BSOD Help and Support
Random BSOD, ntoskrnl I think
Hello, Since quite a while I have have been having BSODs and I have no idea how to fix it. I've never had any troubles with BSODs before, until a couple of weeks ago. As I can recall it started after cleaning up my pc but I'm not entirely sure if that's the problem. I run windows 7 home...
BSOD Help and Support
Random BSOD - ntoskrnl.exe?
Hello everybody, I am running a relatively new Win7 x64 System (about 4 weeks old) and getting now since one week or so random bsod with multiple error codes and causes. But mostly ntoskrnl.exe seems to be th culprit. It happens more or less randomly, but more often while using graphic programs...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:51.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App