Fur mark: maxed at 88 degreesC no artifacts ran for 30 minutes
mem test: no bad memory allocations, even did the built in one for 99 passes no bad memory detected.
powersupply needed was 500watt I have a 850watt
computer has been on for about 8 hours now. heavy gaming with meto last light and splintercell. I'm running 7 internal fans, a watercooled CPU, I doubt overheating is a problem.
another BSOD they seem to be getting more frequent.
The last BSOD is caused by Intel XHCI drivers.
Update it from https://downloadcenter.intel.com/Sea...oller%20Driver ......Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 44, {fffffa800c8e5c60, eae, 0, 0} *** WARNING: Unable to verify timestamp for iusb3xhc.sys *** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys Unable to load image \SystemRoot\system32\DRIVERS\iusb3hub.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for iusb3hub.sys *** ERROR: Module load completed but symbols could not be loaded for iusb3hub.sys Probably caused by : iusb3xhc.sys ( iusb3xhc+625eb ) Followup: MachineOwner ---------
But I expect that the graphics issue will continue.
Well, I downloaded the new driver. thank you again arc for being so patient with this whole ordeal. I'm off to class ill leave it runing and see if it tripped anything while I'm at classes.
thanks again arc 10 passes on your mem test and then another and 99 passes using the in depth mem-test on windows no problem or errors. just had another recent BSOD got on and got (after about 10 hours of the computer being on) and got on skype, where is the BSOD
Last edited by Maxo618; 02 Nov 2013 at 03:38. Reason: added BSOD file
Okay that is bazaar its not even showing up on my bluescreen viewer too. i will just wait until the next one then sorry about that archie
Not a big issue. Make it sure that the crash dump recording is properly configured.
Follow it: Dump Files - Configure Windows to Create on BSOD
Go to Option Two, Point 2. Download the .reg file and merge it in registry by double clicking it.
Now wait for another BSOD. When it occurred, search the .dmp files manually in the default path: C:\Windows\Minidump or %SystemRoot%\Minidump. See if the crash dump is recorded or not (hopefully it will be recorded).Post it following the Blue Screen of Death (BSOD) Posting Instructions.
Two blue-screens this afternoon back to back
Same thing .... USB3 related issue.
Now make it sure that all the USB devices are working properly. Also disable USB selective suspend.Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 1E, {0, 0, 0, 0} *** WARNING: Unable to verify timestamp for iusb3xhc.sys *** ERROR: Module load completed but symbols could not be loaded for iusb3xhc.sys Probably caused by : iusb3xhc.sys ( iusb3xhc+2cde2 ) Followup: MachineOwner ---------
USB Selective Suspend - Turn On or Off
Quote