Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD when watching flash videos (error code changes?)

31 Oct 2013   #11
ExtremeDude2

Windows 7 home Premium 64 bit
 
 

Yeah, I'll probably wait and see since I'm lazy and stuff


My System SpecsSystem Spec
.
03 Nov 2013   #12
ExtremeDude2

Windows 7 home Premium 64 bit
 
 

Well I've gotten 2 crashes (with no BSOD) and another BSOD all without watching any flash videos, the error code was 0x0000001E (all parameters were 0x00000000 from what I can remeber) this time, unfortunately it stop dumping at 95% so I don't have a dump to upload. I guess I'll go ahead and see if I can find a blank CD and run that thingy XD

Edit: Ran the rescue CD and found nothing as well
My System SpecsSystem Spec
08 Nov 2013   #13
ExtremeDude2

Windows 7 home Premium 64 bit
 
 

Got another BSOD (error code 0x0000003b), didn't get a dump as it stoped at 20% as seen in the picture

My System SpecsSystem Spec
.

09 Nov 2013   #14
YoYo155

Windows 10
 
 

Time for some hardware test.

warning   Warning
The Following Method Should NOT Be Performed On An SSD!


Testing the HDD:

  1. Perform a Disk Check | Disk Check- Scroll down to OPTION TWO of the tutorial and use the /R switch in the CHKDSK command | chkdsk C: /R.
  2. Then Post the Disk Check results following | This Tutorial.
  3. Once back in Windows, download Crystal Disk Info and post a screenshot (multiple shots if you have more than one drive).
  4. Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
  5. If SeaTools for DOS is unable to recognize your HDD:
  6. Visit HDDdiag and follow the instructions | Or follow the instructions below.
If SeaTools For DOS does not recognize the drive;
Boot into the BIOS using the *Fx key.
Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
Set it to IDE then save and exit usually by pressing the F10 key.
Now boot into SeaTools and it should detect the drives.
Start the Long Test and let it run.
Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
and change the SATA setting back to what it was in the first place.

When done with the testing procedure take a picture and upload it here.
Quote   Quote: Originally Posted by Arc View Post
Re-seat the sata and power.

Testing the RAM:

Quote   Quote: Originally Posted by koolkat77 View Post
Test and Diagnose RAM Issues with Memtest86+:
Tip   Tip
  • Pay close attention to part 3 of the tutorial "If you have errors"
  • Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.
When done with the testing procedure take a picture and upload it here.

Let us know the results.
My System SpecsSystem Spec
09 Nov 2013   #15
ExtremeDude2

Windows 7 home Premium 64 bit
 
 

I ran memtest with no errors. Going to test my HDD's next, and since you mentioned them I guess I should tell you that when I first installed windows I forgot to change my HDD to AHCI mode and since my mobo defaults IDE I installed windows with it assuming I have IDE drives. And as you know windows does not like it when you switch between IDE and AHCI, despite this a few months later I wanted to run my HDD's in AHCI mode. So I then edited the registry to let me do so, could this be the problem?

Edit: Attached the the CHKDSK and Crystal Disk info below (note that the seccond HDD is refurbished and was likely part of a server before XD [due to its up time])



My System SpecsSystem Spec
10 Nov 2013   #16
YoYo155

Windows 10
 
 

Thanks for the update .
Well switching between IDE and AHCI mode after the fact is OK depending on how it was carried out.
Can you link or explain as to what was done?

The CHKDSK and CDI looks good to me, what did SeaTools have to say?
How many passes did you let memtest86+ go through?
I'll see what others have to say about the dump flush hanging.
My System SpecsSystem Spec
10 Nov 2013   #17
ExtremeDude2

Windows 7 home Premium 64 bit
 
 

To switch to AHCI all I did was edit the registry value in: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci\Start and set it to 0
As for Memtest+ I only ran it 2 1/2 times (after a cold boot), and I've been meaning to run it more (after a warm boot?)
And I didn't run SeaTools yet because I wanted to see what you had to say about me setting my HDD's to AHCI
My System SpecsSystem Spec
10 Nov 2013   #18
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote:
Event[34931]:
Log Name: System
Source: Service Control Manager
Date: 2013-09-07T14:30:11.295
Event ID: 7000
Task: N/A
Level: Error
Opcode: N/A
Keyword: Classic
User: N/A
User Name: N/A
Computer: Ryan-Desktop
Description:
The WinRing0_1_2_0 service failed to start due to the following error:
The system cannot find the file specified.
Can you tell us about this service? How you have got it? It says it was installed on 03/09/2013.
Quote:
Event[33653]:
Log Name: System
Source: Service Control Manager
Date: 2013-09-03T08:14:27.473
Event ID: 7045
Task: N/A
Level: Information
Opcode: N/A
Keyword: Classic
User: S-1-5-21-1542785224-2658817956-3129912530-1000
User Name: Ryan-Desktop\Ryan
Computer: Ryan-Desktop
Description:
A service was installed in the system.

Service Name: WinRing0_1_2_0
Service File Name: C:\Users\Ryan\AppData\Local\Temp\tmpF2B7.tmp
Service Type: kernel mode driver
Service Start Type: demand start
Service Account:
But it is there in the even earlier logs, as failure Please take the virus scans as suggested earlier for one more time, including the boot one.

Upload the list of all the third party drivers Using NirSoft DriverView :
  • Download and execute Driverview
  • View > Hide Microsoft Drivers
  • Edit > Select all
  • File > Save Selected Items
  • In the Save dialog, Set the path to desktop, Put "Driverview" in the name field, and save.
  • Zip the .txt file and upload it.
upload your MSINFO32.txt file.
  1. Click on the start button
  2. Type "msinfo32" (without quotes) in the search bar of the start menu, click the resulting link. It will open the System Information window.
  3. File> Export. In the "File Name" filed, put "MSINFO32" (without Quote), give the save location to desktop, and click the "Save" button.
  4. Give the time for processing, it will save a .nfo file on your desktop.
  5. Zip it, and upload it following the instruction.
We need to know what is the 4th Hard disc, and how it is controlled.

IF you have ASUS/AMD Overdrive installed, uninstall it right now.

Perform a clean startup. Troubleshoot Application Conflicts by Performing a Clean Startup

Uninstall OpenVPN, at least for testing purpose, for the time being.

Uninstall MSE and reinstall it. Then follow Windows Update - Reset.

Also, Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Long list, but as we have lack of necessary data.

Let us know the results.
My System SpecsSystem Spec
10 Nov 2013   #19
ExtremeDude2

Windows 7 home Premium 64 bit
 
 

Sorry, I don't know what that service is. I've attached the Driverview file below and the MSINFO32 should already be on page 1 (only a .txt couldn't get the .nfo to work). I don't have any more than 2 HDD's so I don't know what "4th" one you are talking about (I do have a DVD drive though). I've also gone ahead and uninstalled AMD overdrive (goodbye my only way to OC D: ) and OpenVPN (I installed that awhile ago to try something that didn't work anyway). I'll get to doing more tests later tonight.
My System SpecsSystem Spec
11 Nov 2013   #20
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by ExtremeDude2 View Post
Sorry, I don't know what that service is. I've attached the Driverview file below and the MSINFO32 should already be on page 1 (only a .txt couldn't get the .nfo to work). I don't have any more than 2 HDD's so I don't know what "4th" one you are talking about (I do have a DVD drive though). I've also gone ahead and uninstalled AMD overdrive (goodbye my only way to OC D: ) and OpenVPN (I installed that awhile ago to try something that didn't work anyway). I'll get to doing more tests later tonight.
It works. Do what is suggested. We heed information to help you.

You say you have two HDDs only, butyour event log says it detects a controller in Hard Disc 4 Drive 4 .... the MSINFO32 is a must.

If you dont try to export it to text and dont supply it, it is totally your loss only.

EDIT: The little extent of information you have supplied .... we see AMD Overdrive is still present there.
Code:
==================================================
Driver Name       : AODDriver2.sys
Address           : 00000000`07150000
End Address       : 00000000`07182000
Size              : 0x00032000
Load Count        : 1
Index             : 165
File Type         : System Driver
Description       : AMD OverDrive Service Driver
Version           : 4.2.0.0
Company           : Advanced Micro Devices
Product Name      : AMD OverDrive Service Driver
Modified Date     : 5/23/2013 11:48:54 PM
Created Date      : 5/23/2013 11:48:54 PM
Filename          : C:\Program Files (x86)\AMD\OverDrive\amd64\AODDriver2.sys
File Attributes   : A
Service Name      : AODDriver4.2.0
Service Display Name: AODDriver4.2.0
Digital Signature : 
==================================================
Will hope your next reply will let us see that you have performed the suggested steps.
My System SpecsSystem Spec
Reply

 BSOD when watching flash videos (error code changes?)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD while watching videos error 0x0000007E
Hello guys I started to get BSOD's while watching videos through browser. It happened yesterday too, but when i was playing games it didin't happen so I ignored them. But today i got them again while watching videos ant it's getting annoying. Though somehow i don't have dmp from yesterday. My...
BSOD Help and Support
BSOD error mainly while watching videos, sometimes randomly.
This started happening maybe a week ago? I uninstalled a lot of programs that I installed like AVG, Firefox, Abode Flash, and the list goes on but nothing seems to fix it... I have no clue what it is! The only thing I've noticed is that when I'm play a game called Heroes of Newerth and looking at...
BSOD Help and Support
0x124 BSOD while watching online flash videos.
In the last couple of weeks or so I've started getting BSODs while watching flash videos online. It doesn't seem to matter where they're from I don't believe. It's also not a guaranteed thing with any given video, it appears to be at random but if I had to guess it takes maybe a half hour total of...
BSOD Help and Support
PC crash while watching videos or running flash app
first of all, hello the problem i have is that mostly the pc restart watching online videos or running flash app in the web. and a few times watching videos stored in pc i cant make a minidump file becouse pc dont make them:S. yeah allready activate the "write an event to the system log" on...
BSOD Help and Support
BSOD when playing games or watching flash videos
Hi guys, basically my old 6870 card died because of numerous BSODs it had over the 6 months throunh flash videos and it killed it with artifacts. I have recently received a brand new XFX 6870 and have been using it over a month and its been happening again with flash videos as occasionally get...
BSOD Help and Support
Freezing or BSOD when playing games or watching flash videos
I recently built a computer for someone, with relevant specs as follows: Gigabyte SKT-1155 PA65-UD3-B3 Intel 2500K Komputerbay 1333Mhz PC3 10600 / PC3 10666 8-8-8-24 1.5v 8 GB KIT ASUS GTX 560 Ever since I delivered it to him, it's been either freezing (often with popping from his...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 05:20.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App