Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD 0x000000f4 when I'm playing games and happens randomly often


31 Oct 2013   #1

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
BSOD 0x000000f4 when I'm playing games and happens randomly often

Yesterday my computer started BlueScreening often. It can't go three full hours without BlueScreening. Windows Explorer often stops working causing my home screen to disappear, which makes me have to restart my computer in order to get it to start working again. After it blue screens or Windows Explorer stops working I have to wait a little while in order for it to start properly again or it just says "disk read error" or something. It says press Ctrl+Alt+Del in order to restart the computer. I don't know what caused this or why this started, any and all help will be appreciated. Thank you!



Attached Files
File Type: zip SF_31-10-2013.zip (1.11 MB, 1 views)
My System SpecsSystem Spec
.

31 Oct 2013   #2

Windows 7 Home Premium x64
 
 

Based on what you posted it sounds like your HDD is dying, that coincides with the facts that no dumps are being recorded and the bug check code.

warning   Warning
The Following Method Should NOT Be Performed On An SSD!


Testing the HDD:

  1. Perform a Disk Check | Disk Check
  2. Then Post the results following | THIS METHOD
  3. Download SeaTools for DOS if you don't want to use a CD to test the HDD you can use YUMI – Multiboot USB Creator to create a bootable USB (instructions are found at the bottom of both pages).
  4. If SeaTools for Windows is unable to recognize your HDD visit HDDdiag and follow the instructions.
If SeaTools For DOS does not recognize the drive;
Boot into the BIOS using the *Fx key.
Look for an entry called SATA Mode (or something similar), it should be set to IDE / AHCI.
It's probably set to AHCI which is why SeaTools doesn't recognize them in the DOS environment.
Set it to IDE then save and exit usually by pressing the F10 key.
Now boot into SeaTools and it should detect the drives.
Start the Long Test and let it run.
Upon completion don't try to boot into Windows as it will only result in a BSOD, go back into the BIOS
and change the SATA setting back to what it was in the first place.


Post back with the results.
My System SpecsSystem Spec
31 Oct 2013   #3

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 
Chkdsk results

Here's what I found in event viewer -


Attached Files
File Type: txt CHKDSKResults.txt (3.3 KB, 1 views)
My System SpecsSystem Spec
.


31 Oct 2013   #4

Windows 7 Home Premium x64
 
 

I'm sorry but the disk check wasn't carried out correctly, the C: partition is in use so you need
to jump to execute OPTION 2 of the tutorial and using the /R switch.

Please try again and continue with the rest of the tests .

Also follow this tutorial to make sure you have a Kernel dump configured (which is the default setting).

Free up at least 5GB of space in your C:\ partition, you only have 1.36GB of free space.

May I ask what is partition A:\ used for?



Your page file needs to be reset to the default size again in order to generate a dump file.

Reset your Page File:

1. Start Menu> Run >type control.exe system
and press the Enter key.
A windows will open and on the Left hand side you will see Advanced system settings, click it.



2.
Next click on the Advanced tab and Settings which correspond to the Performance section;



3. Then the Advanced tab once more and click on the Change button;



4. Untick the checkbox next to Automatically manage paging file size for all drives;



5. Select No paging file and Click on the Set button;


6. Confirm all the windows.

7.
Restart the PC.

8. Reverse the procedure, by following steps 1-3, only this time select System managed size
and click the Set button;



9. Recheck the box next to Automatically manage paging file size for all drives
and exit the windows by clicking the OK button;



10. Confirm all of the remaining windows by click the OK button
and restart once again to take affect.
My System SpecsSystem Spec
01 Nov 2013   #5

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Thanks for all the help mate. I'll get to this as soon as I can, my computer is acting up a lot now. I just tried starting it again to do everything but I got another blue screen error this time, 0x0000007A. My brother said when he tried starting the computer before as well it said "missing OS." So again, I'll try to get to this if I can and if it's not too late for my HDD. Also, the reason I have two partitions is because my old hard drive was small and it began failing so my brother bought a 500GB and transferred all the files we had on the old drive to a C: partition and made a separate partition to hold any extra files we wanted. A: is used mostly for just big file downloads that aren't being able to be held in partition C:. Also, when I tried to do option 2 when the computer still functioned semi-decently it just gave me an error so I used option 1.
My System SpecsSystem Spec
03 Nov 2013   #6

Windows 7 Home Premium x64
 
 

Code:
STOP 0x0000007A: KERNEL_DATA_INPAGE_ERROR    (go to top of page)
Usual causes:  Memory, Paging file corruption, File system, Hard drive, Cabling, Virus infection, Improperly seated cards, BIOS, Bad motherboard, Missing Service Pack
Did you use an elevated command prompt to execute the CHKDSK command?

Quote   Quote: Originally Posted by YoYo155 View Post
C: partition is in use so you need
to jump to execute OPTION 2 of the tutorial and using the /R switch.

Please try again and continue with the rest of the tests .

Free up at least 5GB of space in your C:\ partition, you only have 1.36GB of free space.


Reset your Page File:

1. Start Menu> Run >type control.exe system
and press the Enter key.
A windows will open and on the Left hand side you will see Advanced system settings, click it.



2.
Next click on the Advanced tab and Settings which correspond to the Performance section;



3. Then the Advanced tab once more and click on the Change button;



4. Untick the checkbox next to Automatically manage paging file size for all drives;

Select No paging file and Click on the Set button;


5. Confirm all the windows.

6.
Restart the PC.

7. Reverse the procedure, by following steps 1-3, only this time select System managed size
and click the Set button;



8. Recheck the box next to Automatically manage paging file size for all drives
and exit the windows by clicking the OK button;



9. Confirm all of the remaining windows by click the OK button
and restart the PC once again to take affect.
My System SpecsSystem Spec
Reply

 BSOD 0x000000f4 when I'm playing games and happens randomly often




Thread Tools



Similar help and support threads for2: BSOD 0x000000f4 when I'm playing games and happens randomly often
Thread Forum
BSOD Randomly, mostly after playing a game, error 0x000000f4 BSOD Help and Support
BSOD playing any games, error 0x000000F4 BSOD Help and Support
BSOD playing games(COD BO2 & GW2), error 0x000000f4 BSOD Help and Support
BSOD playing games full screen 0x000000F4 BSOD Help and Support
BSOD randomly after playing games or playing movies ) BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:04 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33