Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD upon exiting sleep 0X00009086 Memory Dump failed

31 Oct 2013   #1
Platypus5

Windows 7 Home Premium 64bit
 
 
BSOD upon exiting sleep 0X00009086 Memory Dump failed

For as long as I can remember having my Dell XPS14z (about a year) it has had a problem where it occasionally crashes going out of sleep. The rate of occurance slowly inched up as time passed until in the past few months, it went out of control. At some points, it crashed 100% of the time exiting sleep.

The computer will wake up, and then one of several things may happen. The computer screen will remain blank; The login page will resume but not register clicks; the login page will resume and register my clicking on my account but it will then freeze; etc. Occasionally the problem resolves itself after a minute, but now, it will eventually go to a blue screen of death, most recently with the error code 0x00009086. (I am not sure if this was always the error code that occured, but it has been the one that is occuring now.)

The memory dump always fails with status 0C000009C. Afterwards, the computer will remember nothing of the crash in the event viewer and simply assume that I improperly shut it down. (Edit: Yes, I did go into the system settings and set the computer to create minidump files)

I have contacted Dell multiple times about this. We have reinstalled the Bios, run Dell Fixit, used a startup option to check the hardware for errors, and reinstalled the graphics cards. Each time, the problem would go away for ~24 hours and then suddenly come back. I have additionally tried using the fsc/scannow and system repair, to no avail.

Does anyone have any experience with this sort of error? I would like to know soon, because otherwise I am slated to reformat my harddrive in late November.


My System SpecsSystem Spec
.
01 Nov 2013   #2
x BlueRobot

 

The NTSTATUS Error Code of 0xC000009C (STATUS_DEVICE_DATA_ERROR) means there is bad sectors on your hard-drive.

Run some hard-drive diagnostics and follow these steps:Find your hard-drive manufacturer and run their tests.

Additional Tests:Post a screenshot of Crystal Disk Info summary:
Quote   Quote: Originally Posted by writhziden
If you have an SSD, make sure the following are up to date:
  • SSD firmware
  • BIOS Version
  • Chipset Drivers
  • Hard disk controller drivers/SATA drivers
  • If you have a Marvell IDE ATA/ATAPI device, make sure the drivers are up to date from the Intel site or Marvell site and not from your motherboard/vendor support site.
Check for any file system errors and bad sectors using Option #2 of:Use this command with Disk Check:

Code:
chkdsk C: /f /r
My System SpecsSystem Spec
02 Nov 2013   #3
Platypus5

Windows 7 Home Premium 64bit
 
 

Okay. I am clearly doing something wrong, as SeaTools just told me that my hard drive doesn't exist...
My System SpecsSystem Spec
.

02 Nov 2013   #4
x BlueRobot

 

Does the hard-drive appear in the BIOS? Have you checked the SATA cables, and tried switching to different SATA ports?
My System SpecsSystem Spec
04 Nov 2013   #5
Platypus5

Windows 7 Home Premium 64bit
 
 

Sorry for late reply. Yes, it does appear in the BIOS when I am booting normally. As for the cables, I don't feel comfortable opening up my laptop, and again, I don't seem to have any issues booting the computer from my harddrive.

Recently, the problem has more or less gone away following the replacement of... the trackpad. It hasn't crashed from sleep in the past few days (It did twice on the 29th, but nothing more) and I am hopeful that the problem has vanished for good this time. I have no idea why, but oh well.
My System SpecsSystem Spec
04 Nov 2013   #6
x BlueRobot

 

Does the hard-drive appear in Crystal Disk Info? I think largely there may be a problem with the hard drive.
My System SpecsSystem Spec
05 Nov 2013   #7
Platypus5

Windows 7 Home Premium 64bit
 
 

Okay. Here is what Crystal Disk has to say.

Attachment 292509

UPDATE: The problem came back in the strangest form yet. After waking it up (I am doing multiple "test sleeps" throughout the day now.) It seemed to boot and go to the login page just fine, but when I reopened my user account, I received a message saying windows explorer had to restart. I said "Okay" and then the message reappeared a moment later. So on and so on. Eventually I said screw it and forced the computer to shut down.

I restarted it and checked the event viewer, and there was an error saying "The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:." A several entries later, the event log said that these errors were successfully repaired. The computer is operating normally as of right now.
My System SpecsSystem Spec
06 Nov 2013   #8
x BlueRobot

 

Could you please upload or post the Event Viewer log created from chkdsk - Check Disk (chkdsk) - Read Event Viewer Log
My System SpecsSystem Spec
08 Nov 2013   #9
Platypus5

Windows 7 Home Premium 64bit
 
 

Sorry for the late reply. As far as I can tell, the system did not automatically run a chkdsk scan after the incident. Instead, both the message about the disk corruption and the two repair messages came from the source "Ntfs."

The two repair things included the following details:

Quote:
25008: Start repair on 11/05/2013 at 16:02:29:571 26084: Deleting an index entry from index 0x55000000014b09 of file 0x102000000000a32. 26084: Deleting an index entry from index 0x55000000014b09 of file 0x102000000000a32. 27094: An index entry of index 0x55000000014b09 points to unused file 0x102000000000a32. 27293: File record 0x102000000000a32 maps to "\Program Files\Common Files\mcafee\AMCore\EM\EMSystemWideDataStore.PDS". 25009: End repair on 11/05/2013 at 16:02:29:571
RepairDataLength 140
RepairData 320A000000000201BB0117000600000000000000000000000000000000000000000000000000000000000000000000000000 0000000000000100000000000000000000000000000000000000000000000000000001000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000
Quote:
25008: Start repair on 11/05/2013 at 16:03:35:032 26084: Deleting an index entry from index 0x3000000011a88 of file 0x74a000000000014. 26084: Deleting an index entry from index 0x3000000011a88 of file 0x74a000000000014. 27094: An index entry of index 0x3000000011a88 points to unused file 0x74a000000000014. 27293: File record 0x74a000000000014 maps to "\Users\William H. La\AppData\Roaming\Dell\Dell Stage\{7309bef0-d881-4262-82dc-fef7e931029d}\tile_event.xml". 25009: End repair on 11/05/2013 at 16:03:35:032
RepairDataLength 140
RepairData 1400000000004A07BB0117000600000000000000000000000000000000000000000000000000000000000000000000000000 0000000000000200000000000000000000000000000000000000000000000000000002000000010000000000000000000000 00000000000000000000000000000000000000000100000000000000000000000000000000000000
I will run my own dskchk later on today.
My System SpecsSystem Spec
08 Nov 2013   #10
x BlueRobot

 

The messages seem related to general cleanup and reorganization of the file system, please post an update after running the chkdsk command yourself.
My System SpecsSystem Spec
Reply

 BSOD upon exiting sleep 0X00009086 Memory Dump failed




Thread Tools




Similar help and support threads
Thread Forum
BSOD's While Exiting Game, Exiting Chrome
I have recently gotten three BSODs, one was from exiting to desktop from Far Cry 3, (the 3/12 10:26 pm) the other was when the computer was afk and not being used (3/13 6:36 PM) and 3/13 10:26pm from exiting Google Chrome. Dump file uploaded. Please help, I really need to get rid of this, :l I...
BSOD Help and Support
Bad_Pool_Header BSOD after exiting sleep mode
I just built a new computer. Everything works fine, except when I wake my computer up from sleep mode, I get a BSOD with BAD_POOL_HEADER. I've attached the zip file as per the sticky. I'm running Windows 7 Home Premium 64 bitMy research suggests this BSOD is caused by a driver issue. Any help...
BSOD Help and Support
BSOD x64 exiting sleep mode
Hello, I have seen this thread on this forums a couple times, however I know all problems can be different. As the tittle says, I usually get a BSOD after sleep mode. The problem has been occurring ever since I went from VGA to DVI-HDMI. As well as getting my H50 Crosair water cooler. I am...
BSOD Help and Support
BSOD after exiting sleep mode
I just got Windows 7 a couple days ago, and whenever I exit sleep mode, my display driver fails and my computer enters the BSOD. I didn't think TOO much of it at first (having to do with exiting sleep mode), because I had this error before in Vista, though it would just happen randomly (once or...
BSOD Help and Support
"Not responding" then memory dump, and failed restart
So, I tried to look over these forums a while before posting, but things didn't really help. I also tried to find my memory dump files to post, but there's no "minidump" file in my windows folder. What happens is I'll most often be browsing in Firefox (I dont do much else recently on this...
BSOD Help and Support
memory dump BSOD
Well... i got this trouble with the BSOD and the memory dump, as alot of people here (i was browsing first to try to understand what was my trouble) But yeah... im not sure what it is, so i came to ask if some of you can help me... there is the minidump i hope it can help, thanks!
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App