Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Driver_irql_not_less_or_equal?

31 Oct 2013   #1
Zenith042

Windows 7 Home Premium x64
 
 
Driver_irql_not_less_or_equal?

I randomly BSOD'd, not doing anything particularly strenuous. I ran a sfc which reported corrupt files which were fixed, but I'm not sure if something else is wrong as well
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high.  This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 0000000000000000, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88002966b5c, address which referenced memory

Debugging Details:
------------------


READ_ADDRESS: GetPointerFromAddress: unable to read from fffff802d3bd8168
unable to get nt!MmPoolCodeStart
unable to get nt!MmPoolCodeEnd
 0000000000000000 

CURRENT_IRQL:  2

FAULTING_IP: 
tcpip!FlpReturnNetBufferListChain+e147c
fffff880`02966b5c 488b01          mov     rax,qword ptr [rcx]

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  VISTA_DRIVER_FAULT

BUGCHECK_STR:  0xD1

PROCESS_NAME:  System

TRAP_FRAME:  fffff880044617a0 -- (.trap 0xfffff880044617a0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80068683b0 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa800d9e27b0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002966b5c rsp=fffff88004461930 rbp=0000000000000000
 r8=0000000000006888  r9=0000000000000000 r10=fffff88000a90000
r11=000000000000029d r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
tcpip!FlpReturnNetBufferListChain+0xe147c:
fffff880`02966b5c 488b01          mov     rax,qword ptr [rcx] ds:00000000`00000000=????????????????
Resetting default scope

LAST_CONTROL_TRANSFER:  from fffff802d38d9769 to fffff802d38da440

STACK_TEXT:  
fffff880`04461658 fffff802`d38d9769 : 00000000`0000000a 00000000`00000000 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`04461660 fffff802`d38d7fe0 : 00000000`00000000 fffffa80`068874c0 fffffa80`0c4f6c00 fffff880`044617a0 : nt!KiBugCheckDispatch+0x69
fffff880`044617a0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x260


STACK_COMMAND:  .bugcheck ; kb

FOLLOWUP_IP: 
tcpip!FlpReturnNetBufferListChain+e147c
fffff880`02966b5c 488b01          mov     rax,qword ptr [rcx]

SYMBOL_NAME:  tcpip!FlpReturnNetBufferListChain+e147c

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: tcpip

IMAGE_NAME:  tcpip.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  51db3c2e

FAILURE_BUCKET_ID:  X64_0xD1_tcpip!FlpReturnNetBufferListChain+e147c

BUCKET_ID:  X64_0xD1_tcpip!FlpReturnNetBufferListChain+e147c

Followup: MachineOwner
---------

3: kd> .trap 0xfffff880044617a0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffffa80068683b0 rbx=0000000000000000 rcx=0000000000000000
rdx=fffffa800d9e27b0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002966b5c rsp=fffff88004461930 rbp=0000000000000000
 r8=0000000000006888  r9=0000000000000000 r10=fffff88000a90000
r11=000000000000029d r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
tcpip!FlpReturnNetBufferListChain+0xe147c:
fffff880`02966b5c 488b01          mov     rax,qword ptr [rcx] ds:00000000`00000000=????????????????



My System SpecsSystem Spec
.
31 Oct 2013   #2
Zenith042

Windows 7 Home Premium x64
 
 
Files

I must have messed up uploading them the first time. Here they are
My System SpecsSystem Spec
Reply

 Driver_irql_not_less_or_equal?




Thread Tools





Similar help and support threads
Thread Forum
driver_IRQL_not_less_or_equal
- x64 Win 7 home premium - the original installed OS on the system? yes - OEM version - What is the age of system (hardware)?- 2 months old - What is the age of OS installation (have you re-installed the OS?) 2 months old and no. - HP P6674Y Pavilion Quad Core Phenom II 2.8Ghz, 8GB DDR3,...
BSOD Help and Support
driver_irql_not_less_or_equal..Pls Help!! :))
I have problems with some driver..my pc shows me driver_irql_not_less_or_equal BSOD. Windows 7 32-Bit OEM Pentium(R) Dual-Core CPU E5700 @ 3.00GHz 2,00 GB RAM NVIDIA GeForce 210 :))
BSOD Help and Support
Driver_IRQL_not_less_or_equal
Hello all, for the past few weeks I've been getting really bad BSOD error. Every few hours or so my PC restarts and the Driver IRQl error pops stating that tcpip.sys is at fault. Updated all drivers and still the same error. I swapped out all parts of my PC just bought a new motherboard for 100$...
BSOD Help and Support
Driver_irql_not_less_or_equal
Hi, ive been getting the blue screen lately and if im right i think ive located the driver responsable, its ymctidu.sys in (C:\Windows\System32\drivers\ymctidu.sys) ive searched it up on google but havent found anything relating to it. ive tried deleting it and it but it said Can't read from...
Drivers
Driver_irql_not_less_or_equal
Windows 7 is. . . - x64 - Not the original OS (had vista-64) - It was one of the discs mailed to you when you bought a qualifying vista system. - The system is about a year old. - The OS is...several months old. I don't remember the exact date of installation. The crash seems to occur...
BSOD Help and Support
Driver_irql_not_less_or_equal
after opening my webcam bluescreen show DRIVER_IRQL_NOT_LESS_OR_EQUAL after restarting my webcam dont work anymore...ive tried system restore, reinstall driver but none of this works...pls help
BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 03:06.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App