Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: 0x00000050 and BSOD SYSTEM_SERVICE_EXCEPTION BSODs (and occassional di


02 Nov 2013   #1
tch

Windows 7 Ultimate x64
 
 
0x00000050 and BSOD SYSTEM_SERVICE_EXCEPTION BSODs (and occassional di

I keep getting a 0x00000050 as well as SYSTEM_SERVICE_EXCEPTION errors on my sister's PC from time to time (can't really pinpoint doing anything at the time of crashes). And if it doesn't crash, occassionally the graphics driver will crash with the following message but Windows 7 will keep runing after displaying this error in the taskbar:
"Display driver intel graphics accelerator drivers for windows 8 stopped working"

I'm a bit surprised by this error, even though I am actually running Windows 7 Ultimate x64 SP1, not Windows 8.

I stupidly installed some drivers for an MSI board I mistook for this (it had been BSODing quite regularly before I made that silly mistake) and have since uninstalled all those (I think), and largely up-to-date with the appropriate Asus B75M-A drivers but the crashes keep happening.

Is the display driver causing these issues? I have done a memory test and that has come back fine with no errors.



Attached Files
File Type: zip tch_02-11-2013.zip (1.88 MB, 2 views)
My System SpecsSystem Spec
.

03 Nov 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

If all are free from errors, uninstall LogMeIn.

Let us know the results.
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 50, {fffffffffffffffe, 0, fffff80002c6932c, 0}


Could not read faulting driver name
Probably caused by : hardware ( nt!NtFreeVirtualMemory+57c )

Followup: MachineOwner
-----------------------------------------------------------------------
BugCheck 1000007E, {ffffffffc0000005, fffff80002c8ccfb, fffff880057f7428, fffff880057f6c80}

Probably caused by : dxgmms1.sys ( dxgmms1!VidSchiWaitForSchedulerEvents+1bc )

Followup: MachineOwner
---------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80002fe7ece, fffff8800abf9ff0, 0}

Probably caused by : memory_corruption ( nt!MiUnmapViewOfSection+12e )

Followup: MachineOwner
---------------------------------------------------------------------------
BugCheck 50, {fffff8004b9228b1, 8, fffff8004b9228b1, 5}


Could not read faulting driver name
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+43801 )

Followup: MachineOwner
------------------------------------------------------------------------
BugCheck 3B, {c0000005, fffff80002caff07, fffff880050baad0, 0}

Probably caused by : ntkrnlmp.exe ( nt!SwapSplayLinks+77 )

Followup: MachineOwner
---------
My System SpecsSystem Spec
05 Nov 2013   #3
tch

Windows 7 Ultimate x64
 
 

Hi,
Memtest showed up some bad RAM with both DIMMs in (only have 2 x 4gb DIMMs).

The system doesn't crash after taking the bad DIMM out, but the good DIMM does produce *one* error in Prime95 doing the "Blend" test with it being the only DIMM in the first slot. After 2 hours, it produced a "FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file." error. Can that be ignored? It's not a gaming system at all. I will get the owners of the PC to test it out over a few days to confirm, but it was crashing daily with both DIMMs in.

The bad DIMM generated errors right away when ran by itself in the same, first slot so I'm pretty sure that's the problem.

The Fumark test had no issues (ran it at a lower resolution to get higher FPS).
My System SpecsSystem Spec
.


05 Nov 2013   #4
Arc

Microsoft Community Contributor Award Recipient

Windows 7 Home Premium 64 Bit SP 1
 
 

As you can identify the faulty DIMM, dont use it.

Also, Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy.
My System SpecsSystem Spec
Reply

 0x00000050 and BSOD SYSTEM_SERVICE_EXCEPTION BSODs (and occassional di




Thread Tools



Similar help and support threads for2: 0x00000050 and BSOD SYSTEM_SERVICE_EXCEPTION BSODs (and occassional di
Thread Forum
Occassional BSOD during Hibernation BSOD Help and Support
BSOD, 'IRQL_NOT_LESS_OR_EQUAL', very occassional BSOD Help and Support
BSODS : BAD_POOL_HEADER and SYSTEM_SERVICE_EXCEPTION BSOD Help and Support
Random BSODs, SYSTEM_SERVICE_EXCEPTION (usually) BSOD Help and Support

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:26 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App
  

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33