Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Random BSODs, new PC build, first time builder

21 Jun 2016   #11
VinceS

Windows 7 Ultimate 64
 
 

No worries a0, I figured as much - also the problem I had there was pretty unique and not too easy to fix, as it turned out. So the people reading it had nothing to say, fair enough! My chipping in to THIS thread was basically to point out the bleeding obvious - this is not a babysitting service and the simple fact that anybody (like your good self) is kind enough to help is just brilliant. But by the same token this OP needs to run the "personal responsibility" thing down first - sure his new logs may show some glaring issue, but I wouldn't be asking myself unless I had a fair crack at it, which as the bare minimum would be doing what I was told to do in the first place! I just pointed out that was a pretty legitimate request.

More power to ya...


My System SpecsSystem Spec
.
21 Jun 2016   #12
ImmortalOne

Windows 7 Professional 64-bit
 
 

VinceS, my initial issue was resolved without reverting back to the earlier NVidia driver set... and I stayed BSOD free for just over two years. It's been only recently that I've had the issues again... and right after installing Dell Webcam central as mentioned above. I would think if it were the graphics driver set then I would've been having issues all along, not just randomly again after two years. I'm not disputing as I have no idea how to interpret the diagnostics logs, I'm just asking. I also have no issue with reverting to an older driver set IF that is indeed what is causing my latest BSODs.
axe0, I wasn't aware of that, thank you for the tip. I had only reposted in my original thread due to Arc's last comment and due to the attention notice at the top of the BSOD Help and Support page.
Is it your consensus that it's the NVidia driver set as well based on my latest diagnostics log?

Thank you both for your replies as well.
My System SpecsSystem Spec
21 Jun 2016   #13
axe0

Windows 10 Pro
 
 

It is normal to create a new thread instead of replying to your own thread when there is quite a time difference between the last post and the new post, a problem is in 99% of the situations never the same.
My System SpecsSystem Spec
.

21 Jun 2016   #14
ImmortalOne

Windows 7 Professional 64-bit
 
 

I had thought so as well, that attention notice just threw me off.
My System SpecsSystem Spec
21 Jun 2016   #15
VinceS

Windows 7 Ultimate 64
 
 

Mate sometimes you just need the right tool - maybe this one should come out for the big jobs:


Attached Images
Random BSODs, new PC build, first time builder-sigpic451597_2.png 
My System SpecsSystem Spec
21 Jun 2016   #16
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by VinceS View Post
Mate sometimes you just need the right tool - maybe this one should come out for the big jobs:
If the utilization is proper, size does not matter.
My System SpecsSystem Spec
21 Jun 2016   #17
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by ImmortalOne View Post
Still having BSOD issues. Sometimes days or weeks apart, and sometimes it will happen several times within an hour. Here's another recent log file. Any help would be greatly appreciated.
I got unsubscribed from a lot of old threads.

From 2 of your 3 latest crash dumps ....
Code:
BugCheck 3B, {c0000005, fffff80003590191, fffff8801409b9f0, 0}

Probably caused by : hardware ( nt!CmpCompareInIndex+21 )

Followup:     MachineOwner
---------
Code:
BugCheck 1A, {41287, 11, 0, 0}

Probably caused by : hardware ( nt! ?? ::FNODOBFM::`string'+3bfd5 )

Followup:     MachineOwner
---------
.... hardware issue is detected with two different bugcheck codes. So let us conduct the basic hardware tests.

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.
Take a camera snap of the memtest86+ screen and let us see it.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark
Take a screenshot of the furmark window before closing it. Upload the screenshot for us. Also let us know if you have experienced any crash/BSOD and/or artifacts during the test.

Stress test the CPU.
Hardware - Stress Test With Prime95
It saves the result as a .txt file in the prime95's folder. Upload the file for us.

Check if the Power Supply Unit (PSU) supplying adequate power to the computer or not.
eXtreme Power Supply Calculator
Also let us know the wattage of the installed PSU.

Is the computer hot? Report us the heat of the computer after a couple of hours of your normal usage. Upload a screenshot of the summery tab of Speccy. Alternatively, you can publish a Speccy snapshot too: Speccy - Publish Snapshot of your System Specs .

Please make your reply as much documented as possible. You may post the results one after one, or you may post them in a single post.
My System SpecsSystem Spec
Reply

 Random BSODs, new PC build, first time builder




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
Random BSODs for quite some time now
I've been having random BSODs for quite some time now, some 6 months in the past (or they appear to me to be random). However, they happen most frequently while browsing (or just having my browser open) or using multiple applications at once with the browser open. I like to have many tabs open in...
BSOD Help and Support
Seemingly random BSODs on new build
Thank you in advance
BSOD Help and Support
BSODs random since build - various bugcheckcodes
Dear Friends, I have been experiencing BSODs randomly from time of build. SFdebug files are attached. Running: New Build - all new components Windows 7 Home Premium 64bit full retail - build 6.1.7601 - SP1 and all updates Motherboard ASUS P8Z77-V
BSOD Help and Support
Random BSODs in brand new build
Hello. Just put together new HTPC and it is randomly crashing. OS: Windows 7 64-bit, OEM Retail Processor: AMD A8-3850 Graphics: Onboard MOBO: ASRock A75M-ITX Memory: Mushkin Silverline 8GB (2x4) HD: Western Digital Caviar Black 1 TB (WD1002FAEX) Blu-Ray/DVD: Lite-On internal (IHES112-04)
BSOD Help and Support
Random BSODs on new custom build with AMD A8 APU
Hi all, hope someone can help as this has me stumped. I built a new PC with an AMD APU A8 Quad 3GHz using the onboard graphics in the APU with Windows 7 64bit. It was built about 1 month ago and the problem began as soon as windows was installed with no software other than drivers. Since it...
BSOD Help and Support
Random occasional BSODs on new W7 64-bit build
This is my first post so I hope I've done it correctly. I bought a retail W7 64-bit in September and installed it on my 8 month old PC which previously had run Windows XP Pro SP3 without a glitch. Almost immediately I started getting random BSODs but persevered for 10 days or so but, knowing...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:36.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App