Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD playing Rome 2 Total War, I believe error is 116

06 Dec 2013   #11
lordzeus330

Windows 7 Home Premium 64bit
 
 
I'm Back :)

I am heartily sorry for not being able to respond the past 3-4 weeks. My schooling was relentlessness with its issuing of school projects. I just managed to complete the furmark test at the settings that were in the tutorial and I ran it for an hour. My GPU temp leveled out at 64 degrees Celsius jumping up to 65 and down to 63 every once in a while (fan was at 45%). I as well maintained an avg. of 5 fps. Earlier I mentioned how my GPU was changing temps in post #9 I instead meant my CPU. Though I gauged these temps using game-booster by iobit so I do not believe them to be accurate. The reason being because CPUID says my CPU temps to be at 28 degrees Celsius.
And I would like to thank you for all the support you've been providing me and everyone else on these forums.


My System SpecsSystem Spec
.
11 Dec 2013   #12
x BlueRobot

 

Welcome lordz

Code:
BugCheck 116, {fffffa80095fa4e0, fffff88002e0ae80, 0, 2}

Probably caused by : atikmpag.sys ( atikmpag+ae80 )
The second parameter contains the address of the instruction which supposedly caused the problem.

Code:
atikmpag+ae80
fffff880`02e0ae80 4883ec28        sub     rsp,28h
I would update your AMD graphics card driver again, since there has been a few updated WHQL versions released:

Code:
2: kd> lmvm atikmpag
start             end                 module name
fffff880`02e00000 fffff880`02e9e000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Tue Oct 08 13:27:46 2013 (5253FA42)
    CheckSum:         0009C10E
    ImageSize:        0009E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Latest AMD Catalyst Video Driver for Windows 7
My System SpecsSystem Spec
14 Dec 2013   #13
lordzeus330

Windows 7 Home Premium 64bit
 
 

I though I would tell that recently I had a bsod that seemed to occur whenever I logged on. I believe that iobit may have really messed up my computer because when I restarted my PC and windows update installed an update. My computer then would bsod to 3b if I remember correctly. Since this happened I did a complete factory reset and only saved files that were in the my documents folder, so I will update my graphics drives and attempt to play Rome 2.
Thanks for the response!
My System SpecsSystem Spec
.

14 Dec 2013   #14
lordzeus330

Windows 7 Home Premium 64bit
 
 

All right I attempted to play my old saved game from before I reset the PC and I bsod three minutes in. I've used the amddriverdownloader that gets the latest version for my PC I think. Regardless I have my new bsod in the attachments.
My System SpecsSystem Spec
01 Jan 2014   #15
lordzeus330

Windows 7 Home Premium 64bit
 
 
New Year New Problems

I just received civilization brave new world for Christmas and I got the same the same bsod of 116 while playing. I have just recently updated my drivers to the current version and that was after the bsod. Though i have noticed that when i was using the sf diagnostic tool the screens that would say something has been retrieved would be black. Then today when I was playing civ 5 the terrain would turn black for a brief second a couple of times then stop. Then when I use notepad and hit backspace it does not delete the word but I have to hit another letter and to remove the previous letter.
My System SpecsSystem Spec
18 Jan 2014   #16
lordzeus330

Windows 7 Home Premium 64bit
 
 

Quote   Quote: Originally Posted by x BlueRobot View Post
Welcome lordz

Code:
BugCheck 116, {fffffa80095fa4e0, fffff88002e0ae80, 0, 2}

Probably caused by : atikmpag.sys ( atikmpag+ae80 )
The second parameter contains the address of the instruction which supposedly caused the problem.

Code:
atikmpag+ae80
fffff880`02e0ae80 4883ec28        sub     rsp,28h
I would update your AMD graphics card driver again, since there has been a few updated WHQL versions released:

Code:
2: kd> lmvm atikmpag
start             end                 module name
fffff880`02e00000 fffff880`02e9e000   atikmpag T (no symbols)           
    Loaded symbol image file: atikmpag.sys
    Image path: atikmpag.sys
    Image name: atikmpag.sys
    Timestamp:        Tue Oct 08 13:27:46 2013 (5253FA42)
    CheckSum:         0009C10E
    ImageSize:        0009E000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
Latest AMD Catalyst Video Driver for Windows 7
Alright I have received another BSOD while playing Rome and I have also found that my GPU is recommended to have at least 500 watts and my computer's PSU has only 250 watts so chances are I am not getting enough wattage. For now would running my games in directx 9 instead of directx 11 reduce on wattage consumption?

I have found running it in directx 9 causes no bsods, will have to save up and buy a better PSU.
My System SpecsSystem Spec
Reply

 BSOD playing Rome 2 Total War, I believe error is 116




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing Civilization IV, Rome - Total War and using browsers
The computer is having the same problem all the time not only playing games but also browsing the web. Sometimes it happens as often as two, three times a minute but mostly it happens once every five minutes. The log information is as follows: Quote Source Windows Summary
BSOD Help and Support
BSOD playing Total War Rome II, error 0x00000101
Hello to everyone in SevenForums, this is my first post in this forum but its not the first time Ive seeked help for windows related problems here. So just let me express my gratitude to you all. Now Ill proceed explaining my most recents troubles. Everytime I try playing TWRII, usually...
BSOD Help and Support
BSOD playing Total War: Rome 2, error 0x124
While playing Total War: Rome 2, my computer froze after hitting End Turn within the game. My PC restarted itself and I received the following BSOD info: Bugcheck code: 0x124 (0x0, 0xFFFFFA80116C6038, 0x0, 0x0) Error: WHEA_UNCORRECTABLE_ERROR. Please advise as I had just bought this game but...
BSOD Help and Support
BSOD after Total War Rome II install
My son installed this newly bought game on his laptop. He leaves for college in 2 days and it has significant problems. He says that he actually played the game for a bit, left the laptop in standby mode for a few hours, and came back to the BSOD. This is not a new machine (he is going to be a...
BSOD Help and Support
BSOD playing a battle in Rome 2 total war
Hi Folks, My PC BSOD when i was playing a battle in Rome 2 total war - this is the first time this has happened since i built the computer initially -here is the error code - I have also attached the information from the SF diagnostic tool also Problem signature: Problem Event...
BSOD Help and Support
BSOD playing Total war Rome 2, 0x124
Hello any help is appreciated. SF diagnostic tool results attached On Sun 08/09/2013 20:00:26 GMT your computer crashed crash dump file: C:\Windows\Minidump\090813-21980-01.dmp This was probably caused by the following module: ntoskrnl.exe (nt+0x4ADE0C) Bugcheck code: 0x124 (0x0,...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:02.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App