Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

16 Nov 2013   #1
chuckftl

Windows 7 Ultimate-64bit 6.1.7601 Service Pack 1
 
 
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0

Greetings -

This computer runs a program named HAUPTWERK, which generates pipe organ sounds based on MIDI input. I leave this computer on all the time with the HAUPTWERK program running. Recently, the BSODs have started - usually overnight and always when no MIDI activity is happening and the computer should be idle. I don't know how to determine which driver is failing and would appreciate some guidance.

DRIVER_POWER_STATE_FAILURE
BUG CHECK: 0x0000009f
Parm 1 = 00000000`00000003
Parm 2 = fffffa80`0d506a10
Parm 3 = fffff800`0457d3d8
Parm 4 = fffffa80`10a61b10
Caused by driver: ntoskrnl.exe
Address = ntoskrnl.exe+75bc0
Microsoft Version: 6.1.7601.18247 (win7sp1_gdr.130828-1532)

Dell Optiplex 790
x64
BIOS: Dell A07, 9/10/11
Memory 16GB

Audio Devices
M-Audio Delta 1010LT
M-Audio FW 410 (this is the most recent device added, although it has been installed for a while before the BSOD started happening)

I have attached the output from the SF Diagnostic Tool


Thanks!
chuck


My System SpecsSystem Spec
.
17 Nov 2013   #2
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi Chuck.

A stop 0x9F BSOD is caused by Advanced Configuration and Power Interface (ACPI), the power management options. Technically it is termed as DRIVER_POWER_STATE_FAILURE. That means, some driver is failing to act or response properly during the power transitions.

The failing drivers, as I am noticing are
  • mafw.sys, Service for M-Audio FireWire (c:\windows\system32\drivers\mafw.sys); a component of your M-Audio Delta 1010LT sound card.
  • iastor.sys, Intel AHCI Controller (c:\windows\system32\drivers\iastor.sys); Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.
Now let us think what should be done these these drivers.

For the M-Audio stuff, I am failing to suggest updates, as there is no feasible update as I am seeing in M-AUDIO - Drivers and Software Search.
Attachment 293933
In that situation, you should try removing that card.

Get rid of intel rapid storage. First uninstall it from Control Panel > Programs and Features. Then Uninstall the driver from device manager.
  1. Right click on "my computer" icon and click "manage" on the context menu.
  2. It will open the "computer management" window.
  3. Select "Device Manager" in the left pane, It will list all the existing devices up.
  4. Expand "IDE ATA/ATAPI controllers" by clicking on the triangle in front of it.
  5. Select one Intel device item under it, right click, uninstall.
  6. Continue the process for all Intel items under "IDE ATA/ATAPI controllers"
  7. Now restart the computer. At restart, windows will auto configure the appropriate native system driver.
Alternatively, you may try one more thing .... as it is ACPI related ....
Code:
Device object (fffffa80101a8050) is for:
 InfoMask field not found for _OBJECT_HEADER at fffffa80101a8020
 \Driver\usbehci DriverObject fffffa80101879f0
Current Irp 00000000 RefCount 0 Type 00000004 Flags 00000040
DevExt fffffa80101a81a0 DevObjExt fffffa80101a9c00 
ExtensionFlags (0x00000800)  DOE_DEFAULT_SD_PRESENT
Characteristics (0x00000100)  FILE_DEVICE_SECURE_OPEN
AttachedTo (Lower) fffffa800d4db8c0 \Driver\ACPI
Device queue is not busy.
Disable hibernate. Follow Hibernate - Enable or Disable. Disable sleep too. As it is a desktop computer, hibernate and sleep is not needed at all.

If the issues are still there even after disabling hibernate and sleep, remove the M-Audio sound card and uninstall Intel Rapid Storage.

Let us know the results.
My System SpecsSystem Spec
17 Nov 2013   #3
chuckftl

Windows 7 Ultimate-64bit 6.1.7601 Service Pack 1
 
 

Thanks for the quick reply. I have disabled sleep and hibernate. Will wait a few days to see what happens.

thanks again
My System SpecsSystem Spec
.

Reply

 BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
DRIVER_POWER_STATE_FAILURE ntoskrnl.exe + 75bc0
I've had this machine for six months and today (10/3) marks the first BSOD I've had, which occurred while I was browsing online. It may seem like I'm jumping the gun on this ony one BSOD but I couldn't find anything on the forum that seemed to specifically match this and I was thinking it might...
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE crash at ntoskrnl.exe+75bc0
I get the same BSOD every time. Usually, almost exclusively when I shut the laptop and it is supposed to sleep. What happens is, it turns off. I have attached the BSOD file. I am guessing my power supply is running into problems. Tell me I am wrong.... please?
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0
Hi all, Last few days I'm experiencing BSOD. After couple of days of browsing, searching, updating drivers etc. I find myself powerless. Please, can anyone help? Thank you in advance. Jonci
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0
Hallo everyone, I am experiencing again this DRIVER_POWER_STATE_FAILURE 0x0000009f 00000000`00000003 fffffa80`073f0060 fffff800`00b9c3d8 fffffa80`06b8d540 ntoskrnl.exe+75bc0 6.1.7601.18247 (win7sp1_gdr.130828-1532)
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe+75bc0
Hi, Good Day Just got my HP ZBOOK 14 a month ago, since day one I am keep getting BSOB of DRIVER_POWER_STATE_FAILURE BUG CHECK: 0x0000009f Parm 1 = 00000000`00000003 Parm 2 = fffffa80`0d506a10
BSOD Help and Support
BSOD DRIVER_POWER_STATE_FAILURE ntoskrnl.exe +75bc0
This has come and gone for a long time. I ran a registry repair tool that seemed to fix it for about a month, but now it's back with a vengeance (4 BSODs today). Latest dump attached. Any help would be greatly appreciated.
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:41.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App