Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Bsod 000000a irq

19 Nov 2013   #1
helperd

64
 
 
Bsod 000000a irq

Just started happening more frequently the past couple weeks. System is about 6 months old. I'm assuming it has to do with a device driver, but don't recall any significant changes during that time frame.
Today I just went through the device manager to verify nothing showed as an error, then ran windows updates to update the logitech software. Finally ran lenovo update to update the network drivers.

I've attached the dump/logs


My System SpecsSystem Spec
.
19 Nov 2013   #2
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Welcome to Seven Forums.
Note   Note
Do not start the trial version of MalwareBytes
Update this driver:
e1c62x64.sys Tue Dec 21 15:30:56 2010 (4D1073D0)
Intel(R) 82579V Gigabit Network Connection driver
Driver Reference Table - e1c62x64.sys
  • System File Checker
    • The SFC /SCANNOW Command - System File Checker scans the integrity of all protected Windows 7 system files and replaces incorrect corrupted, changed/modified, or damaged versions with the correct versions if possible. If you have modified your system files as in theming explorer/system files, running sfc /scannow will revert the system files to it's default state.
  • Run Disk Check in Windows 7
    • Run this on your Hard Drive(s). This will show you how to run Check Disk or chkdsk in Windows 7 to check a selected hard disk for file system errors and bad sectors on it. With both boxes checked for all HDDs and with Automatically fix file system errors. Post back your logs for the checks after finding them using Check Disk (chkdsk) - Read Event Viewer Log
  • Test and Diagnose RAM issues with MEMTEST86+
    • Pay close attention to Part 3 of the tutorial "If you have errors". Take the test for at least 7-10 passes. It may take up to 22 passes to find problems.
      • Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold. RAM - Test with Memtest86+
Bugcheck Summary:
Code:
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Nov 19 23:25:10.551 2013 (UTC + 6:00)
System Uptime: 0 days 2:25:28.678
BugCheck A, {8, 2, 0, fffff8000301676c}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23ed7 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Nov 19 20:58:40.729 2013 (UTC + 6:00)
System Uptime: 0 days 18:32:23.334
BugCheck A, {0, 2, 1, fffff8000306db42}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23ed7 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Nov 19 02:24:48.376 2013 (UTC + 6:00)
System Uptime: 0 days 1:00:19.714
BugCheck D1, {68, 2, 1, fffff88005a95f60}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23f60 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Nov 19 01:23:28.849 2013 (UTC + 6:00)
System Uptime: 0 days 0:12:47.589
BugCheck D1, {68, 2, 1, fffff88004695f60}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23f60 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Tue Nov 19 01:09:39.510 2013 (UTC + 6:00)
System Uptime: 2 days 23:16:34.285
BugCheck D1, {90, 2, 1, fffff8800475bfd3}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23fd3 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  dwm.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sat Nov 16 01:51:59.430 2013 (UTC + 6:00)
System Uptime: 0 days 0:29:48.888
BugCheck D1, {68, 2, 1, fffff88003160f60}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23f60 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Sat Nov 16 00:32:20.382 2013 (UTC + 6:00)
System Uptime: 1 days 20:30:58.586
BugCheck D1, {90, 2, 1, fffff88005a2ffd3}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23fd3 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  SearchIndexer.
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Wed Nov 13 21:04:34.767 2013 (UTC + 6:00)
System Uptime: 0 days 0:01:39.704
BugCheck D1, {68, 2, 1, fffff88005223f60}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23f60 )
BUGCHECK_STR:  0xD1
PROCESS_NAME:  Skype.exe
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Debug session time: Wed Nov 13 21:02:10.944 2013 (UTC + 6:00)
System Uptime: 0 days 0:05:18.674
BugCheck A, {8, 2, 0, fffff800035ee76c}
*** WARNING: Unable to verify timestamp for e1c62x64.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c62x64.sys
Probably caused by : e1c62x64.sys ( e1c62x64+23ed7 )
BUGCHECK_STR:  0xA
PROCESS_NAME:  System
ииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииииии``
My System SpecsSystem Spec
Reply

 Bsod 000000a irq




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD with Bug Check: 000000A
This is an ongoing problem that I have been having with my Windows 7 Laptop. I believe, it crashed with Bug Check: 000000A instead of going into sleep mode. Here is my dump logs.
BSOD Help and Support
BSOD while gaming or browsing web. Error 000000A
So basically, I have been getting BSODs for a while and I am not able to find how to fix it. I attached the SF Diagnosis zip. I am not sure what other information to provide as I am not very knowledgeable on Windows issues. If any more info is needed I will try to check back frequently. Thanks for...
BSOD Help and Support
Random BSOD 000000a ntoskrnl.exe
Just to lay the story right. I just bought and built up this PC last Oct 2012, it does not have any problems till Jan when it starts to BSOD during WoW gameplay only. I went thru many rounds of troubleshooting, reformatting before I decided to see if removing one of my 2 4GB RAM helps. Luckily...
BSOD Help and Support
BSOD on login. STOP:000000a irql_not_less_or_equal
Hello, This is my first post. I am having an issue where upon logging in I see nothing besides a black screen and my cursor, eventually my desktop loads and then I get the aforementioned BSOD stop error. I have configured my computer to create a small memory dump as seen in the posting...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

й Designer Media Ltd

All times are GMT -5. The time now is 20:16.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App