New
#1
Sudden BSOD, the computer was idle
My computer was idle and i was AFK and after a few minutes i noticed that it restarted and the BSOD message popped up.
My computer was idle and i was AFK and after a few minutes i noticed that it restarted and the BSOD message popped up.
Hi lanth94.
The BSOD is storage related.
Test your Western Digital Scorpio Blue SATA II 250GB with Data Lifeguard Diagnostic for Windows.Code:******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* KERNEL_DATA_INPAGE_ERROR (7a) The requested page of kernel data could not be read in. Typically caused by a bad block in the paging file or disk controller error. Also see KERNEL_STACK_INPAGE_ERROR. If the error status is 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185, it means the disk subsystem has experienced a failure. If the error status is 0xC000009A, then it means the request failed because a filesystem failed to make forward progress. Arguments: Arg1: c057ffd0, lock type that was held (value 1,2,3, or PTE address) Arg2: c0000185, error status (normally i/o status code) Arg3: 54a8b820, current process (virtual address for lock type 3, or PTE) Arg4: afffaff0, virtual address that could not be in-paged (or PTE contents if arg1 is a PTE address) Debugging Details: ------------------ ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error. DISK_HARDWARE_ERROR: There was error with disk hardware BUGCHECK_STR: 0x7a_c0000185 CUSTOMER_CRASH_COUNT: 1 DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT PROCESS_NAME: System CURRENT_IRQL: 0 TRAP_FRAME: 8a91ba04 -- (.trap 0xffffffff8a91ba04) ErrCode = 00000000 eax=afffaff0 ebx=ad413340 ecx=001caff0 edx=00000000 esi=ad413340 edi=ad413008 eip=82e47c44 esp=8a91ba78 ebp=8a91ba88 iopl=0 nv up ei pl nz na po nc cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010202 nt!HvMarkCellDirty+0x220: 82e47c44 8b00 mov eax,dword ptr [eax] ds:0023:afffaff0=00000000 Resetting default scope LAST_CONTROL_TRANSFER: from 82cfe60a to 82d26d10
Make it sure that all the screws are properly screwed to the HDD. Make it sure that the HDD and the SATA cable ... neither of them dont have a bent pin. Re-seat the SATA and power. If possible, change them. Also try to apply the SATA cable to another unused SATA port on the motherboard.
Let us know the results.