Many BSOD's in the last time, error 1000007e


  1. Posts : 1
    Windows 7 Home Premium x64
       #1

    Many BSOD's in the last time, error 1000007e


    Hello,
    since the last few days, i get many BSOD's, most of the time while playing BF3 or BO2.

    BCCode: 1000007e
    BCP1: FFFFFFFFC0000005
    BCP2: FFFFF80002AE654A
    BCP3: FFFFF880029E1D38
    BCP4: FFFFF880029E1590
    OS Version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1

    I attached the file, created by the SF Diagnostic Tool.

    Thanks in advance.
      My Computer


  2. Posts : 15,026
    Windows 10 Home 64Bit
       #2

    Welcome to the forum.

    Please remove Kaspersky & Sandboxie for testing purpose.

    Microsoft Security Essentials is recommended from a strict BSOD perspective, compatibility & stability compared to other antiviruses/internet security software. It is free and lightweight:-

    Do not start the free trial of Malware Bytes; remember to deselect that option when prompted.

    Reduce items at start-up. Nothing except anti-virus is required:


    Perform a System File Check:
    • Click on the
    • Type CMD on Search
    • Left click and Run as Administrator
    • Type SFC /scannow

    Full tutorial here:

    Make scans with the following:

    Kaspersky TDSSKiller

    ESET online scanner

    Disk Check on your hard disk for file system errors and bad sectors on it:

    Post screenshot(s) of your Hard Drive(s) using Crystal Disk Info Software:

    Run a Hard Drive test:

    If this does not provide stability. Test RAM.

    Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.


    The goal is to test all the RAM sticks and all the motherboard slots.

    Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

    If you get errors, stop the test and continue with the next step.

    1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
    *Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
    If this stick passes the test then go to step #3.

    2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
    *If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
    *If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
    3. Test the next stick of RAM (stick #2) in the next motherboard slot.
    *If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
    *If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
    4. If you find a stick that passes the test, test it in all the other motherboard slots.

    If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

    In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
       Information
    Errors are sometimes found after 8 passes.

       Tip
    Do this test overnight, before going to bed.


    Check for heating issues using Speccy or HWmonitor

    Upload a screen shot: Screenshots and Files - Upload and Post in Seven Forums

    Let us know the results.
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 14:58.
Find Us