Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Motioninjoy BSOD while playing SSF4 0x0000010D

22 Nov 2013   #1
xPigx

Windows 7 Ultimate x64
 
 
Motioninjoy BSOD while playing SSF4 0x0000010D

Hello guys, im new here!

I'm experiencing a BSOD crash while playing SSF4 (used to have only at this game).

After i tried everything, I formatted, and now windows is not saving minidump files.

Before formatting I used nirsoft Bluescreenview to see what i could gather from the problem, and i found

ntoskrnl.exe
wdf01000.sys
win32k.sys (sometimes only)
mijxfilt.sys (sometimes ony too)

That's all i can remember, now whenever I have the blue screen the stop says 0x0000010D stop cause.

I've tried everything!

Any help would mean everything for me!


https://www.dropbox.com/sc/k798jcods666ovq/3B_tjsqlan


My System SpecsSystem Spec
.
23 Nov 2013   #2
xPigx

Windows 7 Ultimate x64
 
 

Hello, i downgraded the version of 7.10001 to 6.00004 (i guess something like that)
My BSOD's until now stopped, BUT i still have the controller disconnecting every round of playing SSF4 (super street fighter 4)

The controller also disconnects in FF7 (a lot lesser)

I still did not have any BSOD's yet, but i'll keep this thread updated,
Any ideas how to not disconnect controller every round?

PS: everytime it disconnects it makes the windows sounds of pulling out an USB and putting one in,
I've also tried changing USB ports.
My System SpecsSystem Spec
23 Nov 2013   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Hi xPigx.

The crash dump that you uploaded does not say it precisely that the BSOD is caused by mijxfilt.sys. But we know that it is problematic sometimes, and downgrading the driver is the appropriate step there. So what you have done is a perfect step.

If you think the sudden disconnection may be a driver/software issue, you may enable Driver Verifier to monitor the drivers. It will point the failing driver out.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
.

24 Nov 2013   #4
xPigx

Windows 7 Ultimate x64
 
 

Hi Arc,

I've done what you asked (running verifier) for but could not run into the desktop

Had an early BSOD with the NVLDDMKM.sys

Here it is the SF file.

I've tried a few times, disabling and toggling in again but never did work.

Any ideas?

PS: I had a NVLDDMKM.SYS BSOD before,and,i had a GTX 560 Ti. After it,I put my GTX 560 Ti in another computer and it worked like a charm so i sold to a friend and got a gtx 570 instead, It has never brought me any trouble yet, the NVLDDMKM.sys BSOD stopped, but after seeing the verifier accusing NVLDDMKM.sys again, could it possibly be the MB?

PS,2 :Still can't use my controller, keeps disconnecting every round i play in Street Fighter 4.
My System SpecsSystem Spec
25 Nov 2013   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

The zip does not contain any crash dump.

If you cannot run DV successfully, then fee up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Now enable DV again. Make it sure that you are not selecting any driver provided by "microsoft" and "unknown". Hopefully it will go to desktop before it crashes and there will be recorded crash dump.

nvlddmkm.sys is the display driver, and teh installed version is 331.28 WHQL. As a test, you may install an earlier version which is known to be stable. Install the NVIDIA DRIVERS 314.22WHQL only.
  • Uninstall All nvidia items in Control Panel > Programs and features
    • 3D Vision Control Driver
    • 3D Vision Driver
    • Graphics Driver
    • HD Audio Driver
    • PhysX
    • nvidia Update
    (Are you using nvidia chipset drivers? If so, dont uninstall anything other than those are listed).
  • Now follow Drivers - Clean Left over Files after Uninstalling
  • Download 314.22 WHQL. While installing, Select Custom (Advanced) install. In the next page, follow this settings:

If it still BSODs with nvlddmkm.sys, we will do some further things.
My System SpecsSystem Spec
26 Nov 2013   #6
xPigx

Windows 7 Ultimate x64
 
 

Ok, will do tomorrow and put the update here, thanks Arc!

EDIT:
Hey Arc and guys, I'm sorry i did not answer, i solved my problem!

The BSOD was caused by Motioninjoy new driver, so i downgraded to 6.0003 and the controller disconnecting was the USB cable, in the end of it near the connection to the PC was malfunctioning.

I'm sorry i did not check on the NVLDDMKM problem Arc,

I hope everyone who has the same problem downgrade to an older version!

Thanks for the help!
My System SpecsSystem Spec
Reply

 Motioninjoy BSOD while playing SSF4 0x0000010D




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD playing Fifa 15, 0x0000010d
Hello, i get sometimes a BSOD when i play Fifa 15, my Xbox 360 Wired Controller for Windows often gets logged in and logged out (hear it, du dum du dum), i see it on the status circle of the controller. Sorry for my bad english, thank you for your help :) Greetings rpm14
BSOD Help and Support
BSOD playing videogames with a controller, bug check code 0x0000010d
Hello. I have recently built a new PC, but since five days ago I'm getting some kind of BSOD that I cannot solve. I would like to get some help, I'm pretty clueless about PCs but I suspect it might be my Motioninjoy driver, since I use a PS3 controller on my computer. It always happens while I'm...
BSOD Help and Support
BSOD playing games with PS3 controller. Error 0x0000010d ntoskrnl.exe
This has happened twice now. Once while playing a Dreamcast emulator nullDC and another time playing Super Street Fighter 4 Arcade. I think Chrome was running in the background during both. I used this method https://www.youtube.com/watch?v=60QQGHEujw4 to be able to use my DualShock3 controller...
BSOD Help and Support
BSOD Playing several games | Error 0x0000010D
The thread title pretty much says it all. I just recently built this computer with a friend's help. I believe I have updated all my drivers and windows updates, including optional ones. As for what the BSOD says... The windows driver framework has detected that a violation has occurred....
BSOD Help and Support
BSOD playing DiRT3, error 0x0000010D
Hey there, i'm getting a lot of BSOD's while 5 minutes of playing DiRT3, here's the dump, thanks for any feedback! also, here's a foto of the bsod: http://dl.dropbox.com/u/13954549/2012-04-09%2019.54.22.jpg EDIT: I'm running on a HP dv7 pavillion 3090-ep on a i7 720Q, geforce GT 230m
BSOD Help and Support
BSOD - Associated with MotioninJoy tool with PS3 Controller
Hi, I've recently connected my PS3 controller to my PC, and used MotioninJoy Gamepad tool, so I've been playing with my PS3 controller, but sometimes, like when I disconnect it and try to play wireless, my pc just crashes and a BSOD pops. I ask kindly for help. Sys info: - x86 (32-bit) or x64 ?...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App