Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD help (bad pool header & irql less or not equal)

02 Jan 2014   #21
adabisi

Windows 7 Ultimate 64 bit
 
 

Hey!

Actually, couple of seconds after I've installed all four modules tougher I got two crashs of bad pool header. I got it back to the store, where they changed them for new ones.

As i was typing this message, got another crash " An attempt was made to write to read-only memory"
(I was going to write how optimistic I am now).


My System SpecsSystem Spec
.
02 Jan 2014   #22
YoYo155

Windows 10
 
 

Hmm that is almost too coincidental.
I want to scan for possible infections and running Driver Verifier.

Please scan for possible infection and file corruption, perform the scans in the order they appear in.
  • Download TDSS-Killer and scan for rootkits. Please upload the TDSSKILLER log which will be located in the C:\ partition once you boot back in normal mode.
  • Download AdwCleaner, it might ask you to download an updated version, do so. launch the program and click the Scan button, once it's finished go through the Folders tab and Files tab and see if it has detected any personally important files that you want to keep for now will deal with those later. Please upload the log file which will be created after removal procedure in a folder C:\AdwCleaner, if you are unable to find the log file simply launch AdwCleaner again and click the Report button.
  • Download Malwarebytes and DON'T activate the trail (uncheck the box at the end of the installation)
  • Follow this tutorial on how to use the SFC/ SCANNOW tool in Windows. See OPTION THREE in-order to upload the CBS log file.


Note   Note
- : After all of the above : -


Please Follow.
Quote   Quote: Originally Posted by Arc View Post
information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Please enable driver verifier following this TUTORIAL | But using these settings:
Quote:

  1. Go to Start and type in "verifier" (without the quotes) and press Enter
  2. Select "Create custom settings (for code developers)" and click "Next"
  3. Select "Select individual settings from a full list" and click "Next"
  4. Select everything EXCEPT FOR "Low Resource Simulation", "Force Pending I/O Requests", "IRP Logging" and click "Next"
  5. Select "Select driver names from a list" and click "Next"
  6. Then select all drivers NOT provided by Microsoft, Unknown, or Macrovision and click "Next"
  7. Select "Finish" on the next page.


My System SpecsSystem Spec
05 Jan 2014   #23
adabisi

Windows 7 Ultimate 64 bit
 
 

I have returned the PC back to the store, they are replacing the motherboard, which is the next suspect.

Haven't tried any of the scans you recommended yet, hopfully i wont need to.
My System SpecsSystem Spec
.

07 Jan 2014   #24
adabisi

Windows 7 Ultimate 64 bit
 
 

Hey!

its been two days without crashes after they have replaced the motherboard.


But i have noticed something that i am not quite sure of. I bought 4 G.Skill modules which are 1600Mhz, but speccy says differently, is that normal?
My System SpecsSystem Spec
10 Jan 2014   #25
YoYo155

Windows 10
 
 

Good news !
And yes that is normal, DDR or Double Data Rate will show up as half of the actual speed,
so 800*2 =1600.
My System SpecsSystem Spec
11 Jan 2014   #26
adabisi

Windows 7 Ultimate 64 bit
 
 

Thanks bro!

תודה רבה אח שלי עזרת מאד בשמירה על התקווה.
My System SpecsSystem Spec
11 Jan 2014   #27
YoYo155

Windows 10
 
 

It really is my pleasure !
Thank you for reporting back .

(and that is a first on here ).
My System SpecsSystem Spec
Reply

 BSOD help (bad pool header & irql less or not equal)




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD on Steam Update, Bad Pool Caller or Bad Pool Header, no dmp files
Good day all, I hope someone can help me with a consistent BSOD problem I've had today. Every time my Steam client starts up and attempts to download its latest update, I get a BSOD with a Bad Pool Caller (one time out of about a dozen crashes it was Bad Pool Header instead). I have tried the...
BSOD Help and Support
Multiple BSOD & Reboots IRQL, Bad Pool Header, System Service Exceptio
Hey W7 People, I have an older Asus that was a gaming PC in its hay day (check specs) and after the last windows updates I'm getting crazy random BSODs. Usually always after it has been sitting a while like a day or so. Then I start it up and it BSODs at the login screen. It'll get stuck at...
BSOD Help and Support
BSOD BAD POOL CALLER, IRQL not less or equal
Good day to all. I've been having random BSOD everytime i start up the computer. It will bluescreen and begin to physical memory dump. And when i start booting up the second time, and select start window normally, i can boot to window like normal. I've uploaded the dmp files from...
BSOD Help and Support
BSOD on 2 seperate pc's. Bad pool header and Irql less than or equal 2
Hello everyone! This is my first post here so bare with me. My friend is having some bsod problems and it seems to be triggered by flash (youtube) and torrenting. I have attached the log indicated by your bsod instructions. I hope i did that right im not 100% sure. Not only that my pc is having...
BSOD Help and Support
Frequent BSOD. First Bad Pool Header and now IRQL Not less or Equal
When using verifier I kept getting the BSOD at the start stating that my drivers were messed up. However without verifier I can usually boot but I get a frequent BSOD. The most recent one stated IRQL Not Less or Equal. If anyone can point out which driver might be the one causing this it would be...
BSOD Help and Support
BSOD mostly MEMORY_MANAGEMENT also sometimes IRQL & bad pool header
So ive been getting BSOD once or twice a day with almost always the message: MEMORY_MANAGEMENT I did windows memory diagnostic tests a few times, it said i have hardware problems,Im asuming its bad memory or RAM. I thought my graphics card i installed is causing the problems,but i took it...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 14:03.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App